Search results

  1. S

    Create a local virtual switch without using a physical port

    Please use the command traceroute in order to see what is the path of the packets traceroute <VM_IP> Can you provide me your PVE network configuration? Thanks MM
  2. S

    OPNsense: barebone or include in Proxmox cluster?

    install opnsense on a proxmox VM is a good idea, but if using your cluster enviroment is not safe enoght for you, Y can use the carp solution of opnsense with a slave opnsense on a different HW system. Network interfaces, must be configured on the same broadcast domain.
  3. S

    How do I assign multiple vlans to a VM?

    y can create 2 o more linux vlan (with no ip) on an interface and then cretae a linux bridge.
  4. S

    Proxmox VM cannot ping other proxmox VM on same node. Host PC cannot ping proxmox vm.

    Also, do not disable the firewall on windows, but create a rule to permit all. Then try again
  5. S

    First time install. Cannot log in from browser.

    Hello, have you tried pinging devices on your network from within Proxmox? If you have more than one Ethernet port on the Proxmox, have you tried pinging by changing the network port? EF
  6. S

    Problem when i proceed a clone of a template (got timeout)

    what appen if you try to delete and recreate the nfs storage? Do you have some errors?
  7. S

    Create a local virtual switch without using a physical port

    Can you provide me more details in base on the image below? From what I understood, you want to connect some VM each other by using vmbr1 right? Give me and example. Thanks MM
  8. S

    ceph warning post upgrade to v8

    Be sure that you have the last PVE7 version as well as the last Ceph 17.2.6. If you want to upgrade Ceph before upgrating PVE7 to 8, please consider these steps: #one node at a time apt update apt dist-upgrade After you upgrating both PVE and Ceph, you have to restart ceph services systemctl...
  9. S

    [SOLVED] Migrate Windows VM from kvm to Proxmox (BSOD)

    Many time ago I have the same issue but with win2k12, The solution was to prepare the windows machin with ide drivers. I not sure can resolve your problem to. And i use the clonezille migration metod. - make sure that you have standard IDE drivers enabled, use the mergeide.reg...
  10. S

    USB in Host?

    Hello, have you tried following this guide https://pve.proxmox.com/wiki/USB_Devices_in_Virtual_Machines ? An example of a command could be: qm set XXX -usb0 host=0d8c:013a, where XXX is the number of the VM to which you want to connect the device.
  11. S

    Migration from VMWare ESXi to Proxmox

    I know is a different metod, but if I have well understud maybe you can use the clonezilla migration system, I have do many migration with this system and normaly is workin well https://pve.proxmox.com/wiki/Migration_of_servers_to_Proxmox_VE#Clonezilla_Live_CDs
  12. S

    For Best Performance - Proxmox Cluster with CEPH or ZFS?

    I would not recommend deploying a cluster with 2.5Gb connectivity for Ceph in a production environment. This goes against Ceph's best practices. Additionally, having such a low number of OSDs increases the likelihood of storage loss. Just think, with a 1Gbps network, it takes approximately 3...
  13. S

    VM stuck/freeze after live migration

    Thanks for your answers.. In general, It seems that the problem occurs when you migrate from a node with CPU Xeon to CPU E5-2630 and viceversa. Migration between CPU Xeon I have no problems. Can you confirm it? Bye
  14. S

    VM stuck/freeze after live migration

    Hi Kellion, I still have the same problem. I haven't upgraded the PVE yet to the last version 7.3. Perhaps with the last kernel version the problem could be fixed? I hope so...:mad:
  15. S

    VM stuck/freeze after live migration

    This is my current cluster configuration: PVE1 32 x Intel(R) Xeon(R) Silver 4110 CPU @ 2.10GHz (2 Sockets) Linux 5.15.39-3-pve #2 SMP PVE 5.15.39-3 PVE2 32 x Intel(R) Xeon(R) Silver 4110 CPU @ 2.10GHz (2 Sockets) Linux 5.15.53-1-pve #1 SMP PVE 5.15.53-1 PVE3 40 x Intel(R) Xeon(R) CPU E5-2630...
  16. S

    VM stuck/freeze after live migration

    The problem occurs in these pve below here: pve3: Intel Xeon processor E5-2600 v4/ v3 family (up to 160W TDP)* Dual Socket R3 (LGA 2011) pve4: Intel Xeon E5-2630 v3 2.4 GHz 8 Core Processor 20MB LGA 2011-3 BX80644E52630V3 CPU Many thanks
  17. S

    VM stuck/freeze after live migration

    This is the migration log: 2022-09-07 08:57:36 starting migration of VM 213 to node 'pve3' (192.168.253.58) 2022-09-07 08:57:36 found local, replicated disk 'local-zfs:vm-213-disk-0' (in current VM config) 2022-09-07 08:57:36 found local, replicated disk 'local-zfs:vm-213-disk-1' (in current VM...
  18. S

    VM stuck/freeze after live migration

    Hello everyone, I have a PVE cluster version 7.2-7 upgrated to the latest packets versions. I'm having troubles to figure out why some VM (both Windows and Linux) are in stuck status after live migration. Morover, this doesn't heppen for every host in the cluster. For example, If I migrate the...
  19. S

    Windows VM stopped - Out Of Memory

    How can you define about 31GB for zfs min? below my current arc_summary ZFS Subsystem Report Wed Aug 03 16:40:02 2022 Linux 5.15.35-2-pve 2.1.4-pve1 Machine: pve (x86_64) 2.1.4-pve1 ARC...