Search results

  1. T

    proxmox 8.0.3 and 7.4-16 with smartmontools 7.2-pve3 and 7.3-pve1"program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO"

    I have tried backported 7.4 ("7.4-2~bpo12+1" is the exact package version), but I still see those messages in journal. And I use Zabbix to monitor HDDs temperature with help of "SMART by Zabbix agent 2" template.
  2. T

    [SOLVED] I can't start VMs together, only by one

    So, I added "pcie_acs_override=downstream,multifunction" to grub commandline options and now they are in different iommu groups and VMs are running. Sorry for bothering you =)
  3. T

    [SOLVED] I can't start VMs together, only by one

    I've just found out, they share same IOMMU group. So, I have to figure out, how to separate them.
  4. T

    [SOLVED] I can't start VMs together, only by one

    I have two VMs on one node. The both use PCI devices, but different. And they can't run at the same time together. Error from first: kvm: -device vfio-pci,host=0000:02:00.0,id=hostpci1,bus=ich9-pcie-port-2,addr=0x0: vfio 0000:02:00.0: failed to open /dev/vfio/1: Device or resource busy TASK...
  5. T

    [TUTORIAL] PCI/GPU Passthrough on Proxmox VE 8 : Installation and configuration

    So, it did boot up then? What is its status after a while: running or stopped? If it's running and you can't get access to console, it must be your OS, what redirects display output to the PCI video card. Network interfaces are changed after changing VM type - kernel sets another NIC names, so...
  6. T

    [TUTORIAL] PCI/GPU Passthrough on Proxmox VE 8 : Installation and configuration

    And what status does virtual machine's log show? If you will double click the line it will show full error message.
  7. T

    [TUTORIAL] PCI/GPU Passthrough on Proxmox VE 8 : Installation and configuration

    Have you tried q35? https://pve.proxmox.com/wiki/Qemu/KVM_Virtual_Machines#qm_machine_type
  8. T

    [SOLVED] Any one tried installing Whonix on Proxmox??

    @nomadmike, if you still have this problem: try to remove and add vmbr3 to the whonix-gateway. I had same issue, and it looks like gateway vm hardwired, that the first network is internet, and second is internal. If you re-add the internal network, it should take second place.
  9. T

    Proxmox installation "Trying to detect country"

    That worked, thanks! I used old ISO, 8.1, so I didn't test patch from @cheiss
  10. T

    [SOLVED] local-lvm became inactive after joining a cluster with different disk structure (no such logical volume pve/data)

    Yes, you are right. I have overseen, it wasn't "local-lvm", but "local-zfs". I tested same install in VM and found it out. Now, I (re)added ZFS "rpool/data" in the "Datacenter > Storage" and can use it again. So, case is solved :)
  11. T

    [SOLVED] local-lvm became inactive after joining a cluster with different disk structure (no such logical volume pve/data)

    I did, thanks. Now it exists only on older nodes. How to recreate it now on the new node? Both GUI and pvesm add ask for Volume Group, which I supposedly, don't have on a node with single ZFS formatted disk.
  12. T

    [SOLVED] local-lvm became inactive after joining a cluster with different disk structure (no such logical volume pve/data)

    I had a cluster with classical disk roles: one for Proxmox OS, another for VMs. It worked. Then I wanted to add a simple small node with single disk for DNS and Ngynx. I've installed Proxmox there, choosing to format disk as ZFS. It was installed and created "local" and "local-lvm" storage. Then...
  13. T

    V2V, Zeit NICHT aktualisieren

    Über args Zeile: args: -rtc base=2021-01-01,clock=vm https://pve.proxmox.com/wiki/Manual:_qm.conf
  14. T

    Migration issue - storage 'zfs1-vps1' is not available on node

    Could you please give a link to FR?
Top Bottom