Search results

I guess this can be handle with restriction the VLAN range. bridge-vids 5-15 103 200-205

You can't extend a RaidZx only the pool. This means if you should add another 3 disks (RaidZ1) to this pool. But you can also add a Raid1 to a pool. Yes, but this is the same as a three-way mirror but needs more memory and CPU. Yes, if you add raid1 for two disks or RaidZ1 for min 3-4 disks o...

This is not correct because "disable" can reset when a new package will be installed. You must use "systemd mask" but then the config file will still exist and this is not good.

Hi, do you see any problems in the syslog or dmesg? What do you get with these two commands? ip -c a lspci -tv

Hi, please use the search in combination with Proxmox VE. The answer is the same.

Hi, A.F.I.K. there is no "systemctl remove". But what I know for sure in the systemd version Debian ships there is no remove option.

Hi, do you are sure that you use the installer in UEFI mode? Depend on the Bios setting, and you get the UEFI and Bios Version.

Hi, ZFS is very flexible, so yes, you can slowly create your Raid 10 with ZFS. But there are some limitations. First, Dell uses normally a Raid controller, but ZFS is not compatible with Raids. The recommendation is HBA or the onboard Sata Chip. Second, ZFS is no capacity to rebalance data on...

Hi, In Linux the path for "zfs_txg_timeout" is /sys/module/zfs/parameters/ But be careful if you increase this value. Because in case of a power outage you lose more data.

Hi, can you please send the output of these three files? cat /etc/pve/qemu-server/201.conf cat /etc/hosts cat /etc/resolv.conf

Hi, at the moment there is no Certificate GUI handling. But I guess it will come soon. You have to copy your certificates manual to /etc/proxmox-backup/, there is the file proxy.[key|pem]

Hi, Hängt hauptsächlich davon ab, wo die Monitore sind und wieviele du hast. Die Monitore haben auch ein Quorum wie Corosync. Aber es gibt keine externe Erweiterung für dieses wie bei Corosync (Qnet Dev).

Hi, to help you there are more information needed. ip -c a ip -c -br a pct config <vmid>

Hi, maybe you have MAC filtering enabled on your switch (Phy Network) and your Vm is not allowed to communicate whit this MAc on this port? Or maybe BigIP is not compatible with the used vNIC.

I guess the worth thing is if you have backups of /etc/pve/ you have to reset the Proxmox Cluster FS and start from the beginning. The most important thing is that you have a copy of the /etc/pve. The VM data on the storage is safe. Also, your running VM/CT stays up.

I guess in your setup, only 2 (active-backup) will work. Round Robin is great as long the counterpart (switch) also provides it. The problem with RR is that you can't guarantee that the package comes in the correct order. And some application gets problem with out of order packages.

If there is the possibility for increment sync, it will do increment sync.

Hi, are you Proxmox VE also updated. Because it is important that the Proxmox VE site has also the last updates.

The OVS Methode should work. Default the primary port is the fastest one, but you can use the options to set primary: <protname>.

Hi, this is not supported, and no guarantee is given that this will work. It is correct that you must move the CT/VM config but not to the other node. Let's say this operation is done on Node B: I would recommend you to copy the entire /etc/pve to the user dir. So If you forget something...