Search results for query: HP RMRR

For anyone who comes along and has a similar issue: I had to remove the "nomodeset" from /etc/kernel/cmdline Then i915 finally was visible to my host when it started up

Just to add: dmesg | grep -e DMAR -e IOMMU [ 0.007135] ACPI: DMAR 0x000000007F4989F0 0000A8 (v01 INTEL EDK2 00000002 01000013) [ 0.007155] ACPI: Reserving DMAR table memory at [mem 0x7f4989f0-0x7f498a97] [ 0.074014] DMAR: IOMMU enabled [ 0.200108] DMAR: Host address width...

SOLUTION: VM config: - System -> Machine : q35 - System -> BIOS: OVMF (UEFi) - System -> Pre-Enroll keys: UN-ticked (!) PCIe Pass-through: - VM -> Hardware -> PCI Device -> Raw Device -> Select one of the ID, then tick "All Functions" and tick "PCI-Express" //OR - Datacenter -> Resource Mappings...

Hi all, I'm at my wit's end here. I’m running Proxmox 9 and trying to get my Intel iGPU working for hardware acceleration (VAAPI / Quick Sync). I’ve already enabled IOMMU with intel_iommu=on iommu=pt in systemd (I am using ZFS), and I can see /dev/dri/card0, but I do not get /dev/dri/renderD128...

Thanks I can remove it. So even with kernel 6.14, I have to modify /proc/cmdline even if I already edit grub as below: root@pve:/mnt/diskint# cat /etc/default/grub # If you change this file or any /etc/default/grub.d/*.cfg file, # run 'update-grub' afterwards to update /boot/grub/grub.cfg. #...

Hello, I'm trying to passthrough an Intel iGPU so i can use one VM as a display for some NVR i'm running... here is what i have done so far: Changed /etc/default/grub to include: GRUB_CMDLINE_LINUX_DEFAULT="quiet intel_iommu=on iommu=pt" update-grub was run after this change Under...

I reset all my bios and did once again a fresh install of proxmox 9.0.3. I tried to progress step by step. I've just made that change: #/etc/default/grub GRUB_CMDLINE_LINUX_DEFAULT="quiet intel_iommu=on" Then updade-grub Then reboot proxmox. Then: root@pve:~# dmesg | grep -e DMAR -e IOMMU...

Hello. I am trying to make my GPU passthrough working, no chance so far. It worked well with Proxmo 7.4 root@pve:~# dmesg | grep -e DMAR -e IOMMU [ 0.024502] ACPI: DMAR 0x0000000099772000 000050 (v02 INTEL EDK2 00000002 01000013) [ 0.024546] ACPI: Reserving DMAR table memory at...

My PVE host has 2 NV cards and 1 onboard Intel. I've followed many guides on setting up my PVE host and I believe I've got those steps completed. However, after creating a VM and manually adding 1 of the NV devices to the VM, rebooting, lspci will not show a NV device. Should I just undo...

IDK. My VM starts but no video output. why isnt that iommu enabled? no bios screen for me its a mac pro 5,1. === [BIOS/UEFI] Boot Mode Check === BootCurrent: 0004 BootOrder: 0004,0003,0002,0000,0001,0080 Boot0000* Linux Boot Manager...

My problem is not that the host doesn't see the drives, the problem is the VM that sees the SATA Controller but can't mount the drives. And on the host I get this errors when the VM tries: root@pve-beast:~# dmesg | grep -i dmar [ 0.008271] ACPI: DMAR 0x00000000D996B1F0 0000B8 (v01 INTEL...

So after some more digging i stumbled over the following when running "dmesg | grep -e DMAR -e IOMMU~" root@pam:~# dmesg | grep -e DMAR -e IOMMU~ [ 0.007398] ACPI: DMAR 0x000000007DFD2000 000090 (v01 DELL PE_SC3 00000002 DELL 00000001) [ 0.007414] ACPI: Reserving DMAR table memory at...

I'm having an interesting issue related to PCI passthrough after I did the upgrade to 9.0. The one VM that I'm using with PCI passthrough will not boot, and seems to fail before even getting to the BIOS. I try to open the console to see what's going on and see pvestatd[1633]: VM 103 qmp command...

I figured that I would share my deployment notes/guide for how to passthrough mediated devices (e.g. Intel iGPU (I'm using a 6700K, so it theory, it should work for anything 6th to 11th generation. For 12th to 14th generation, which uses the Intel Iris Xe graphics rather than (U)HD <<number>>...

Hello, I'm having a problem with GPU passthrough in my VM. Any help would be appreciated. I was able to get passthrough working on an LXC as an alternative, but the fact that it doesn't work on a VM is giving me a headache. When I try to start the VM, it always gives the same error: error...

Hi, I have been able to use a tiny11 23h2 ISO image from this link https://archive.org/details/tiny11-2311 and create a vm. As next steps I am trying to passthrough my rtx 3070ti graphics card to the vm. I have been unsuccessful so far and I have tried to follow through several YouTube videos...

I tried to rule out some more stuff by creating a new VM, this time with a different system type "i440fx" instead of "q35". When I pass through a PCI device on this machine it shows the same behaviour, hanging on startup. Checking the PCI(e) Passthrough Guide again I have all the right things...

Found the bios was way out of date so updated that. Looks to have resolved some issues. But aplay -l on the container gives "no soundcards found" root@proxmox1:~# dmesg | grep -e DMAR -e IOMMU [ 0.007447] ACPI: DMAR 0x00000000DB725870 0000C8 (v01 INTEL SKL 00000001 INTL 00000001) [...

virtualization is on in the bios. On the host: root@proxmox1:~# dmesg | grep -e DMAR -e IOMMU [ 0.007156] ACPI: DMAR 0x000000009F42C380 0000A8 (v01 INTEL SKL 00000001 INTL 00000001) [ 0.007176] ACPI: Reserving DMAR table memory at [mem 0x9f42c380-0x9f42c427] [ 0.094085] DMAR...

Moin, ich bin etwas am Verzweifeln bei dem Versuch einer VM den physischen HDMI Port meines ASUS PN42 mit N100 CPU durchzureichen. Frische PVE 8.4 Installation, VM erstellt, die PCIe Devices durchgereicht. HDMI Bild hat sofort funktioniert, nur als Audio Device habe ich nur Frontpanel Audio in...