Search results

Any updates on this?

I have tried that solution as well.. I did find a fix finally. Once the image is created with vmware converter you need to load the image in vmware workstation or vmware player, I used workstation, once in there the system booted with no issues I removed all the old drivers and rebooted to make...

I know that just pointing out facts about the module.

The Apps are not allowing to define different servers on different nodes. I have tried all support options from hostbill to proxmox no one seems to know how to fix or if they are even trying. For whmcs you have a commercial version for proxmox module. One you pay for all support and software...

The Apps are not allowing to define different servers on different nodes. I have tried all support options from hostbill to proxmox no one seems to know how to fix or if they are even trying. For whmcs you have a commercial version for proxmox module. One you pay for all support and software...

When Stating to use a tool it normally helps to say which tool :cool: I have tried many methods.

Hello Been having a fun time with this p2v to proxmox. I have tried everything in the wiki as well as the forum to get this image to work so far i can only load it in vmware workstation with no issues. But when i try to load it in proxmox latest version it give me the drivers issue for the...

VM Proxmox 2.2 with qcow2 hdparm -Tt /dev/vda /dev/vda: Timing cached reads: 5914 MB in 2.00 seconds = 2959.22 MB/sec Timing buffered disk reads: 702 MB in 3.11 seconds = 225.43 MB/sec [root@dev includes]# hdparm -Tt /dev/vda /dev/vda: Timing cached reads: 5714 MB in 2.00 seconds...

This is with virtio for the drive kvm: 15001: cpu0 unhandled rdmsr: 0x345 kvm: 15001: cpu0 unhandled wrmsr: 0x40 data 0 kvm: 15001: cpu0 unhandled wrmsr: 0x60 data 0 kvm: 15001: cpu0 unhandled wrmsr: 0x41 data 0 kvm: 15001: cpu0 unhandled wrmsr: 0x61 data 0 kvm: 15001: cpu0 unhandled wrmsr...

These are the new results for the test same hardware just running virtio for the drive instead of ide Host-01 Serial No: 10/22/12 /dev/dm-2: Hours: SMART Errors: 0 Reallocated / Pending : / Read Speed: 352 MB/s hdparm -Tt /dev/dm-2 /dev/dm-2: Timing cached reads: 14832 MB in 2.00...

This vm 100.conf file. boot: cdn bootdisk: ide0 cores: 2 cpu: core2duo ide0: local:100/vm-100-disk-1.raw ide2: local:iso/CentOS-6.0-x86_64-bin-DVD1.iso,media=cdrom,size=4139454K memory: 4096 name: Virtualmin net0: virtio=52:A2:E5:C4:0C:FD,bridge=vmbr0 ostype: l26 sockets: 1 2 ways i came to...

I am having the same error with these nics Ethernet controller: Intel Corporation 82574L Gigabit Network Connection kvm: 1822: cpu0 unhandled rdmsr: 0x345 kvm: 1822: cpu0 unhandled wrmsr: 0x40 data 0 kvm: 1822: cpu0 unhandled wrmsr: 0x60 data 0 kvm: 1822: cpu0 unhandled wrmsr: 0x41 data 0 kvm...

Host node 01 10/21/12 /dev/sda: Hours: SMART Errors: 0 Reallocated / Pending : / Read Speed: 402 MB/s linux vm same node Serial No: QM00001 10/21/12 /dev/sda: Hours: 1 SMART Errors: 0 Reallocated / Pending : 0 / Read Speed: 207 MB/s Half the speed and this is a Raw image Their is a...

The ability to make a ip pool so it can auto assign ips The ability to have/use/assign ipv6 addresses in the gui interface. Thanks

Hello Dave Let me know when you want me to take a look at your system i'm here till 7pm est then again tomorrow all day from 12 to 7pm est. Thanks Tom

Hello Dave, I have been very busy of late, How about we get something setup for this weekend Thank Tom

I msg you back check your inbox =D 1. Access the Command prompt as administrator then From the command prompt on the problem server, run: C:\>set devmgr_show_nonpresent_devices=1 C:\>start devmgmt.msc 2. Then, select View from the drop down and select to Show Hidden Devices.

What timezone are you locate in? Aol instant message drag00n1111 I would like to know all the spec of the system,hardware,OS I will Help with as much as possible and show you what i can. Tom

Its always a good thing to removed any and all old drivers from the system either before or after the conversion. I know that you will have a lot of ghost hardware after the conversion that you will have to remove.

I Have used those systems before with vmware converter,PM me if you want me to take a look we can talk about what needs to be done.