Search results for query: 192.168.100.2

@fstrankowski: Ja 3x OVS Bridges, 2x davon in Benutzung & eine Linux Bridge. Diese Setup habe ich seit ich mit Proxmox angefangen habe. Ausgabe um die niedrigen Werte gekürzt, da ich das Zeichen Limit gesprengt hab. Ausgabe slabtop -o: Active / Total Objects (% used) : 20897818 / 21357678...

I have a Dell Optiplex 3020 proxmox server with VMs and LXC containers. Some LXC containers have network connectivity without issue but when I create new containers they cannot reach my network or the internet. That happends wether IP is static or DHCP. Working internet and network...

hi, I create vlan interfaces on the vmbr0 interface using the api by posting a request to https://192.168.1.10:8006/api2/json/nodes/node001/network/vmbr0.100" That part works fine, they show up in the gui, but they are not applied. The vlan works when I press apply in the gui but how to apply...

According to AI, my SSD patriot P200 are old disks and not very suitable for ZFS. They have 39000 hours of operation which is more than 4 years (that's true). I had Proxmox 8 on ZFS RIAD0 and now I have Proxmox 9 on ZFS RAID1 (mirror). Could this be the problem? AI advised me to use this zfs set...

Hallo, verwendet habe ich diese Anleitung: https://pve.proxmox.com/wiki/OpenVPN_in_LXC der LXC hat folgende Konfiguration: root@PROX:/etc/lxc# pct config 100 arch: amd64 cores: 1 features: nesting=1 hostname: OVPN memory: 2048 net0...

Hi @Dunuin, I am also new to Proxmox/this forum, and my first challenge is similar to this one, where I can login with root access to Proxmox, but I cannot connect using the web GUI. Seems like there are many posts where people struggle with this. In another thread, user @bbgeek17 suggests...

Failed again I am afraid. Same errors as before. Something is wrong with this. I cannot seem to connect to anything. Impact, I did run your code and still no. root@Homelab:~# apt-get update && apt-get dist-upgrade Ign:1 http://ftp.us.debian.org/debian bookworm InRelease...

Hi What would be the best Proxmox nodes network configuration to connect NFS VM datastore as a shared storage? As far as I understand Proxmox recommends to use bridges and do not assign IP directly to interfaces. I configured a switch with LACP and it passes two VLANs (10 and 20) to Proxmox...

Happy New Year, since the end of November last year we are experiencing issues with one of our proxmox clusters, which we cannot get a grip on. The issue first appeared as a terraform provider tried to create some resources. The runs frequently failed with HTTP response code 596, timeout when...

For bonding you need to remove vmbr0, create first a bond, over this bond create again vmbr0, and over this vmbr0 create the VLANS asI told before. DO NOT APPLY BEFORE CREATING THE MANAGE (access to Proxmox GUI) SETTINGS, or you lose the access to manage Proxmox. (I recommend to create a copy of...

Ich betreibe Proxmox VE auf ZFS mit einer zusätzlichen ZFS RAID0 Spiegelplatte (ZFS Pool "tank"). Ich habe mehrere LXCs, die ihren Datenbereich per Mountpoint von tank erhalten. Ich habe nun mein Proxmox VE mit Version 9.1.4 neu aufgesetzt. Meinen ZFS Pool "tank" mit den Daten-Subvolumes meiner...

I hope you had a good start to the new year. I finally got around to replacing the hard drive in my local PBS. Unfortunately, the sync job is still failing. I tested both kernel versions again. Here are the logs from the sync task of local PBS: 026-01-03T17:21:47+01:00: Starting datastore...

I think Expectations are on the Floor right now :p. You didn't read my Reply: What I provided is the Configuration of one Proxmox VE Host, but it's fairly representative across the Board with my other Servers. Depending on which specific Proxmox VE Host we are talking about, it might be...

So i have been messing with SDN trying to have different vms on different nodes communicate with each other. After a bunch of failures I got it. I basically wanted a locked down subnet internal to proxmox. This is my last issue I need to solve. Both my nodes are dual niced. One for management...

Not at all. my (and everyone else's) participation in this forum is voluntary. Nothing you provide (or not) is necessary as long as you dont expect anything in return. you have 4 ports. how are you attaching them to 7 different devices? More importantly, are they all connected to each other...

Is it really necessary :p ? I feel most of your Comments are about VLAN, whereas the Problem I described is about the Bond (and potentially Bridge) Interface. 1. Right now pretty much only one Physical Interface is connected to a Managed L2 Switch. What I provided is the Configuration of one...

I think you should always use static IP. Besides that, check the /etc/hosts to match the IP and the server name, like this: 192.168.100.10 pve01.network.local pve01

Is there one / several Configuration Errors on my Side ? If not, what is the best Way to solve this ? Create a dummy Network Interface that is always present and set that as Default (even though it makes no sense) ? EDIT 1: the following is a bit of a Hack but it works ;) Basically create a...

I started migrating from pure Bridge Network Setup towards Bond based Network Setup on several of my Hosts now, after I accidentally created a Network Loop by plugging in multiple NICs (physical Interface connected to vmbr0 in Proxmox Network Configuration) into a Physical Switch, all while...

Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0032 100 100 050 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0032 100 100 050...