Search results

EIn Scrub läuft immer jeden zweiten Sonntag im Monat und nicht intelligent nach einam Ausfall. Da hast du nur gerade ziemliches "Glück" gehabt, dass sich das zeitlich überlappt. Ist die Maschine in der Nacht gelaufen? Ansonsten mag es sein, dass der Scan beim starten heute nachgeholt wurde da...

Did you create a user with permissions on the datastore backups? I don't see any in the pvesm command.

I'm curious which feature beside Samba/NFS shares you use. If all I need is to export some paths as NFS/Samba share and want ZFS, doing it bare metal and manually editing the config files where needed is fine in my opinion. PVE for my home server is a mainly Debian based Linux distribution...

I personally just installed Samba directly on the PVE node and set the config file and samba users manually. As you I think that the whole passing through disks to a NAS distribution like FreeNAS is too complicated. The only other way would be to create a normal VM and use that as network...

Is it still configured under Data center -> Storage? Try to remove it there otherwise PVE will look for it and not find it, thus the unknown status

Did you enable the "Thin provision" checkbox for the new storage? If it is not enabled the reservations are set on the ZFS volumes.

address sollte es wohl heißen oder? Also mit doppel d statt nur einem.

If you need the VLANs only for guests and not the node itself you could just create the bond, then use the bond for the bridge. AFAIU VLAN 1 is usually the one you get untagged from your switch. You can define the VLAN used for the guest in the settings of the NIC. If you need to define more...

To avoid that you can configure the storage to not auto create the directory and to mark it as a mountpoint. Not sure though if it can be done via the GUI or needs to be done via the CLI / config file. Best check the docs on storages and what options can be set.

The OOM killer will become active and kill a process, usually a VM as they a good targets with their high RAM usage ;) Though you might have other mechanisms that can free up RAM to some degree. ZFD for example might use quite a bit of RAM for caching but will free it when needed.

You do need to setup a reverse proxy on one machine that will then forward requests to the actual machines. This is usually done depending on the domain. So you can setup multiple (sub) domains and all point to the reverse proxy. There are plenty of guides on how to set up reverse proxies. It...

It does exactly that. Replicate the VMs disk to the other node. You can then enable it to be HA so that if the one node fails, it will be booted on the other. Each node in a cluster has the configurations of all guests so the failover node can take ownership of the guest as long as it has...

dd'ing from /dev/zero with compression on shows how fast your CPU can deliver zeros, compress them and how much metadata around it actually needs to be written to disk ;) If you want to do benchmarking checkout fio which will do benchmarking well and give you better insight into IOPS and...

First, dd ist Not a good tool for benchmarks. Second,using ZFS on a RAID controller is not good practice. ZFS wants the disks as naked as possible and a RAID controller abstracts too much from the physical disks and has its own cache which can interfere. Third, ZFS can be configured in many...

Have you checked if there are firmware updates available for the SSDs? Otherwise, if you can spare one SSD, I would perform some benchmark and write tests on it to see if similar behavior can be observed.

While not perfectly correlated time wise this is still interesting: Apr 10 13:06:33 pve-us smartd[4841]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 194 Temperature_Celsius changed from 99 to 97 Apr 10 13:06:33 pve-us smartd[4841]: Device: /dev/sdb [SAT], SMART Prefailure Attribute...

Nothing in the /var/log/syslog or /var/log/kern.log? How are the drives sda-sdd connected? All on the same controller?

Anything in the sys or kernel logs around the times before you see the drop?

@toddimus while your argument is not a 100% technically correct, it is true in this situation. # ipcalc 10.102.0.0/16 Address: 10.102.0.0 00001010.01100110. 00000000.00000000 Netmask: 255.255.0.0 = 16 11111111.11111111. 00000000.00000000 Wildcard: 0.0.255.255...

Spricht etwas gegen den Proxmox VE installer? Wenn nicht wird es wohl am einfachsten sein, du installierst damit nochmal neu und wählst während der Installation (bei der Dateisystemauswahl) ZFS aus mit RAID1 um den Mirror zu bekommen. Dann sparst du dir dieses herumgetue mit MD RAID? auf ein...