Search results

Thanks, is here someone in the forum that can report about the stability of v7 or v8 ? Thanks, Frank

Hi there, on the current version of Proxmox PVE 6.3-3 is GlusterFS 5.5-3 used. Taking a view to https://www.gluster.org/release-schedule/ are there any plans for using newver version? Thanks and all the best, Frank

So the RAID card is configured a JBOD and is found by the system. Can also control the tape from node CLI and from inside of the container. waiting now for the new HBA fro replacing the RAID card.

To make it clear again: The LSI 9207 is NOT shown lspci and available. But using an old 3ware radid controller instead of the LSI card, the RAID controller is shown in lspci. So the PCIe and the mainbord is working. Thesting the LSI card in two other system => not found. Conculsion: the card is...

Have test it on 2nd and 3rd mainboard, once booted with CentOS 7, the other with Knoppix. Card not found - but the test raid card was found successful. What happens, when I set the RAID card to JBOD - will it work with the tape drive until I get a new one?

Thanks for your help, here is the lspci output: # lspci 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Root Complex 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Carrizo (rev e2) 00:01.1 Audio device: Advanced Micro...

Hello there, I have insert into my system a SAS 9207-8i HBA and installed then Proxmox 6.3 on a empty node The adapter should be used to connect a LTO-7 tape streamer via SAS. But "lspci" doesn't showes the adapter. For this I'm an absolutely greenhorn. How can I get it working for having...

the replication is set with the */15 cron entry. How can I set a */15 replication but not within 2 and 3 a.m. ?

Thanks Dominic, will ask RedHat about compatibility. On worst case, I do install proxmox on der Gluster nodes and install the same version which Debian buster rolls out at the moment in the repo. So I can be safe for having the same versions connected.

@Dominic: PVE 6.2 uses glusterfs client in version 5.5-3, based on Debian Buster: https://packages.debian.org/buster/glusterfs-server In your post, you're using v7.x https://download.gluster.org/pub/gluster/glusterfs/7/LATEST So the server runs v7.x and the clients v 5.5-3. Can you give some...

Hello there, At the moment, I'm working with PVE 6.2 There are some CTs and VM's which are replicated */15 from the home node to two others. During the nightly backup, I get the the email, that the replication is failed. Yes, there are a lot of disk IO and network traffic during the backup...

Es ist ein HBA mit RAID Funktionalität, welche aber nicht benutzt wird. Die Festplattem sind als JBOD konfiguriert. Lt. Hersteller verhält sich dieser Adpter dann transparent. D.h. sollte die erste Platte im mirror-0 ausfallen, würde das System trotzdem noch booten. Wie verhält sich dann ein...

Thanks a lot good to know - really nice features. Which disks should have the bootloader of the RAID 10 array? Am I right, that it will be the members of mirror-0: sda and sdb? In the case of replacing on of the two disks, I have to install grub on the new one or does it do ZFS automaticly...

Thanks, other than expected the node did booting and starting up normally. But ZFS have now used a non persistent addressing of the disks: NAME STATE READ WRITE CKSUM rpool ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 sda3...

Hello, I have to replace a storage controller of a node. After doing this, I expect that the node will not boot because ZFS with RAID-10 was used. NAME STATE READ WRITE CKSUM rpool...

Hallo zusammen und eine Frage an die ZFS Spezialisten: Wie identifiziert man unter ZFS die Position einer Festplatte? Ich habe das so gelöst: # zpool status -v rpool pool: rpool state: DEGRADED status: One or more devices are faulted in response to persistent errors. Sufficient...

Der Container ließ sich manuell per Migrate auf sämtliche Nodes ohne Probleme verschieben. Der Container nutzt Replikation auf alle Nodes auf welchen er nicht läuft. Wenn man dann den Conatiner in die HA aufnimmt und die Node worauf er gerade läuft herunter fährt, startet HA einen...

3 nodes, Container und VM auf ZFS, diese werden repliziert. Eben habe ich eine Node heruntergefahren, erwartet wurde, dass das HA die Gastsysteme auf die beiden verbliebenen Nodes migriert. Bei einem System hat es funktioniert, beim Anderen kam diese Fehlermeldung: task started by HA resource...

Die Bezeichnung ringnumber stammt noch von Corosync 2 (PVE 5.x) Ab PVE 6 läuft Corosync 3, da lautet die Bezeichnung linknumber. Verwende nun linknumber und das 2. Netz läuft.

wurde vor 4 Stunden bereits gefragt und beantwortet: https://forum.proxmox.com/threads/solved-nicht-mehr-benutztes-disk-image-von-vm-kann-nicht-gel%C3%B6scht-werden.75131/