Search results

Got it figured out The following will list out all parameters for all modules currently loaded: cat /proc/modules | cut -f 1 -d " " | while read module; do echo "Module: $module"; if [ -d "/sys/module/$module/parameters" ]; then ls /sys/module/$module/parameters/ | while read parameter; do...

I am hitting the power write governing because of the default wattage limit of 25 watts. Anyone know how to bump that up? I found this, but I cant find the fio-config app: fio-config -p FIO_EXTERNAL_POWER_OVERRIDE <device serial number>:<power in watts> Also found that it can be set using...

https://github.com/RemixVSL/iomemory-vsl Just did an install this morning. You just need to replace the steps of downloading the iomemory-vsl zip file with the download from the above github link with a rename of the unzipped directory. root@odin:~# uname -a && fio-status -a Linux odin...

Are you guys grabbing the latest version( aka master ) of the driver? Using the one listed in the first post and trying to compile it against the 5.30.X versions of the kernel will only fail to build.

Same here. You just need to download and install the latest drivers. Only bad side affect is that I lost everything that was on the drive when the new drivers where installed. I had recent backups so not a big deal.

Made the mistake of upgrading, now gpu passthrough is broken. The VM fails to start up with the helpful error message: "failed: got timeout". Basically the same thing is syslog. If I remove the GPU, the boots and runs fine. Add the GPU back as passthrough, fails to start. Is there any...

On one of the VMs: [root@sauron gondor]# fio --filename=/gondor/test.dat --name=random-write --ioengine=posixaio --rw= randwrite --bs=4k --numjobs=1 --size=4g --iodepth=1 --time_based --end_fsync=1 fio: time_based requires a runtime/timeout setting random-write: (g=0)...

OK, I did use /dev/random and the host results where in the low 200MB/s range. How much of that is CPU number generation and how is disk performance. For several SSD or 15K SAS drives striped in RAID0, I would expect the write performance to be in 800+ MB/s range.

OK, I have been chasing a performance issue transferring data between two proxmox hosts and I cant seem to figure things out. The general issue is that I am seeing really low transfer rates of data between the machines. Copying a large 10GB file is only getting about 80MB/s in transfer...

OK, finally got some time to play around with things. I broke apart the bonds and just have single physical ports that go into the bridges. I current have one bridge that has a single 10gb port where the port and bridge have a MTU of 9000 for jumbo frames. I have a single linux VM...

I am trying to do something similar here. When I run 'mdevctl types' all the 'Available instances: ' counts are zero. What does that mean?

That is completely false. Under full load a 64 thread system will out perform a straight up 32 core machine, but will not match the match the performance of a true 64 core machine with no threads. Many, many, many years of running F@H on high count thread and core machines has proved that...

How is that 'big'? You have 6 threads for the VM and the host has 10 threads sitting around for its own use. I could see having 15 threads allocated to VMs and only 1 thread left for the host usage being over taxing on the system. For me, server A has 48 threads with 36 vCPUs allocated...

What do you mean by making the VM too big???!?! The VMs are using the default CPU type of kvm64 and using the the VirtIO NIC type with Multiqueue enabled.

Both the host and VM have low CPU utilization while data is being transferred. The VM does have multiple vCPUs still in IO wait. You are right, I was thinking it was giga bits per second, but it is giga bytes. About 1/4 the expected through put. Anyone have any ideas on what might be...

Just about every way has this behavior: sftp, rsync, copy across NFS, iSCSI, and PBS backups/restores. iperf3 show about 2.26 GBytes/sec going from VM to VM across the bonded bridges which is expected. In theory going from one ramdisk to another should see about the same results, but I am...

I got two proxmox servers that are running the latest non-production updates of 7.x. Both machines have a dual 10gb rj-45 NIC installed with a pair of cat7 cables connecting the two machines together( port 0 on machines A direct connect to port 0 on machine B and port 1 on A direct connect to...

Cool, thanks for the info Dunuin. This is going to be real helpful. Let me a couple of the combos and I will report back.

I ended having to do the iso modification where you delete the requirements checker ddl file, build the iso, and then install Windows 11. I used the default KVM64 cpu type.

I am interested in feedback, but I was not asking what new hardware to buy and how to structure things. I simply asked why is there a performance different between proxmox and another OS using the same hardware. Obviously the usage of the hardware will be a bit different and that is what I...