Search results

Hi, Can you check if the IOMMU is enabled in BIOS and that Proxmox VE boot option include `intel_iommu=on` or `amd_iommu=on`?

Hi, Can you please provide more syslog entries?

Can you please check the storage status and the output of the following commands: pvesm status --storage <CIFS storage> top free -h For more information can you please check the syslog using journalctl since you re-enabled the CIFS share? You can generate the syslog as the following command...

Hi, If your current PCI passthrough setup via CLI is working fine, there's no strict need to change it.

Make sure that you restart the pvestatd on the two remaining nodes.

You can move/remove the `/var/run/pvestatd.pid.lock` and then restart the pvestatd service using systemctl restart pvestatd command.

Hi, Can you please try to manual mount your CIIFS on a test VM or LXC or even your Proxmox VE using `mount`, to narrow down if the issure related to the CIFS connection or not. Did you check the syslog for anything related to?

Hi, Can you still ping the NFS share server? If you disabled the NFS storage in the Proxmox VE -> Storage do you still see the grey question mark?

Hi, Can you please share the network configuration of your Proxmox VE server `cat /etc/network/interfaces`?

hast du den folgenden Befehl schon ausgeführt? ssh-keygen -f "/etc/ssh/ssh_known_hosts" -R "192.168.0.10" hast du im Syslog etwas Interessantes gesehen?

Hi, Can you try to get rid of the `blacklist i915` from the blacklist.conf, since the iGPU passthrough to work, the VM needs to load the i915 driver inside the VM.

Hi, Can you please share the output of `apt-key list` command?

You can check the date when the system hangs and before a bit

Yes

Hi, You don't need STP with LACP on a single switch, but if you plan to expand with more switches, enabling it might help avoid loops. I don't know if your switch support MLAG without stacking.

Hi, have you checked that your SSD is still being detected in the BIOS/UEFI settings? if yes, you may need to change the boot priority to your SSD. If that didn't help, have you tried to boot from Linux USB and check the disk partiion using fdisk -l or lsblk?

Hi, I would wait the scrub to finish since it is about 50% done with an estimated 4+ hours remaining. during this process, ZFS maybe is checking for and attempting to repair any issues. In that time you can check the dmesg or journalctl for anything interesting.

Hi, Can you please provide us more information about the issue? what the error you get?

The total RAM you have is `28Gi` as shown in the output you've provided

Hi, What is the output of `free -h`?