Search results

Found some errors in the dnsmasq service, could be "no file" as It might only get created when dhcp offerd a ip. dnsmasq@zpvea.service - dnsmasq (zpvea) - A lightweight DHCP and caching DNS server Loaded: loaded (/lib/systemd/system/dnsmasq@.service; enabled; preset: enabled)...

Yes this file exists. root@PMX7:/etc/pve/priv# ls -lisah | grep ipam 191246 512 -rw------- 1 root www-data 740 Aug 21 13:54 ipam.db There are no errors in the logs, neither the node nor the cluster-log. vms come up with 0.0.0.0/24 as a ip-address Not sure bout the js-errors. anything i should...

I somehow broke IPAM and dnsmasq i guess. I deleted everything and recreated all with pvesh, the prev error is gone, but I still dont get IP-Adresses on any of the zones, although they have autodns-enabled and correctly defined subnet. Seems like I broke the ipam database or location where the...

Thanks! Do you know howto use --dhcp-range on pvesh? I looked at the api-viewer online but I dont get howto put in the range here. root@PMX7:~# pvesh create cluster/sdn/vnets/pveb/subnets/ --subnet 192.168.30.0/24 --type subnet --gateway 192.168.30.1 --snat 1 --dhcp-range...

Ok thanks, Ill delete everything and will use pvesh Seems like this is the right direction: delete sdn subnet object failed: zone 'sz10' doesn't exist in IPAM DB (500)

Thanks! Here you are. Edit 1: It might be a issue, that I edited the files, seems like creating a new sz a new vnet and new subnet via webui, does not lead to that issue.

I created 10 simplezones, each with its own vnet and subnet, I manually edited the files in /etc/pve/sdn and pressed apply via web-ui. This worked well, but I did some changes on /etc/pve/sdn/subnets.cfgand pressed applyagain, since then I cant get a ip adress on any of the zones (although...

In theory you could try to create (for example your 100g nic is called eno1/eno2) * bond0.VLANID in vmbr0 for vms (slaves eno1, eno2) * bond0.VLANID for mangement + ip (slaves eno1,eno2) * eno1.VLANID and eno2.VLANID for your iscsi (Create -> Linux VLAN -> interface.vlanid) Please test...

@elkan76 do you have any errors messages? Im not sure if the tool works on dell/hpe hardware, as they often have their own non-standard firmware.

Hallo :) VLAN-Aware yes bei vmbr1 braucht ihr wirklich eine vmbr0 für das Web-UI? Falls nein, dann einfach die vmbr0 entfernen und die IP direkt auf ens1f0np0 legen für was ist vmbr2? Ich würde empfehlen direkt mit dem SDN und einer VLAN-Zone zu arbeiten, das spart euch zukünftig Arbeit, weil...

You need high bandwith network between the esx and the pve host, also live import is risky to use, as a import failure might lead to data loss of newly written data while importing.

Please post the output of pvecm status are the vms locked? Whats the status in the webview, when you click on those vms?

Thanks for answering that quick! So this cant be done on system that have already been installed? Is this possible on a already installed system with pve 8.2? If yes, are there some commands missing (like git clone etc?) root@PMX4:~# export DEB_BUILD_PROFILES='pkg.pve-kernel.debug'...

We are still in need of getting kernel crash dumps up & running. Seems like the hardest part ist to get a dbg kernel. Can you explain how we can get it by using the documentation you mentioned...

Please try this, as this was the solution the last time I had your problem.

Was this a legacy (bios) vm or uefi? If uefi try: qm set 100 --bios ovmf

You do not have sata enabled. try to boot with sata0: PURELVM:vm-100-disk-0,cache=writeback,discard=on,iothread=1,size=90G,ssd=1 Make sure this works, if this works, process with my instructions above.

Hello, did you try to change from ide to sata aswell? Please try and post again, after booting successfully youll need to temporarily add a virtio-scsi disk, install the driver in windows, poweroff, remove the temporary disk and switch the bootdisk from sata to scsi0 and boot again.

I had that once because timeserver where not configured, try to configure them and retry.

Hello, do you know if this has been applied already? Im currently testing and I cant get it set up correctly. Seems like its still not working: Task viewer: VM 107 - Start generating cloud-init ISO can't find any free ip in zone sz01 for IPv4 at /usr/share/perl5/PVE/Network/SDN/Vnets.pm...