Search results for query: failed to set iommu for container: Operation not permitted

...vfio 0000:04:00.0: failed to setup container for group 16: Failed to set iommu for container: Operation not permitted Instructions for PCI Passthrough of HBA Controller on Proxmox 8.4.0 (Dell R710)(Latest Bios at time of post) Phase 1: BIOS/Firmware Configuration Reboot your Dell R710...

Came here to say this is same problem I am having, well maybe jut a little different, but I have done everything you have root@pve:~# dmesg |grep gasket [ 5.839863] gasket: module verification failed: signature and/or required key missing - tainting kernel root@pve:~# uname -r 6.8.12-3-pve...

Hi everyone, Joining the common frustration here heh I'm new to Proxmox I've have a m.2 coral dual TPU with the PCIE card from magic_smoke to make both TPUs accessible I've been converting over to Proxmox after having one TPU working in frigate with 7 cameras for half a year I think I'm...

...not working. when i start the vm gives me this "kvm: -device vfio-pci,host=0000:04:00.1,id=hostpci0.1,bus=ich9-pcie-port-1,addr=0x0.1: vfio 0000:04:00.1: failed to setup container for group 13: Failed to set iommu for container: Operation not permitted" anyone can help me ?? the gpu is a 1060.

...vfio 0000:06:00.0: failed to setup container for group 33: Failed to set iommu for container: Operation not permitted TASK ERROR: start failed: QEMU exited with code 1 I've done some searching and I found this thread that's not directly related to a Graphics card problem and is running close...

...vfio 0000:0b:00.0: failed to setup container for group 58: Failed to set iommu for container: Operation not permitted TASK ERROR: start failed: QEMU exited with code 1 only thing i did was enable intel_iommu=on in the grub config and updated the bootloader in the bios all vt and srv-io its...

...Download kvm: -device vfio-pci,host=0000:03:00.0,id=hostpci1,bus=pci.0,addr=0x11: vfio 0000:03:00.0: failed to setup container for group 29: Failed to set iommu for container: Operation not permitted TASK ERROR: start failed: QEMU exited with code 1 PCI Pass through: What can i do to fix...

...vfio 0000:04:00.0: failed to setup container for group 28: Failed to set iommu for container: Operation not permitted TASK ERROR: start failed: QEMU exited with code 1 I'll try rolling out a fresh VM from scratch before I panic, but if I can reconfigure that VM it'd be nice, as I had a few...

...vfio 0000:02:00.3: failed to setup container for group 54: Failed to set iommu for container: Operation not permitted TASK ERROR: start failed: QEMU exited with code 1 But I also get this, so I assume it is working; dmesg | grep IOMMU [ 0.000000] DMAR: IOMMU enabled [ 0.000000]...

...vfio 0000:0d:00.0: failed to setup container for group 30: Failed to set iommu for container: Operation not permitted TASK ERROR: start failed: QEMU exited with code 1 Im Verlaufe der Anleitung soll ich überprüfen ob IOMMU-Interrupt aktiviert ist. root@pve01:~# dmesg | grep 'remapping' [...

...vfio 0000:03:00.0: failed to setup container for group 17: Failed to set iommu for container: Operation not permitted TASK ERROR: start failed: QEMU exited with code 1 of course I did all the steps: nano /etc/default/grub GRUB_CMDLINE_LINUX_DEFAULT="quiet intel_iommu=on" update-grub nano...

...vfio 0000:05:00.0: failed to setup container for group 17: Failed to set iommu for container: Operation not permitted TASK ERROR: start failed: QEMU exited with code 1 i do see that ios has interupt remapping enabled but it gets disabled. I used the script in the wiki to allow unsafe...

...get trying to pass through a HBA kvm: -device vfio-pci,host=0000:0b:00.0,id=hostpci0,bus=ich9-pcie-port-1,addr=0x0: vfio 0000:0b:00.0: failed to setup container for group 30: Failed to set iommu for container: Operation not permitted TASK ERROR: start failed: QEMU exited with code 1...

...get trying to pass through a HBA kvm: -device vfio-pci,host=0000:0b:00.0,id=hostpci0,bus=ich9-pcie-port-1,addr=0x0: vfio 0000:0b:00.0: failed to setup container for group 30: Failed to set iommu for container: Operation not permitted TASK ERROR: start failed: QEMU exited with code 1...

Failed to set iommu for container: Operation not permitted is often an indication that you run into a RMRR issue typically on a HP machine. Check the system log for messages about RMRR. If so, then this site might help and you can find possible work-arounds there and by searching the forum.

...the VM but I get the following error message: kvm: -device vfio-pci,host=0000:03:00.0,id=hostpci0,bus=ich9-pcie-port-1,addr=0x0: vfio 0000:03:00.0: failed to setup container for group 43: Failed to set iommu for container: Operation not permitted TASK ERROR: start failed: QEMU exited with code 1

...vfio 0000:07:00.0: failed to set up container for group 1: Failed to set iommu for container: Operation not permitted TASK ERROR: start failed: QEMU exited with code 1 Additionally, in the dmesg output, I see the following message: vfio-pci 0000:07:00.0: DMAR: Device is ineligible for IOMMU...

Sounds like the RMRR problem. I have no experience with that but maybe this can provide a work-around? Looks like you selected hardware that does not work well with passthrough.

Just read this: https://forum.proxmox.com/threads/hpe-ml-dl-server-series-pci-gpu-passthrough-pve8.131361/ HPE IOMMU/passthrough is not enabled, its need to enable per PCI-E slot using the "conrep" util from HPE, after you enabled on the specific PCI-E slot, there will be no more error.

...vm, and got this message: kvm: -device vfio-pci,host=0000:02:00.0,id=hostpci0,bus=ich9-pcie-port-1,addr=0x0: vfio 0000:02:00.0: failed to setup container for group 49: Failed to set iommu for container: Operation not permitted TASK ERROR: start failed: QEMU exited with code 1 So what to do now?