Search results

Hi, I've migrated a VM from a node to another using the CLI and --online --with-local-disks and it worked perfectly! However, when it was time for the replication's job to the third node, this one failed : 2018-09-10 06:56:00 145-0: start replication job 2018-09-10 06:56:00 145-0: guest => VM...

Here we go! Bought the three servers and installed Proxmox with ZFS (2 zfs pools on each system) I only have one issue (if we can say it's an issue) : it takes about 12 minutes from powering to show me the grub. BMC from SuperMicro takes about 2 minutes and then it's like "blackout" until the...

Hi Udo, I've tested in my lab to have A and B replicated to C. In case A or B are going down, I should be able to resume normal operation (or nearly) on C and move back the VMs on A or B when the failed node comes back. However, with ZFS, I've seen that I'm unable to create a replication task...

At the end, I'm tending to replace the HP servers with some Supermicro servers with the following (2x) : 1029P-WTRT 2 x Intel Xeon Silver 4114 Samsung 256GB DDR4 2666MHz ECC RDIMM 2 Port SFP+ 10GbE Adapter 3 x Seagate 2TB Enterprise SATA 6Gb/s 2.5" (RAID 5) > rpool-hdd 5 x Samsung SM863a 960GB...

Just to know, you ended up by using HW Raid with ext4 ? Or ZFS on top of it ? Thanks!

Hi! Thanks for your message. About the updates, all of them will be installed and I'll get an onsite support for 3 more years, so I'm not so worried about this. My main concern is to buy an hardware I won't be able to use ZFS and their advantages. Of course, if really needed I will be able...

Hi, We'are going to purchase some refurbished servers and that one is our preferred for now : HP Proliant DL360p G8 Gen8 (SFF) 2 x Intel Xeon E5-2697V2 256GB Registered ECC DDR3 HP Smart Array P420i 2GB Cache 1 x HP 1Gbit Ethernet 4-Port 331FLR FlexibleLOM Adapter 634025-001 1 x LAN...

Thank you for your replies. At the end I just created two A records "mx.domain.tld" in the DNS zone with the two different MX IP addresses and therefore I guess it would help in case one of them is having issues.

Hi, I do have 2 nodes (Cluster) of Proxmox Mail Gateway and also two relays after them (mx1 and mx2) where the mails get finally dispatched. However, I see I can only set one relay for all mails (currently only mx1). I expected to have the ability to set another one as a backup ? Is there a...