Search results

Hi folks, After upgrading debian distro and then updgrading Proxmox, something seems to be wrong with GRUB. Possibly it should be updated? Upon boot, I can select items in the GRUB menu, and even in the submenu. Booting into recovery mode does not work. But when I select to boot Proxmox, I...

Follow up: slight improvement Hi, I'm following up on the previous post. One way or the other the "old" and original network config does not work. I think this is normal, because I'm trying to operate a single LVM Proxmox harddrive on totally different hardware. I've now been able to add a usb...

Hi everyone, I'd like to request some help to see if I can: - get an old system connected to the network again - see what files are possibly recoverable History: A couple of years ago, probably 2019, I started out with Proxmox. At that time I ended up with two Proxmox machines. Today: Those...

For completnes sake: I have attached a monitor to my Proxmox box, can't do a screengrab but here's at least a picture showing lspci. Further: In the mean time I've done minimal reading on DHCP config of opnsense, this has learned me that there are 2 DHCP servers on-board, ISC DHCP and Kea. I...

Ha ha!, that's exactly the one I set out to follow. Does not work out of the box (anymore) At least for me, pci pasthrough does not seem to function as expected => QEMU exited with code 1 I'm not aware what this error means, and can't seem to find proper explanation on the www.

Thanks!, I'll have a look! At the moment I'm partly up-and-running with Proxmox/opnsene... Only DHCP does not seem to work, but I still need to do more testing.

Thanks for clarifying!

Sorry, are you referring to "QEMU exited with code 1"?

Update: Ok, in the mean time I've done more experimenting and testing, during which the count of vm's is now - 4 pfsense vm's - 3 opensense vm's What are the results? - I've been experimenting a bit with Proxmox firewall, and for the time being I have following result: - 1 opensense vm...

Some more info: - As a matter of fact, I started out following Techno Tim's youtube video. A bit later I realized that it dated May 16, 2020.. so that explained, things have obviously changed, and I could not get it to work. - I have also been looking at youtube video's from Lawrence Systems...

Might it be because this system does not support IOMMU? This is what my system shows in BIOS: As far as I'm aware, everything related to Virtualization is enabled. The single setting that was not enabled was this VT for Direct i/o, and as I am not familiar with IOMMU, I have guessed that this...

Some more trying to better understand: I have been spending quite some time following guides on the internet and such. Here are my thoughts / questions: I'm running on older hardware, so I wonder if it supports IOMMU. Did some searching and changed some settings in the BIOS Thanks for chiming...

Thanks for helping out! I've no clue as to where to disable cheksumming. Did search and the only thing a bit helpfull to me is this post at it-notes.dragas.net. Where it says: To remedy the situation, I made the following modifications: Added the following to /boot/loader.conf...

about 2 hours ago Hi, I'm seeking some help with getting started with Pfsense running virtualized in Proxmox. As this is a bit in between Pfsense and Proxmox, I have also posted in Netgate forum. What I have: Dell Optiplex 980, with i5 cpu onboard nic 2x Intel 1 GB nic Proxmox 8.2.7...

Hi folks, A quick question: Situation & some facts - Ikea Tradfri Gateway (two pieces) - for some (to me unknown) reason, it seems or seemed that my first and oldest gateway had died, or was dying - to replace it I purchased a new one (Ikea) to only find out that the newer generation Tradfri...

Thanks for the educative hint ;-)

Worked like a charm! Thanks a ton to all you guys!

Thanks a lot! Will look into it and post back. Will probably be for the next couple of days.

Hi folks, I am trying to revive an old proxmox machine. Thanks to the help of the forum I have already been able to rename and move a couple of vm's, and upgrade to debian bullseye and upgrade proxmox from version 5.x to 7.4-18. So far so good. At the moment I'm withheld from creating...

Doing some more searching I found this post. systemctl stop pve-cluster /usr/bin/pmxcfs -l [main] notice: forcing local mode (althought corosync.conf exists) I followed that after sw-omit's suggestions a couple of posts before this one, I was then able to mv the files from the old pve name to...