Search results

Interesting, while trying to get away from using SSDs on an OSD node, it seems my performance really tanked. Down to <100MB/s recovery and benchmark rates (compare to ~1000MB/s when using the combined flash storage). I am currently (slowly) rebuilding everything and will be stuck recovering for...

Yep, That is a winner. My apologies for the trouble, and thank you for your time. I really appreciate it.

Sorry for the delay. Just double checked, there does not appear to be a /29 in my /etc/network/interfaces files... Anywhere else I should be checking?

See: Simply changing the noted command to 192.168.2.0/24 returns: ip: '192.168.2.22' However, this task error is appearing in the GUI, and I can't see how to update the command. Help!

Hello, I am looking at reworking my ceph setup. I have 26 8TB SAS drives, and independantly I have 16 inexpensive consume SSD drives, all uniformly two models. Before I go through the setup, I wanted to double check if it makes sense to use these ssds as bluestore db+wal devices, or if I am...

Hello all. Same issue popped up for me in the last couple of days some time. I imagine with the recent proxmox upgrade, but ceph also bumped up a version. Similarly, I installed the noted package no all nodes, and am unable to `ceph health` without: `HEALTH_WARN Module 'volumes' has failed...

I have several 8TB seagate backup drives which were purchased both before the SMR news in the drive world, as well as prior to my knowledge of SMR drives. As I am about to install a proxmox backup server at my home cluster, I wanted to confirm if SMR drives would work as storage. Putting this...

Post saved me now too. Thanks bud!

Here you go! CA 'mlx4_0' CA type: MT26428 Number of ports: 1 Firmware version: 2.10.720 Hardware version: b0 Node GUID: 0x0002c903000c241a System image GUID: 0x0002c903000c241d Port 1: State: Active Physical...

Hey, Obviously I can't vouch for the below being the right fit for you, and frankly it likely install a bunch of crud you don't need, however, when I install a new node with a connectx-2 card, I run the below as part of my setup, and it just works. YMMV, and generally you may want to research...

Thanks for the reply, To close the loop and share my own learnings since the OP: I did end up reinstalling proxmox from scratch, and torched the VMs previously on the machine. Chalked it up to a learning opportunity (the whole point of this for me anyways), and set in place much more rigorous...

Revised original post, missed the link the first time. woops

To be clear, this is the host itself. Is there some type of transparent compression or zero hole punching enabled with lvms or something?

# lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 10 (buster) Release: 10 Codename: buster # uname -mrs Linux 5.3.13-3-pve x86_64 lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order...

Here's a google sheet full of my testing: https://docs.google.com/spreadsheets/d/1JJhZqxVbF7KsF_uLEOd7tOf-cCyV24mY_4Uc3vOeVeY/edit#gid=194361085 When copying files to or from anywhere, I am limited to ~350MB/s transfer speed. By anywhere, I mean: To and From a Hardware Raid - 8 (cheap...

Additionally, others appear to be mentioning this same issue..: https://forum.proxmox.com/threads/lots-of-logging-when-using-openiscsi.54283/ https://forum.proxmox.com/threads/iscsi-storage-vm-crashing.55650/#post-256389

Take that as a no then... haha Multipath seems to be working great, but still it is a constant onslaught of the same message: [469950.289741] sd 7:0:0:1: alua: supports implicit TPGS [469950.289772] sd 7:0:0:1: alua: device naa.60014052555fa1ad6ffed4783d866fd9 port group 0 rel port 2...

Following the bug report in the provided link, and I see that 430.64-4~bpo10+1 is now available! For the other noobs who need a solution spelt out for them, here is what worked for me: echo "deb http://deb.debian.org/debian buster-backports main non-free" >> /etc/apt/sources.list apt update...

Thanks Tom, I came across that thread when trying to debug on my won, however the very first command is inhibited by the same error. See: root@server:/mnt/lizardfs/ssd# apt install devscripts Reading package lists... Done Building dependency tree Reading state information... Done devscripts is...

Pastbin of cat /var/lib/dkms/nvidia-current/418.74/build/make.log: https://pastebin.com/i7fnCyh3 Edit: Having trouble figuring out the proper commands to help provide information from my end, is there a proxmox forum how-to or something, to help beginners identify what they should attach to...