Search results

Ok, I have now tried the config and getting more confused. I have the same config on both nodes: allow-vmbr0 pve0mngmnt iface pve0mngmnt inet static address 10.0.0.9 netmask 255.255.255.0 gateway 10.0.0.1 ovs_type OVSIntPort ovs_bridge vmbr0 auto lo...

Ok, thanks for the reply! Should I assign an IP to the vmbr0 like 10.0.0.7 and also a gateway?? For the proxmox mngment ovs port, should I assign 10.0.0.9 (the current mngmnt IP) and no gateway??

Hello, I need help with whitch configuration I should use with an OVS on proxmox. I have two nodes with two nic:s eatch. I want the nic:s in a LACP bond and the bridged to vmbr0 I have understodd that it is best practice to use vlan:s so proxmox mngmnt vlan 50 I have a 8 port netgear switch...

Yes, I have managed switches, a bond is connecting the two other nodes to a managed switch and I also want the A1SRi to go in to that switch. I have a working config for a bond on Proxmox but should i Create the bond on the host or on the VM?? And, I have read some about running zentyal or some...

Got an answer about odd numbers on cores:s It was about ESXi and it doesn't matter if there are odd numbers assigned. Another question, what would be best practice when it comes to assigning NIC:s to pfsense? Should I just create bridges (vmbr0 etc) or should I just do a passthrough of the...

Ok, I have used pfsense virtualized before when i only had two servers and it worked quite well. Now that i have the A1SRi the question is if it will be able to handle the load? And, what is best practice, can i assign three core:s to the KVM without issues? Always assign an even number or one...

Hello, I bought the Supermicro A1SRi ( https://www.supermicro.com/products/motherboard/atom/x10/a1sri-2558f.cfm ) and running pfsense as a router, works great. It has 4 Atom cores 2.4 ghz I also have two E3-1231v2 on supermicro boards with Proxmox in a cluster. To what I have come to understand...

I mean that I had to restart the node that my containers are on, I have two nodes in a cluster. And after restart of "node2" the share was available on the containers.

Thanks for the reply, I didn't realize I had to restart the whole node to load the config, now it's working:-) And for the future, is there a command that lets you reload the config without restarting the node?? Restarted the container several times and that didnt help.

Thanks for the help:-) I tried your suggestion but had no luck, I also found a similar line, lxc.mount.entry = /home/krnekhelesh/Documents/Ubuntu-Projects home/ubuntu none bind,create=dir But it dident work... The mountpoint on the host i'm trying to mount in the container is...

Ok, then how should I mount the sambashare that are shared directly from my node to the VM:s?? Are there any special container images I should use or what??

Hi, I have in Proxmox 3.4 used a bind script to mount samba shares that are shared from the host "proxmox2.local" to Containers on that host and it has worked great! But now, after installing Proxmox 4.0 I cant see anything under "/etc/vz/" except for one file called config?? Where are conf...

Issue resolved, reinstalled and used standard settings for bond from Proxmox site and now it works:-)

Hi, a bit new on Proxmox so be nice;-) I have set up two nodes with exactly the same hardware and I can get to the managment GUI and all But, the nodes cant get to the internet?? I have created a bond that look like this: auto lo iface lo inet loopback iface eth0 inet manual iface eth1...