Search results

I should have the right version. root@pulsar:~# cat /proc/cpuinfo | grep microcode microcode : 0x24000024 microcode : 0x24000024 microcode : 0x24000024 microcode : 0x24000024 I am on that BIOS version as well, but I had installed the microcode manually before. I'm on...

Am I the only one still having issues? My Docker Debian 11 VM still freezes every about 2 weeks, and sometimes even my HomeAssistant VM freezes. Tried to update microcode, updated bios, updated kernel... still issues. The processor is a Celeron N5105 on a Intel NUC Essentials NUC11ATKC4. I'm...

Unfortunately it looks like yesterday my Debian 11 Docker VM froze again after almost a month even though I have the newest microcode... :(

This looks different though. We usually have crashes/freezes of VMs, not the host.

I have the same microcode version, without commenting out the modprobe blacklist. Unfortunately it still crashes about every two weeks (kernel 5.19)

Kernel 5.19, intel_idle.max_cstate=1 processor.max_cstate=1 mitigations=off and governor in powersave mode still froze my docker VM. I'm kinda pissed for this, how could they advertise Virtualization features on a Hardware that clearly cannot work reliably even for a few days? I've setup...

Only once, has been running OK since that happened but who knows. I set the governor to powersave but did not touch cstates yet as I need to reboot. The thing that bothers me is that it has always only happened to the same VM even though I have many more, even with the same OS.

Same issue here, had VMs crashing almost daily on a fresh Proxmox installation and they had been running for almost a month after updating to kernel 5.19 and microcode. This night a VM crashed again (always the same one, Debian 11 with Docker)... I'll be trying the C-State fix. Intel NUC with...

Seems like the onboard controller in HBA mode does not behave exactly like a HBA card. I just bought a HP H220 and the problem is gone

Hi everyone, this is my first post here. I'm running Proxmox on my homelab (a HP P360p Gen8) and I'm having issues reading SMART values from my drives. The drives are connected to the onboard RAID controller that I set to HBA mode because otherwise I could not have had more than one disk...