Search results

OK, reinstalled to a software ZFS RAID0 instead. So far, system all good. Can login and browse web interface. Interestingly, execution of > dmesg | grep eth1 | head -3 reports: forcedeth 0000:00:09.0: if name eth1 PHY OUI .. MAC address here ... device eth1 entered promiscuous mode...

Interestingly, it seemed one problem was I'd input the wrong MAC address in my DHCP Reserved IP list! So having fixed that I was indeed able to use the NVIDIA network card. However, having executed your suggested syntax (dmesg | grep eth1 | head -3) (changing to eht1 which is my connection) it...

I didn't try SSH, and I still haven't got to the stage of creating VMs\Containers. The installation and just setting it up keeps thwarting me. So I'm afraid I don't know. Since then I tried re-installing, again, this time to a newly configured hardware RAID0 (so /dev/sda). After installation...

Hi Have installed PM 4.4 on a dedicated machine. After some initial connection problems (in my first post) I thought all was well, however, I seem to have another issue which may be my fault or maybe not. Basically, I power on the hypervisor machine and can then connect to the web interface...

After adding the second card (eth0 and eth1 are the Nvidia onboard cards) I had to edit the /etc/networking/interfaces file and changed 'eth0' to 'eth2' using vi, and now it works.

Just tried fitting a spare dedicated Broadcom ethernet card and same result after re-installation. Nothing can access it and it cannot access anything. But it can't be anything to do with my router etc because then live CD boots of other Linux distros would not be able to connect either.

Hi Have installed Proxmox 4.4. Installation went fine though during installation I was not connected to my network. The machine was just stood alone at that point, but I knew I'd be able to configure my router later on and allocate the chosen IP of 192.168.0.30 and the MAC address to the DHCP...