Search results

Thanks for your response! Thanks for your time!

Hi guys, I am not sure how High Availability and Fencing works exactly in proxmox so I am hoping someone with more experience than me can shed some light on this for me. I have 5 Dell servers with iDrac 6 Express which also support IPMI, so using either one of those 2 methods I can setup...

Quick follow up note. I got my hosts installed with the structure I wanted, bud had to do it twice as one of the commands did not work as expected. DID NOT WORK: linux ext4 maxroot=10 swapsize=16 minfree=12 What WORKED instead is: linux ext4 maxroot=10 swapsize=16 hdsize=100 Since my SSD gave...

Thanks for the quick response. Much appreciated. I will give this a go... the only other thing, I will do some doc reading as far as what the recommended journal size is for my setup (for ceph cluster) and I assume there should be no issue with leaving that available instead of using the...

Hi guys, Need the more seasoned Proxmox users to advise please. I am setting up a new cluster that I would like to go live with in the next couple weeks. Setup is as following: 5 Servers, all identical, each host has 32GB RAM sda: 120GB SSD read optimized sdb: 1TB WD Red NAS Edition My...

You are the man! thanks so much for that suggestion, here's the solution if anyone else runs in to it. For the record my ceph cluster is firefly release. On Proxmox Hosts (2.3) wget -q -O- 'https://ceph.com/git/?p=ceph.git;a=blob_plain;f=keys/release.asc' | apt-key add - add: deb...

rbd map -m 192.168.1.31 --pool pave_data pve_data_rbd --id admin --keyring /etc/pve/priv/ceph/ceph_storage.keyring 2014-05-14 10:53:27.765576 7f8777b56760 -1 did not load config file, using default settings. rbd: /sys/bus/rbd/add does not exist! Did you run 'modprobe rbd' or is your rbd module...

I should mention, it's Proxmox 2.3 and yes my admin key is name ceph_storage.keyring, I shouldn't have used the sample. I apologize.

Hi there, I have configured a 3 node ceph cluster, and setup a pool caled pve_data (as per proxmox wiki on this topic). I have copied the ceph.client.admin.keyring /etc/pve/priv/ceph/storage_id.keyring I added the storage in the GUI with the ips of the 3 monitors such as...

Does it make sense for me to bond to eth0 only then? I'm only needing on device in my case, I don't need failover or load-balance in my case (even if i did, on host 1 I couldn't achive this as I only have 2 nics and 1 is for wan 1 for lan).

I did a tcpdump on pfsense VM while pinging it from host 2 via ping -I vmbr10 10.10.0.1 tcpdump was showing the ICMP echo request arriving on pfsense, it looks like the reply gets lost on the way back.

Hi mir, Your bond0 is just a bond to eth0? or more than one eth devices?

Hi Udo, Thanks for your response. Because of my inexperience with vlan I might have misled you guy to think that I am tagging the vlan traffic, in fact I am not. After doing some reading on the forums, google, etc I learned that I can vlan my virtual infrastructure using bridges that bridge...

Hi guys, I should start by saying that I have not had the pleasure of configuring vlans in the past, but recently am needing to, so I am hoping some of you good people with vlan experience can help me out a little. It will be greatly appreciated! I am going to attach a PNG file with my current...