Search results for query: 192.168.100.2

To solve this add the vlans in the vmbr0 config (not only bond0) with the parameter ovs_ports auto vmbr0 iface vmbr0 inet static address 192.168.100.110/24 gateway 192.168.100.1 ovs_type OVSBridge ovs_ports bond0 vlan10 vlan30 vlan110 vlan130 vlan150 vlan200

Hello, Yesterday I configured a bond with two interfaces. After this change when i modify a simple configuration of a tag of vlan for example, when apply the configuration in the GUI this action delete the config of all vlans in the vmbr0 Scenary: 2 physical interfaces 1g 1 bond 1 vmbr0...

Hello, I’m facing an issue with asymmetric SMB performance between two Windows systems, while raw network tests show almost full 1 Gbit/s throughput. Environment Hypervisor Proxmox VE host. A Windows Server 2019 VM running on Proxmox, hosting an SMB share (e.g. \\192.168.xxx.20\shared\iso). VM...

Hab versucht das in einer VM zum laufen zu kriegen aber leider auch erfolglos und auch nachdem ich in der Fritzbox ein unter Netzwerk - Netzwerkeinstellungen - Tabelle für statistischen Routen dies in der Fritzbox eingetragen habe mit diesen Daten. Netzwerk - 100.64.0.0 Subnetzmaske -...

I have reconfigured a small homelab from ZFS to Ceph just for interest, running a small bunch of services. All has been running pretty smoothly over the last few days. I have 3 nodes, each with a Samsung 980 Pro 2TB (50GB root etc, balance of 1.8TB used for Ceph). I know, not ideal, but ok for...

...auto lo iface lo inet loopback iface eno1 inet manual iface enp4s0 inet manual auto vmbr0 iface vmbr0 inet static address 192.168.100.2/24 gateway 192.168.100.1 bridge-ports enp4s0 bridge-stp off bridge-fd 0 auto vmbr1 iface vmbr1 inet static...

...the ip a shows "enp4s0" see below: auto lo iface lo inet loopback iface eno1 inet manual auto vmbr0 iface vmbr0 inet static address 192.168.100.2/24 gateway 192.168.100.1 bridge-ports enp3s0 bridge-stp off ridge-fd 0 How to i get the other interface to come up? I've rebooted and reset the...

Hi, I am new to proxmox and isntalled proxmox 9 but after Installtion I can not able to access the the GUI from a web browser. Errors shown in the browser console to access https://10.25.1.223:8006 /PVE/StdWorkspace.js - 500 (no such file '/PVE/StdWorkspace.js') I can access the machine through...

Oh mein Gott, das wars. Vielen Dank xD ich habe vor ein paar Jahren die DHCP Range auf 192.168.178.100-200 eingestellt, da ich immer manuelle IPs zuweise. Dann wahr jetzt wohl voll mit den ganzen SmartHome Geräten usw. Verstehe nur nicht warum es nicht funktioniert hat, als ich der VM/LXC...

Do you have any other issues with G10 under Proxmox. Currently I am running it for 10 days and this evening it restarted for the 4-th time in this 10 days period. But after restart it stays in bios screen and no matter you are set up - only a full restart (with removing power cable) can extract...

...mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 5a:c0:fc:50:e6:61 brd ff:ff:ff:ff:ff:ff inet 192.168.100.2/24 scope global vmbr0 valid_lft forever preferred_lft forever inet6 fe80::58c0:fcff:fe50:e661/64 scope link proto kernel_ll valid_lft...

Here's my LAN configuration: Gateway eero IP Address: 192.168.4.1 IPv6: Enabled DHCP & NAT: Automatic LAN Subnet: Managed and hidden, but it's 255.255.252.0 Here's my IP configuration for the workstation: ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : MyDesktop...

So you have a separate NIC that is your Proxmox GUI?

I did this with pfSense, not OPNsense, but the differences should be immaterial. My hardware set up is an ASrock Industrial IMB-V2000M motherboard, with two built in Realtek NICs and an Intel X520 dual port SFP+ 10gbe NIC. The first step was to get the Realtek NICs operational, which may not...

Moin Allerseits, So einmal meine Antworten auf eure Fragen / Anmerkungen. Das sagt der Status von Tailscale auf den Subnetz Router. root@TSSubnetRouter:~# systemctl status tailscaled * tailscaled.service - Tailscale node agent Loaded: loaded (/lib/systemd/system/tailscaled.service...

Hi. I have an issue where the dashboard says one of my vms consume 100% (or more ) of the ram allocated but when I run TOP consumption is much lower. ANybody any ideas or files I should share. I am passing a GPU through. It is an Ubuntu server/ Conf file below: agent...

Here are the results on my test setup results, iscsi first, then NVVME same host, same storage - truenas: FIO Storage Benchmark Running benchmark on storage: truenas-storage FIO installation: ✓ fio-3.39 Storage configuration: ✓ Valid (iscsi mode) Finding available...

Here is the problem: Fresh installation of PROXMOX on new hardware. My first installation of PROXMOX ever. Main disk for PROXMOX installation is 1Tb SSD (Samsung EVO) Installation goes well, PROXMOX running on static IP 192.168.1.211, I am able to log with Web Console and ssh from my windows...

Extra update: Previous post did not work in any way. Output of /etc/network/interfaces on the first node: auto lo iface lo inet loopback iface eno1 inet manual auto eno2 iface eno2 inet static address 192.168.101.11/24 #Corosync iface eno3 inet manual iface eno4 inet manual iface...

I had another crash over night. Same as before. Powered off and on to reboot it. Over night I did stop that video LXC with cameras and GPU "sharing" (not true passthru). Since it still crashed that LXC is clearly not the problem. I have disconnected now KVM from HDMI and USB on the server before...