Search results for query: boot GPU

hi @mrmrv not sure what has happened since but i done a reboot of the vm (debian 13) that had the gpu passthrough and selected the latest kernel and it picked up the gpu successfully. so to recap mine works with latest proxmox host and latest selected on boot in VM (6.12.57+deb13-amd64) prior...

Hello, I currently have a Windows 11 VM with a GPU passed through and VBS hypervisor enabled. I currently need it enabled because of nested virtualization/game anti-cheat whitelist. I have some strange performance problems with this setup. When the hv_passthrough flag is enabled. The CPU...

Hello everyone,My Windows virtual machine isn't running smoothly, and I'd appreciate your help troubleshooting. Thank you in advance. (Note: My English isn't very strong; this post has been translated.) 1. Hardware Overview Device: Minisforum N5 CPU: AMD Ryzen 7 255 RAM: DDR5 64GB Storage...

Hello everyone,My Windows virtual machine isn't running smoothly, and I'd appreciate your help troubleshooting. Thank you in advance. (Note: My English isn't very strong; this post has been translated.) 1. Hardware Overview Device: Minisforum N5 CPU: AMD Ryzen 7 255 RAM: DDR5 64GB Storage...

I apologize for the inconvenience and thank you very much for your detailed guidance. The issue we are experiencing is that when a VM with a GPU assigned is shut down, it becomes unable to start again. Currently, the only way to resolve this is to reboot the Proxmox host itself. I tried the...

Hello. I'm using a Radeon 5700 connected to Proxmox. However, once this assigned VM is stopped, I cannot restart it without rebooting the host machine itself, as it displays the following error. If you know a way to restart the VM without having to reboot the host machine every time, please let...

I have a AMD W7600 GPU and am trying to pass it through to a vm. I have gone through the process of passing through a gpu and as far as I can tell everything is working fine when passing the gpu through to a windows 11 vm - the vm has been running without a hitch. The issue arises when I...

Today I upgraded 2 nodes to 9.1-6.17 of my 3 node cluster and both failed to boot with the 6.17 kernel into a bootloop. It boots into grub and after selecting the 6.17 kernel the machine just reboots For some reason `systemd-boot-efi` seems to be installed, but also seems to be on my last 6.14...

If there is no other GPU and therefore no Proxmox host console then you might need to boot a Linux Live CD/USB, mount the Proxmox root partition and edit /etc/network/interfaces that way. Since not all Linux Live CDs support ZFS and might run a different kernel, the network device names might be...

On the 8700G, unbinding and bind amdgpu is possible, but switching between configurations like amdgpu - vfio-pci - amdgpu - vfio-pci is not achievable. After unbind amdgpu, you cannot bind vfio-pci. vfio-pci is only bound during VM startup. As a result, amdgpu bind fails with an error, and the...

On the Ryzen 7 7700, you can change the driver using the command as shown below, switching between drivers such as amdgpu - vfio-pci - amdgpu - vfio-pci... > echo "0000:10:00.0" > /sys/bus/pci/drivers/amdgpu/unbind 2>/dev/null Sep 20 13:22:56 pve2 kernel: Console: switching to colour dummy...

Was there anything else you did? I tried this and it didn't work.

Regarding RTX4060Ti pass-through operation. When repeatedly starting and shutting down a Windows 11 VM, the GPU can be passed through successfully and the VM can be started and shut down continuously. When resetting a running VM using the Proxmox GUI or a command, the UEFI screen is not...

Hello all, I've a fresh install of Proxmox 9.1 on a new server. I've installed Windows 11 to have a gaming server. But the performances are not good. I've installed the latest AMD Driver ; GPU is correctly reconized in Windows. => Passmark : 4400 (I should have ~25 000) 3D => DirectX 11 ...

PVE 9.0.3, lab environment Did not have this issue using PVE in a past install with same hardware. I am doing a standard disk pass-through (see commands used below). Sometimes the Windows guest will boot, oftentimes not. KVM says the disk is not available and when you check `lsblk`, sure...

I think i got this message too when installing PVE 9.1 but after a second the Grub Boot screen showed up anyway. You could try nomodeset or hook up a display to your GPU or remove the GPU, install PVE and then reinstall the GPU. Not sure if IPMI works correctly when a discrete GPU is installed...

quick google got me here and wow! You have helped me a lot here. I wasnt able to get Alma 10 to go. I changed x86-64-v2 to x86-64-v3 SeaBIOS to OVMF (UEFI) boot i440fx to Q35 now I am installing! thx again

You could try to edit the grub boot entry, remove the "quiet" and "splash", then you should see more verbose messages on boot. Other things to try: - try to boot with the older kernel 6.14 for now, should be selectable in grub boot menu? - disable c-states in bios (known to cause stability...

@AusKee make sure you have rebar/rombar disabled in your BIOS. I saw weird stuff in dmesg and in the end it was rebar (it might also be the split lock detection im not sure anymore) i only use: cpu: host,flags=+aes args: -cpu host,hv_passtrough and also ive set: cat /etc/kernel/cmdline...

So for what it's worth, I recently migrated from Unraid to PVE w/ TrueNAS VM. I'm not sure I can be of much help, but maybe explaining my journey will help you a little... My old setup was bare metal Unraid w/ (3) 12TB HDDs in an XFS Unraid array and a 500Gb NVME as a cache drive. Hardware I...