Search results

I tried a similar problem on my server with 1.6. Then i tried install proxmox with 1.5 iso instead, it worked perfectly, try 1.5 instead, if it works, you can just upgade Proxmox to 1.8.

Good work Proxmox team! I will never regret the sudden, not tested change I made ​​in my production environment from VMware to Proxmox. And congratulations on the 3 years!

you can also install dhcp3 On a debian install it with following command: apt-get install dhcp3-server http://www.debianhelp.co.uk/dhcp.htm on my own setup i have used a small openvz with Bridged Ethernet (veth). It works really good, this machine works as dhcp and tftp (pxe).

Hello, I did add the disc as /dev/sdd in the host file, and its working really good, and gives pretty good performance, next test is to add it same way but as esata instead of usb.

Hello, Is there a possible way to share a harddrive to a Windows KVM ? i got a usb harddrive connected to my proxmox server, is it possible to see it from my windows kvm so that i can read/write files to this disc? I have tried share it with hostusb direct, but the windows machine gives...

Thx. for info. I think im going to buy either INTEL SASWT41 RAID SAS Controller PCIe (SASWT4I) or a Adaptec RAID 2405

Thx, I found another one, this one is a bit more expensive. Promise Fasttrack TX4310 SATA RAID Controller

Hello Again, This proxmox machine are being used at my home primary for sandbox, and secondary as my own nas server. Performance is always nice, but atm. it's not so important. Do you people think i can use this controller...

are there some cheap preferred raid controller with 4 SATA ports that can run raid 10? And that works with Proxmox?

its this raid controller i bought. http://www.amazon.co.uk/gp/product/B003MAGXWO/ref=oss_product Raid Controller Leaf LC3124i Rev 6.0 following distributions encludes already the driver: Archlinux, Centos, Debian, Frugalware, Gentoo, knoppix, RedHat, Suse, Ubuntu

im trying to install proxmox with hardware raid on my server, but it doesn't fint my 1+0 raid. When I have to choose harddrive to install proxmox on it finds the single 1,5 TB discs, not raid made from my 4 x 1,5 tb it only finds following discs /dev/sda /dev/sdb /dev/sdc /dev/sdd my raid...

I would also prefer to be near the server, but it wasn't possible, im living in Denmark, and the server is located in Germany. Here is how I did: Shutdown server and KVM over IP. Server Center Technicians installed hardware raid. Powering on server and KVM over IP, boot cd-media with Drive...

Hello Again. Just wanted to give latest news atm. I have rolled back 2 of 3 vm's and working on the last one. No problems after I used the proxmox 1.5 install media, and upgraded after installation.

My server has the raid controller now, and is being installing proxmox atm. when i tried drive redirection with my proxmox-ve_1.6-5261-4.iso from my laptop on a 2mbit upload connection in DK to my server in Germany, it failed in right after the page where it shows press F2 to verbose, after...

is the snapshot mode good enough? Or what mode should i use when i make the backup?

I think this is my solution. I have a 500gb disc attached local on the server, this disc will not be touched. I will copy the raw images from kvm's and do transfer vzdumps from OpenVZ to this disc. Then tell server center to install hardware raid controller, and reinstall my server with...

Hello Proxmox community. My host server i got today, doesn't have a hardware raid controller. I have been talking to the server center, and they can add a raid controller. But when they add this raid controller, i will need to reinstall my server. What data should I copy, and what is the...

Have you made it working?

Have you made it work?

Did you have any problems installing this software? proxmox:~/usb-server# ./installer.sh install-server *** Installing IncentivesPro USB Server + USB Client v.2.0.8 *** No kernel module found for your kernel version. Will try to compile from sources. *** Compiling kernel module...