Search results

Verzeihen Sie mir, aber ich verwende Google Translate, um zu antworten. Ich wusste, dass ich einige Probleme mit meinem DL380 G5 hatte, als ich mit dem Einrichten begann. Ich musste den RAID-Controller auf eine neuere Firmware aktualisieren. Ich habe das folgende Service Pack zum Flashen des...

after much more reading and tinkering I think the problem is that I have not properly released the 1060 card from the Proxmox which is why the 710 works no problem. I have followed the available guide but I am still not sure what I am missing.

I finally bit the bullet and installed PMG and set it up so that it was in front of my Zimbra installation. I was able with a PMG mail filter to get it so that all email from domain1.com was sent to email@externaldomain.com and also blocked from reaching the Zimbra server. This would allow me to...

Is this a new installation? Have you configured your subscription key?

When you open the console for that vm what nics are assigned to what function, check the macs to make sure pfsense is testing the wan and lan correctly.

I spent some more time with a test PMG setup and wanted to get some input on how I plan to implement it / solve my 3 questions. 1. If I want to redirect all emails from a particular domain could I not create an inbound rule that would match on any @domain.name and forward that email to a...

Not that I know of. did restarting the cluster services have any effect on the GUI on the third node?

I don't think they would be. This should just restart the services that affect the Proxmox clustering.

I would try a pve-cluster restart via ssh on one of the nodes showing down on the GUI and see if that corrects that issue, let me know if that lets you access VMs on that node from the node that you have GUI access on

are the nodes in the GUI showing green or another status? sounds like the nodes are out of sync as well as a GUI issue. Are the VMs on nodes 1 & 2 accessible?

You should be able to login to any node in the cluster and manage it. When logged into the third node are you able to manipulate any of the VMs, such as see the console, etc?

Have you tried logging into another node in the cluster?

Have you changed the login method from pam to proxmox internal? I am assuming the user is not a user on node but just a user for proxmox? Have you tried logging in as root?

Are you logging in as root or another user created in Proxmox?

What error message are you receiving in the web browser? Have you tried to telnet into the web interface to see if the server is responding on the web interface port? I know you stated you are running critical VMS but PVE 3.x is EOL - I would strongly advise you upgrade to a newer Proxmox...

I still have not figured out question 1, though I am planning to install PMG this week and backing it with hmailserver. I will be shutting off my production Zimbra install while I test. I will start with all emails being received by hmailserver and forwarded to another email address for...

The way that I use proxmox with nfs is this: I have 6 nodes in my cluster and 2 qnap TS451 units. The nas units are setup in raid 6 so their is some fault tolerance. They are also connected to the nodes using 2 bonded gigabit nics. The vm disks are split between the two nas units and I also...

I did try installing the Nvidia drivers and then adding the 1060 back into the VM but still could not get an output. I did not setup VNC or RDP. I must admit I did try and find the syslog but was not sure where to look, I wasn't able to check the event log in the guest with the 16060 attached as...