Search results

  1. M

    PCI Passthrough

    I have the LSI SAS2308... hopefully there is a solution for this card? *pray* Do you mean IT-Mode flash? Thank you!
  2. M

    PCI Passthrough

    Hm... what does "no longer have the rom" mean? Where can i find the right rom and how do i flash it (probably there is a manual for that)?
  3. M

    PCI Passthrough

    Some news on this? I get the same: "Unable to load LSI Corporation MPT BIOS MPT BIOS Fault 02h encountered at adapter PCI(00h,04h,00h) Firmware Fault Code: 2667h" What can i do to solve this problem? Board is: X10SL7 from Supermirco There are some information in this thread...
  4. M

    VGA (PCI-Passthrough) Power Consumption if VM is off

    Hi, if i passthrough a graphic card to a VM and shut down the VM, will the graphic card shut down too (=no power consumption)? Thanks in advance
  5. M

    Proxmox 3.1: Are the NICs Intel i217LM and i210-AT supported by now (Intel Haswell)?

    Re: Proxmox 3.1: Are the NICs Intel i217LM and i210-AT supported by now (Intel Haswel I got it!! The solution is here: http://forum.proxmox.com/threads/9626-no-eth0-anymore-we-moved-proxmox-to-a-new-VM-(WMware-ESXi) THANK YOU VERY MUCH!
  6. M

    Proxmox 3.1: Are the NICs Intel i217LM and i210-AT supported by now (Intel Haswell)?

    Re: Proxmox 3.1: Are the NICs Intel i217LM and i210-AT supported by now (Intel Haswel Hi, here is the screen: So there is no eth0 :/
  7. M

    Proxmox 3.1: Are the NICs Intel i217LM and i210-AT supported by now (Intel Haswell)?

    Re: Proxmox 3.1: Are the NICs Intel i217LM and i210-AT supported by now (Intel Haswel i enabled and disabled it again... Now there is no "bond0" anymore, now it shows "both". But nothing changes It seems that the BMC settings are the master and i don't have a chance to change it via...
  8. M

    Proxmox 3.1: Are the NICs Intel i217LM and i210-AT supported by now (Intel Haswell)?

    Re: Proxmox 3.1: Are the NICs Intel i217LM and i210-AT supported by now (Intel Haswel I dont think it's the router. I now plugged two cables in: one in IPMI one in LAN1 Now i have 3(!) reachable IPs via Ping and over two IPs i can reach the webinterface of the IPMI... What is going on here...
  9. M

    Proxmox 3.1: Are the NICs Intel i217LM and i210-AT supported by now (Intel Haswell)?

    Re: Proxmox 3.1: Are the NICs Intel i217LM and i210-AT supported by now (Intel Haswel I tried, but same problem. Is the IPMI NIC linked to eth0? Because on the Webinterface of the IPMI it shows me the IP of the IPMI Interface for eth0 which i configured in the BIOS. Maybe this is the problem...
  10. M

    Proxmox 3.1: Are the NICs Intel i217LM and i210-AT supported by now (Intel Haswell)?

    Re: Proxmox 3.1: Are the NICs Intel i217LM and i210-AT supported by now (Intel Haswel Hi, thanks for your quick reply! I configured my network card on the old board manually and it worked without problems. I have to following config (i wanna use only eth0 for the first): auto lo iface lo...
  11. M

    Proxmox 3.1: Are the NICs Intel i217LM and i210-AT supported by now (Intel Haswell)?

    Re: Proxmox 3.1: Are the NICs Intel i217LM and i210-AT supported by now (Intel Haswel Hi ckx3009, thanks for your reply! I got the new MB today and i just replaced it with my old one.... Well, proxmox is booting without any problems (except CPU is not supported, but it doesn't matter). My...
  12. M

    Beta packages for Proxmox VE 3.2 - pvetest

    hey, just a short question... are there I210 Intel Gigabit NIC drivers included in this kernel? Thanks!
  13. M

    Proxmox 3.1: Are the NICs Intel i217LM and i210-AT supported by now (Intel Haswell)?

    Re: Proxmox 3.1: Are the NICs Intel i217LM and i210-AT supported by now (Intel Haswel I bought (its still in the USA and i have to wait 2 more weeks :()the incredible new C2750D4i Asrock Motherboard (with new ATOM-CPU). This Board has i210 Gigabit Ethernet too... Will it work without issues...
  14. M

    pveperf: very bad fsyncs/second :(

    thank you! it is enough to create this file with nano and set chmod? i wish you a lot of presents for christmas eve... ;)
  15. M

    pveperf: very bad fsyncs/second :(

    Hell yeah, you are a god, man! your settings are gold! Look: CPU BOGOMIPS: 10376.82 REGEX/SECOND: 1236288 HD SIZE: 19.69 GB (/dev/mapper/pve-root) BUFFERED READS: 391.81 MB/sec AVERAGE SEEK TIME: 0.07 ms FSYNCS/SECOND: 4425.14 DNS EXT: 137.01 ms DNS INT...
  16. M

    pveperf: very bad fsyncs/second :(

    Well, for now i can say that the Samsung SSD is the problem. I've tried a 60GB Kingston SSDNOW (with a standard ext3 proxmox installation) and i have 3935 fsyncs per second on the same port! I can't believe that the Samsung is so bad?!? I thought it is the best SSD on the market?
  17. M

    pveperf: very bad fsyncs/second :(

    So guys... i made a fresh installation with only one SSD (the Samsung 128GB 840 Pro). After the installation i did the pveperf test: CPU BOGOMIPS: 10376.72 REGEX/SECOND: 1216541 HD SIZE: 19.69 GB (/dev/mapper/pve-root) BUFFERED READS: 393.92 MB/sec AVERAGE SEEK TIME...
  18. M

    pveperf: very bad fsyncs/second :(

    yeah thats maybe an option, BUT the performance of the Samsung SSD is not even better with the fsync/second values?

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!