Search results

Can you post your VM config? The Task Error you posted is hard to read. Also, do you really have two socket CPU? Do you mean to use 1 Socket with 2 cores? kvm_init_vcpu error is usually related to having wrong cpu settings.

Enable RDP in your VM. Select SPICE as your graphics. Start your VM. At the start of the VM open console and let it open in virt viewer. It should at least show preboot information, e.g. bios, windows loading logo. If it still doesn't show anything RDP into the VM and see device manager if the...

Change it to SPICE and installing the QXL driver.

Do you mean second IP address to log into proxmox console and web console?

Marking this post as solved. Will be fixed in future update. For now adding prefix manually, as noted above, works.

What graphic settings do you have enabled? SPICE, Default, STD VGA, etc?

I also tired making ...00105 ID as the error message, it says the ID already exists. So it does look for existing uuid. As noted by apkoval, putting full PCIID works fine.

Since the new 5.3 Kernel is release i finally can use gGVT with coffee lake, i3-8100. After adding the hostpci0: 00:02.0,mdev=i915-GVTg_V5_4. It fails to start. The error as follows: kvm: -device...

One option that was possible was backup the VM/LXC. Then to edit the config file for the backup, for example 10G drive to 5G drive. Then restore the backup. When it restored it had the size of the drive you edited the config to.

Since Coffee Lake GVT-g is not supported yet in the current Proxmox kernel (5.0.18-1pve), I solved my issue by using "pci-stub.ids=xxxx:xxxx" function.

I recently bough a supermicro c246 chipset motherboard with built in BMC graphics. My processor is i3-8100 with built in igd. I am trying to use the intel graphics for GVT-g but i would like proxmox to display the console only using the BMC graphics so if something goes wrong i can use iKVM...

Glad it worked out for you! If you have enough RAM I would keep ballooning driver turned off. Windows 10 is pretty good with RAM usage.

Windows does not have drivers for the VirtIO SCSI. There is no generic model of the driver. Windows will either blue screen or will have something like NTDLR not found and will not load. Adding second drive to install the SCSI driver in Windows. The reason i said to install the second drive is...

Try turning off Ballooning, it should help with performance. As for the changing the drive, I don't remember if you can through GUI but from the conf file you can change it. I will let you know on that soon.

I would change the network to VirtIO and disk drive to VirtIO SCSI Controller with IO Thread enabled. Changing the disk drive to VirtIO SCSI Controller to boot drive will make the system unbootable. Since windows is already installed, i would add extra drive with VirtIO SCSI Controller, load...

That's great news! Still curious why it wouldn't work.

I REALLY apologize on replying so late. I didn't see the notification on the reply. Do you have any update on this or are you still having the issue?

On /etc/default/grub: GRUB_CMDLINE_LINUX_DEFAULT="intel_iommu=on video=efifb:off,vesafb:off" On /etc/modprobe.d/vfio.conf options vfio-pci ids=8086:1912 disable_vga=1 The rest seems okay to me. Edit: Dont forget to update grub and initramfs. Also, the screen will go blank after couple of...

I have no effect on performance on KVM64. Others have indicated that having a ZIL SSD helps significantly since VMs does sync writes.

It will extend the life of the SSD. That is one of the reasons why enterprise drives are weird sizes. They come over provisioned from factory which is not user changeable.