Search results

thanks for you time here is the results of your script : IOMMU Group 0 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller [8086:0150] (rev 09) IOMMU Group 1 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI...

Hi, I got a pcie sas controller, (LSI 9211-8i SAS SA) plug in the first pcie in another pcie i got a graphics card that i need to passthrough a VM. so my problem is that both card works well but not together.... when i start the vm that got the graphics card the other card just disapear... I...

hi, i finally received my card and after some try i made it works. so to make it work you have to plus in the first pcie port, that's really annoying but at least it works. I also update the firmware but that was more in the hope that it would make it works on another pcie port ... sadly it...

Don't know about you but i finally figure out that my actual problem was the router ... a static ip was set

ok thanks

thanks I don't know what stuff exactly change but i'm ashame because it's working so i'm sorry to bother you so i'm glad and sad because i waste so much time without knowing why... BTW in the console i got some message saying: vmbr0 entered blocking state vmbr0 entered disabled state vmbr0...

i can boot the vm if i change my ethernet to NAT but there i don't have internet inside the vm i don't know what to try :-( any ideas ? please

here it is: # pveversion -v proxmox-ve: 5.1-32 (running kernel: 4.13.13-2-pve) pve-manager: 5.1-41 (running version: 5.1-41/0b958203) pve-kernel-4.13.13-2-pve: 4.13.13-32 libpve-http-server-perl: 2.0-8 lvm2: 2.02.168-pve6 corosync: 2.4.2-pve3 libqb0: 1.0.1-1 pve-cluster: 5.0-19 qemu-server...

Yes I did after each test because a simple /etc/init.d/networking restart fail always

ip addr say: # ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host...

Hi, Just done a fresh install of the latest Proxmox on a Debian Stretch following the guide on the wiki. But network didn't work so i change to : cat /etc/network/interfaces # network interface settings; autogenerated # Please do NOT modify this file directly, unless you know what # you're...

I wasn't able to make it work. So i ordered another one. i ordered: https://www.ebay.com/itm/152702951288 thanks for the follow up

thanks for the idea i looked at var/log/messages and discover this: Nov 27 13:30:48 gladys kernel: [ 7.644037] ata14.00: qc timeout (cmd 0xa0) Nov 27 13:30:48 gladys kernel: [ 7.644101] ata8.00: qc timeout (cmd 0xec) Nov 27 13:30:48 gladys kernel: [ 7.900035] ata10.00: qc timeout (cmd...

you're correct thanks, i change the title also the hardware config and system is working perfectly with esxi and a gparted live. it seems that just proxmox don't work. thanks for your help. so with the uefi, the esxi and gparted live it's working but with proxmox only the lspci give result...

no one else has this kind of problems ?

hi, thanks for your help, # lspci -vvnn -s 03:00.0 03:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s Controller [1b4b:9230] (rev 10) (prog-if 01 [AHCI 1.0]) Subsystem: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s Controller [1b4b:9230]...

hi, I'm surprised that proxmox does not reognized my sata card when every other system recognyze it (esxi/debian,...) from my research it should be working out of the box like for the others because of the linux kernel that support it. But i wasn't able to make it work. what can i do ...