Search results

  1. O

    PVE Wont Start (Freezes) After Apt Package Install

    Once again :): What is the output of it?
  2. O

    PVE Wont Start (Freezes) After Apt Package Install

    You can recover as described in the documentation linked by apoyen : "the config.db according to this documentation : https://pve.proxmox.com/wiki/Proxmox_Cluster_File_System_(pmxcfs)#_recovery "
  3. O

    PVE Wont Start (Freezes) After Apt Package Install

    There is no apt --fix-broken install executed in the picture. Only apt-get upgrade -y Have you run apt --fix-broken install actually? What is the output of it?
  4. O

    ClamAV on PMG not detecting malicious PDF (VirusTotal flags it as infected)

    I've checked. "8/64 security vendors flagged this file as malicious". So it may or may be not malicious. Anyway, ClamAV at virustotal isn't detecting it (yet?). So it's no surprise that yours isn't.
  5. O

    ClamAV on PMG not detecting malicious PDF (VirusTotal flags it as infected)

    Hi. Does ClamAV at VirusTotal detect it as malware? [1] If not, then it's expected that your ClamAV doesn't flag it, either. If yes, then you can investigate, why yours doesn't. [1] I'm asking because at the moment I can't download the attachment and check it myself.
  6. O

    Missing chunks again

    No :). https://pbs.proxmox.com/docs/maintenance.html : "Prune lets you specify which backup snapshots you want to keep, removing others.When pruning a snapshot, only the snapshot metadata (manifest, indices, blobs,log and notes) is removed. The chunks containing the actual backup data and...
  7. O

    Proxmox VE 8.4.14 - Chrony Not Syncing Time

    This directive is one of the not default directives in your config. I'm not saying it is bad. I admit I'm not sure after checking the manual if I understand its meaning. I have never used it. In my Ubuntu workstation and in my PVE host it isn't used at all. And the machines always synchronize to...
  8. O

    Proxmox VE 8.4.14 - Chrony Not Syncing Time

    Welcome to the Forum! Out of curiosity I "googled" some longer time and haven't found a reason / a solution. I'm out of ideas apart from this: you have written that the chrony.conf files in the PVE nodes are identical to these in the Ubuntu servers. Is there any chance that there is an...
  9. O

    [SOLVED] Newbie - Updates not going well.

    Like in this example: # ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host...
  10. O

    Can't access to web interface or SSH after fresh install

    Seems that there is something in the rest of you network that doesn't let the traffic. A router, a switch, a Wi-Fi, a firewall... I don't know the details of your setup so I don't know what is the reason :-(. Try to start from the situation in which it works and gradually approach the setup...
  11. O

    [SOLVED] Newbie - Updates not going well.

    Until you show us the details of the network configuration, we can't help. Can you post the outputs of these commands issued in the PVE host. In the <CODE> tags, please. ip a ip route cat /etc/network/interfaces ping -c 3 1.1.1.1
  12. O

    [SOLVED] Newbie - Updates not going well.

    Welcome! Seems that you have some network problem. Does your Proxmox hypervisor have an access to the Internet? Does your (Sophos or other) firewall allow it? Can you ping 170.130.165.90? (I have verified it answers to ping, at least from my place).
  13. O

    Can't access to web interface or SSH after fresh install

    But we can see that every adapter is disconnected but Wi-Fi. Disconnect Wi-Fi and configure (wired) adapter.
  14. O

    Can't access to web interface or SSH after fresh install

    Yes. No :-). Disconnect WiFi in the PC. Start from the most simple setup. No WiFi, no router, no switch. Only: PC ------- ethernet_cable -------- PVE
  15. O

    Can't access to web interface or SSH after fresh install

    If the netmasks in the devices are proper and both the workstation an the PVE are in the same network (in the IP addressing meaning), then theoretically there should be no _router_ between them. Anyway, seems that something (a firewall?) blocks the traffic. Most likely the returning traffic. To...
  16. O

    Can't access to web interface or SSH after fresh install

    In the PVE please install "tcpdump" package ( apt-get update ; apt-get install tcpdump ) (unless it's already installed - I don't remember). Check what your workstation's IP address is (may have changed in the meantime because of DHCP). Then execute tcpdump -n -i any host...
  17. O

    pipelined request failed: inserting chunk on datastore

    Doesn't it nullify PBS' method for garbage collection?
  18. O

    Can't access to web interface or SSH after fresh install

    Yes. But I asked about IP address of your workstation from which you can't ping the host :). Edit: sorry, you wrote about ssh and GUI.
  19. O

    Can't access to web interface or SSH after fresh install

    Welcome to the Forum! We don't know what is the IP address of your workstation. It's difficult to help you without it. BTW, it's better to send information in textual form, not photos. As you have the physical access to the host, you can copy the output of the commands to a text file, then...
  20. O

    Configuration check - EXT4 for Proxmox / VMs / LXCs on single NVME SSD, ZFS on 2xHDD for file storage

    Without some longer thinking I can't see any error in your conception, so it's probably OK :). To that schema I would add backuping of the important files of the hypervisor and bare metal PBS. I have read quite many posts that it isn't worth doing... That it's easier to reinstall a clean...