Search results for query: nvidia-smi

Also, make sure you can run nvidia-smi in the container.

Can you post the config of the LXC?

@dasunsrule32 I tried your method on a new unpriviledged lxc (debian 13). I deployed it with the docker lxc helper script. I can get nvidia-smi to work inside the container. However, I'm having problems with docker. Trying to run ollama, and getting this error: I've checked the devices inside...

This is a great write up pretty much what I did. just a note the NVIDIA driver comes with the persistence scrip you just need to install it you can find it here /usr/share/doc/NVIDIA_GLX-1.0/samples/nvidia-persistenced-init.tar.bz2

Please check that the GPU driver is loaded via lspci -vnnk | awk '/VGA/{print $0}' RS= | grep -Pi --color "^|(?<=Kernel driver in use: |Kernel modules: )[^ ]+" Also check what nvidia-smi says. What does pct start CTIDHERE --debug say?

I setup and followed instruction on google also here but all is failed. My server is Gigabyte R282-z93, Dual EPYC 7642, RAM 256GB and GPU RTX5000 ADA. Proxmox 9 (initrd=\EFI\proxmox\6.14.11-2-pve\initrd.img-6.14.11-2-pve root=ZFS=rpool/ROOT/pve-1 boot=zfs amd_iommu=on iommu=pt video=efifb:off...

...echo "" > /sys/bus/pci/devices/0000:02:00.1/driver_override - After installation, both GPUs should be visible to the host again under ```nvidia-smi``` --- ## **Step 2 — Install NVIDIA Driver** 1. Make installer executable (this can be downloaded from Nvidia page): chmod +x...

...can see it: For my gtx 1060 - For my Quadro P400 - After installation, both GPUs should be visible to the host again under ```nvidia-smi``` --- ## **Step 2 — Install NVIDIA Driver** 1. Make installer executable (this can be downloaded from Nvidia page): 2. Run installer: -...

...but everything works fine as before as T4-8Q on a Win10 machine on which I successfully updated the guest drivers as well. I also have a P40 but I use it on a direct passthrough to a Linux VM, so it's not shown on nvidia-smi output. Lmk if you want me to investigate more on that card as well.

...passing the GPU’s ROM), but nothing works. Inside the VM, I always end up with this: marcosms@pi-hole:~/descargas/nvidia-patch-master$ nvidia-smi No devices were found marcosms@pi-hole:~/descargas/nvidia-patch-master$ sudo dmesg | grep -i nvidia [ 3.743446] nvidia: loading out-of-tree...

...with oculink. It detects all three GPU. But when launching a VM after restarting the physical server, only two show up on the VM under nvidia-smi. I have to manually remove the PCI devices and re-add them (sometimes several times, with several reboots of the VM) before they are all detected...

...00000000-0000-0000-0000-000000000302 TASK ERROR: start failed: QEMU exited with code 1 I get proper returns when running mdevctl types nvidia-smi and nvidia-smi vgpu, so it appears that the 16.9 driver (535.230.02) installed correctly on the host. Mdev Type: nvidia-47 Available...

...a repo associated with the patching of the grid driver, it details the steps fairly well gridd-unlock-patcher if you follow that repo and the license repo instructions it should work, then just run nvidia-smi -q | grep "License" as listed in the license repo instructions to check it to make...

yeah it's a simple as it sounds. install the grid driver which includes the nvidia-gridd binary and patch it. you'll need to have the licensing server running so you can download your certificate from it. the repo for the patching utility includes instructions from memory. I normally use the...

...vgpu_ulock-rs. All the installation went smoothly without problem. I am able to see expected outputs for the following commands: nvidia-smi mdevctl types and nvidia-smi vgpu I have also set up a new version of the license server. Though not tested it yet because of the reason below. I...

...usr/lib/x86_64-linux-gnu/libnvidia-ptxjitcompiler.so.1 none bind,optional,create=file When I run nvidia-smi inside the LXC, it reports that the command is not found. When I try to install the NVIDIA drivers directly in the LXC with apt, it fails with unable to make backup link of... Invalid...

...5.5.0-2 qemu-server: 8.4.1 smartmontools: 7.3-pve1 spiceterm: 3.3.0 swtpm: 0.8.0+pve1 vncterm: 1.8.0 zfsutils-linux: 2.2.8-pve1 Output of nvidia-smi vgpu -s GPU 00000000:41:00.0 NVIDIA RTXA6000-1B NVIDIA RTXA6000-2B NVIDIA RTXA6000-1Q NVIDIA RTXA6000-2Q NVIDIA...

I attached the dmesg and nvidia-smi -q output as files. Also here is the config for that specific client ubuntu 24.04 vm: root@titan:~# cat /etc/pve/qemu-server/1102.conf agent: 1 balloon: 0 bios: ovmf boot: order=scsi0;net0 cores: 8 cpu: host efidisk0...

can you post the output of lspci dmesg from the host? and nvidia-smi -q from the guest? since you can install the driver and nvidia-smi (in the guest) shows the card, it's a different issue than the OP, so it might be better to open a new thread

...lxc.environment: NVIDIA_DRIVER_CAPABILITIES=compute,graphics,utility,video lxc.hook.mount: /usr/share/lxc/hooks/nvidia root@gpu-test:~# nvidia-smi Wed Sep 3 14:41:52 2025 +-----------------------------------------------------------------------------------------+ | NVIDIA-SMI...