Search results

Attached is the log of the verification.

I deleted the backup for that VM and ran a complete new backup last night. I noticed that the "Change protection" was not working but is now. I am running the verify now, will post results soon as complete.

Not a full backup. No, not encrypted. I'll try the verification next.

Yes it is a Windows10 x64 and C:\ drive is NTFS.

OK Just went in and tried to connect, other folders in that VM look ok, you can see the files. Only Partition 2 (498.86GB) that does not open. Attached jpg of error and log. [2024-12-16T13:47:16+00:00] PBS file restore VM log Spectre V2 : Kernel not compiled with retpoline; no mitigation...

Here you go from /var/log/proxmox-backup/file-restore [2024-12-09T07:25:08+00:00] PBS file restore VM log Spectre V2 : Kernel not compiled with retpoline; no mitigation available! [init-shim] beginning user space setup, version 1.0.0 [init-shim] booted Linux version 6.5.11-pbs-restore...

Hi On PBS. Trying to restore files on one of the VM's fails (104 Win10). All others restore is fine. I read somewhere to do a chkdsk /r /f /x would sort it out. Made no difference. See attached image.

Hi, I have a Levovo ThinkSystem DE2000/DE4000 with 60TB of backup space. I have built a i7 PC with Proxmox Backup Server and am going to attach it to the DE2000 with a 10GB nic. I will be trying to backup the Lenovo/IBM SR850 server which has 5TB (1.5TB used) and 16 VM's. I don't see an NFS...

After upgrade from 8.2.2 to Proxmox 8.2.7 blue screened my 2003 server, Switching scoket type from host to KVM64 solved the problem. Hardware was a AMD Ryzan 5 2600x.

Just to explain the setup. The Lenovo SR850 is replacing the current Lenovo X6 (Live Server). We are still only testing the SR850. The network is in place and both servers are connected to it. The Lenovo X6 does not have any 10GB NICs (only 1Gb CAT5) but is connected to across the same 300m old...

These are the cables I ordered. I only order multimode for this site because the main 300m cable joining the the two buildings is a multimode. This cable is very old and I did not expect it to run at 10GB, but it dose. This is a ping test from another Proxmox Win10 VM (i7 PC) back to a Win11...

Yes the card and modules were ordered from Lenovo. All are multimode going to a Zyxel switch with a Multimode SFP. Blue light on at both ends would sugest a physical connection. Not sure about the LR/LC. Fibre patch lead is around 100m long back to the switch in another room. Here I am pinging...

Also the SR850 Bios shows that they are up and link speed is 10GB

Getting partial pings back on the Fibre but none on the 10GB Cat6

Output of cat /etc/network/interfaces root@qbgw:~# cat /etc/network/interfaces # network interface settings; autogenerated # Please do NOT modify this file directly, unless you know what # you're doing. # # If you want to manage parts of the network configuration manually, # please utilize the...

ens2f0np0 is not connected... but ens2f1np1 is connected to the Fibre. Here is the output of ethtool ens2f0np0 oot@qbgw:~# ethtool ens2f0np0 Settings for ens2f0np0: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full...

root@qbgw:~# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host noprefixroute...

lspci -v next attached

Hi Trying to get both of these NICs to work on a Lenovo SR850 v2 on Proxmox 8.2.2, have all updates loaded. Server Bios firmware has been updated to latest 227.1.115.0 for both of these cards. Adapter: Broadcom NX-E PCIe 10Gb 2-Port Base-T Ethernet Adapter (PCI Slot 1) Adapter: Broadcom 57414...

OK addded the blacklist. It has connected but extreamly slow, only get 1 ping in 4. I did a reboot after blacklist.