Search results

What brand and model?

certainly

hmm I have been running this system for around a year now but the amount of hours is but around 100 something days. I believe the data is more accurate than my memory so I must have been using a different setup earlier but for the life of me I can't remember

@Dunuin this is the read out of the ssd with 4% wearout smartctl -a /dev/nvme0 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.11.22-1-pve] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number...

@udo why do your pveperf results also include BUFFERED READS: xx MB/sec AVERAGE SEEK TIME: xx ms While mine do not? Anyone else knows?

zpool status pool: rpool state: ONLINE config: NAME STATE READ WRITE CKSUM rpool ONLINE 0 0 0 mirror-0 ONLINE...

ahh I could create a proxmox install using all disks and then later remove the wd black's and create a new raid 10 pool for vm's right?

I got impatient and installed proxmox 7 It went happily through the installation and I selected as installation options the first 2 samsung ssd's in zfs raid1. (just like last time (I did see the other 4 wd black ssds though but in the other thread it came to my attention to better seperate vm...

ahh my how brain surgery is not going well ;( I ended up placing 2 nvm'e in the 2 left over m.2 mobo slots. I also reconfigured the pcie configuration with slot one being 4x4x4x4 (as otherwise I will not see 4 disks on the ACI adaptor) Added a gigabyte GPU on slot 2 A evga GPU on slot 3 (and...

thank you @Dunuin once again an elaborate explanation to help me get in the right direction. I'll keep the boot nvme's seperate and will evenetualy move the vm disk locations. after I have installed 2 extra nvme's in the mobo m2 slots and also will be including the pci adaptor to house (for...

hahhah you're quick to jump to conclusions ability is even more advanced than that ;) Anyway @ph0x thank you for contributing non the less. I really mean that. It helps one stay on course. Even though in this instance it was kinda besides the point.

Understood, I have to make ends meet and deal with what I have. The misses is already on my rear end for having such expensive toys to begin with so I have to make due with what I have. Sure I can persuade the budget to squeeze in an extra 8 x 32gb ECC 3200MHZ memory but I need to do it...

Ok, I am now fully back onboard the ECC camp. Not that I ever left it but I was considering going for extra speed. Non ECC is now off the table for good. ECC for the win

Can you please elaborate? I am about to shut down this particular system and going to do brain surgery.

what would be more optimal in terms of random read/writes? simply adding new nvme's to the mirror-0 or create extra sets of mirrors each containing 2 nvme's? Also will it matter for either scenario if the nvme’s are not the same brand and model? They are the same size, in terms of what is...

current zpool status zpool status pool: rpool state: ONLINE status: Some supported features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer...

@Dunuin thank you for your detailed explanation. Much appreciated. Currently the Samsung SSD's have a wearout of 4 and 3 % after about a year of operation. Are there statistcs available on how many writes have been done in that time? The workload up until this time has been (I'll edit the...

Please forgive my ignorance. What made one think I was looking to do server stuff? (my thread opening post already edited to reflect this) I am looking for a non server workload. Just freakishly fast performance with the stuff that is available to me

OK, so coming back to the disk aspect of it all. One would say that having a single PCIe ssd (consisting of 4 NVMe's in raid 10(mirrored striped)) is better than putting in those same 4 NVMe's in the slots on the Mobo and have proxmox deal with the raid aspect? Ahh Before I make and edit to...

Hyper-V on Windows Server 2019 comes with it's own set of problems. It is simply not able yet (please believe me I have tried for 2 months before I setteled down to proxmox) to do proper GPU passthrough for AMD ryzen, RTX 2060+ setups EDIT: and also the SATA controller passthrough of at least 5...