Search results

How you set up the proxmox host networks will depend on your network topology. Do you have vlans in use already? Will the proxmox host be behind a physical edge firewall and/or ISP router/firewall? Will the proxmox host have a Firewall/router VM/lxc guest and how would you like that to fit into...

Typically significantly easier to just use Linux Bridges and not do pass through as pfsense suggested.

Just to confirm, does the modem need the wan traffic Tagged100 or is this your design? not saying anything wrong with that design. What isp modem are you using, pfsense has issues with some. Have you restarted the modem and tried to allow pfsense to get a DHCP address, some won't respond to a...

So looks like things are setup appropriately from the 5G modem -> passthrough USB-> to OpenWRT->vmbr1->pfSense->vmbr2(lan) right now the pfSense lan (vmbr2) is not physically or virtually connected to anything else from what I can tell. 1.what Is the pfSense lan gateway address? 2. What is the...

Thank you. Lots of things going on here and still trying to conceptually unravel what you have connected to what and how. Answer 1 you say enp1s0 is connected to pfsense box? Confusing is this the pfsense vm or another separate pfsense box? You never answered specifically what box/device holds...

Couple things, the default Proxmox Linux bridge excludes the use of vlan1 tagged. Would need to change the line bridge-vids 2-4094 to bridge-vids 1-4094, but I don’t think that is neccessary. Vlan1 is untagged on switch port 8 meaning untagged traffic coming in from proxmox, pfSense or VM’s...

Let's try this again: 1. what is enp1s0 connected to? similar question, what is the 192.168.100.2 gateway connected to vmbr0? is this gateway the isp router/modem and does it do DHCP? 2. take screen shots of the network connections from the proxmox gui of OpenWRT vm and the pfSense VM. Trying to...

OPenWRT uses iface enx000ec6ca3c39 for wan then? What Linux bridges does OpenWRT use? for Wan and for Lan? Does or will anything else connect to OpenWRT besides pfsense?

No, sorry you misunderstood my suggestion. Recreate the vmbr1, but this time select enp6s0 as the Bridge Port within vmbr1 bridge. then try and use vmbr1 as the pfsense LAN again. next see if devices plugged into enp6s0 get a DHCP from pfsene or can ping the pfsense gateway. from the very first...

Something is wrong with the enp5s0 nic. It is not even listed with ip a. May be broken. Switch the bridge port on vmbr1 to enp6s0, and plug into that nic at least as a test. then I would suspect things work as expected with anything physically plugged in there. Are enp5s0 and enp6s0 from the...

What does ip a show? Have you tried switching vmbr1 to eno6s0?

So have you tried giving the proxmox2 node an IP/CIDR on vmbr1 using an IP from the pfsense lan subnet? Something like 192.168.100.2 since that is outside your pfsense lan DHCP pool. Leave the vmbr1 gateway unfilled for now, but eventually, you may want to switch that over from vmbr0 (current...

I don't know the answer to this one as I do not use these. Do you plan on frequently unplugging and plugging back in this device? Hopefully someone or just trial and error answers this for you. If VLANs are new territory to you and you do not have a VLAN-capable switch already then, forget this...

https://forum.proxmox.com/threads/lacp-bond-wihout-speed-increase.54955/

The USB nic will work as explained. Give it a try, if flaky then you can later just use a separate management vlan over the bonded 2.5g nics and that should not even be noticeable to any other traffic over that bond.

Expected behavior. Reinstalling ifupdown2 will not stop the addition of +auto eno1 but for many those additions no longer caused a problem. Does your networking still fail upon reboot with the auto iface lines added?

Did you try to reinstall ifup2down as suggested in the other thread you responded in? Post in thread 'Upgrade to Proxmox 7 - Bond (LACP) Interface not working anymore' https://forum.proxmox.com/threads/u...terface-not-working-anymore.92060/post-472796

Did you try to reinstall ifup2down as suggested in the other thread you responded in? Post in thread 'Upgrade to Proxmox 7 - Bond (LACP) Interface not working anymore' https://forum.proxmox.com/threads/upgrade-to-proxmox-7-bond-lacp-interface-not-working-anymore.92060/post-472796

why not just run adguard in a separate LXC and get some separation from the host? easy to set up. Check under ad blocker. https://github.com/tteck/Proxmox

Not sure. Could be several things a bad card, bad PCI slot on MB, the card firmware and/or the MB Bios need updating, the current proxmox kernel does not have working drivers for this card. you could experiment and try the newer kernel below to see if that gets things working as expected...