Search results for query: hba truenas passthrough

Hi i’m trying to setup in Proxmox with 2 U.2 SSD drives in a Windows Server 2022 Stantard VM to been used as disaster recovery offsite backup to be taken away once a week (one installed in a detachable tray to be swapped with a second drive) and i’m having problem trying to make hotswap work on...

PVE doesn't offer any NAS functionalities. You can run a SMB/NFS server, but then you have to install and manage that using the CLI yourself, like you would do it with any normal headless Debian server. Best would be to get a HBA card with some dedicated disks for that NAS only and then use PCI...

Hi All , I have been trying to figure this out in the passed weeks by troubleshooting and trying all the possible solution here people facing with no luck , right now the source of the crash identified after multiple tries and reached the point to try to have help and submit it here . I have...

Amazing, just like Hyper V like I'm doing now?

u can passthrough a hba controller to your truenas vm and then u ony have to import the pool

Hey @Dunuin , im sorry but i can't replicate it. I tryed everything to trigger an "unscheduled system reboot", but it doesn't appears here. Sadly i can't passthrough an HBA here, but i made 6x32gb scsi disks and configured them into an Z2 Raid in TrueNAS. What i tryed: - Reboot Truenas -...

Yes, both are "TrueNAS-13.0-U5.2". One with 1x SAS2008, one with 2x SAS2008 HBA passthrough. VMs: bios: ovmf boot: order=ide2;scsi0 cores: 8 cpu: host,flags=+pcid;+spec-ctrl;+ssbd;+aes efidisk0: VMpool2_VLT_VM8K:vm-144-disk-1,efitype=4m,size=1M hostpci0: 0000:03:00,pcie=1 hostpci1...

To begin, I confirmed that my processor supports VT-x, VT-d is enabled in the BIOS and I turned IOMMU on in Proxmox I installed Proxmox this week for the first time and created 5 VMs that all run relatively well. I am attempting to create either an Unraid or TrueNAS VM that requires hardware...

Wenn du einen HBA hast, dann kann du oft PCI Passthrough nutzen. Dann hast du keine virtuellen Disks und deine TrueNAS VM kann direkt auf die physischen Disks zugreifen. Wenn es dir primär ums NAS geht würde ich PVE weglassen und einfach nur TrueNAS Scale bare metal installieren und das dann...

New Proxmox user here. I have a TrueNAS Core 13.0-U5.2 VM. It is installed in a WD Blue SSD named VMs_CT_Main. I have passed through a Dell H310 HBA to it with 8 HDDs attached. Below is the config of the TrueNAS VM. kristian@pve:~$ sudo qm config 100 [sudo] password for kristian: agent: 1...

Yes. But if you want the HDDs managed by TrueNAS you don't need to create a ZFS pool with them on PVE. You would use PCI passthrough to passthrough the whole HBA with all disks attached to it, into your TrueNAS VM. TrueNAS then could directly access the unpartitioned physical HDDs and you would...

to answer your question, I just went that route and cross-flashing my H330 mini to HBA 330 mini, and no you don't need the kernel patch anymore, it just works flawlessly and I passed it to OMV VM. I was too lazy to downgrade the kernel and apply patch, so cross-flashing is way easier.

Thank you for that suggestion! I am open to both options for 1 large pool or 3 separate. I believe if I go the three separate pool option I could leverage Pool 1 - Operational Pool (Active VMS, User File Share, Other Stuff) Pool 2 - Backups? Pool 3 - Another Use Pool. One large pool would...

Do you want to combine all three servers to one giant pool or do you want to have three separate pools? If you want to have one giant pool or other centralized management options, you can install truenas scale on all three servers, pass all disks to the truenas vms (pcle passthrough the entire...

I have a 3 node cluster of servers (OCT) that each have 4 bays. I want to maximize my ability to leverage these 12 hard drives as a repository likely backups across this environment. Each server has these hard drives managed by a S3008 HBA. I attempted to try ceph but I could not manage to get...

Depends... For your VMs/LXCs you really want local SSDs. Virtualizing TrueNAS works fine when passing through the HBA, but keep in mind that your GPU + HBA can't be in the same IOMMU group. Those two or three PCIe 16x slots will probably share the same IOMMU group. You might need a GPU that can...

First many thank you your prompt reply. So As far i can understand, on this server with this cpu i will definitely need to increase the ram to 64 therefore 32 for truenas and 16 for each of the other vm (i will not run windows or debian as vm on this server) If on the other the hand if I...

ZFS needs alot of RAM and CPU performance. I for example gave my TrueNAS Core VM with 4x 8TB HDDs 32GB RAM + 8 vCPUs and when writing stuff I can see the CPU peaking at 100% utilization (but I'm also using encryption and zstd compression streasing the CPU a lot). So yes, 2 vCPUs isn't great. I...

Okay I would need your help choosing the right LSI HBA card and SSD disks, here are a few links, just let me know which one do you think is the right to buy: LSI HBA card LSI SAS 9210-8i 8-port 6Gb/s PCIe HBA RAID SATA Controller card New LSI Internal SAS SATA 9211-8i 6Gbps 8 Ports HBA PCI-E...

Hi folks, I'm reading and testing now for two days, but I can't get it running and hope for a hint from you guys. My HW: Board: Supermicro X11SCH-LN4F with C246 chipset CPU: Intel Xeon E-2176G Soft; Proxmox 7.4-3 Kernel: 5.15.107-1-pve Goal: Setting up a VM (or LXC) with Frigate and passing...