Search results for query: boot GPU

I'll continue finishing off my testing of the default pve kernel (Linux 6.14.11-4-pve x86_64) and then I'll move one of my nodes over to testing those additional kernels - but that will take a bit. I have a pretty comprehensive test suite for GPU workloads which normally takes around 48h. So...

Using the hookscript method from isc30/ryzen-gpu-passthrough-proxmox issue #131 for my Ryzen 9 9955HX (integrated Radeon 610M) -> Windows 11 VM setup. Issue: I need help identifying why modern CPU models cause instability. cpu: host, cpu: EPYC-v4, cpu: EPYC-v3: Lead to severe artifacts...

Does anyone here know of a way to debug this, on either the host or the guest? I have changed my qm.conf file to use virtio-vga-gl with Venus, and the VM does boot and I can access the guest remotely however when attempting to determine what graphics driver is in use, it is still returning...

Only boot, not install. This would just be a test for the bug report. What might fix your problem - though it didn’t work for me - is changing the GFXMODE setting in GRUB and then updating GRUB on your problematic host. I’m still using the old GRUB version and have it held with apt-mark hold :(

nikhosgarcia: Your recommendation helped me, and just in time - Thank you very much for posting! Mounting and making available USB's is not at all intuitive in Proxmox, and takes many hours of searching and trial and error for newbies such as myself to learn. So, to help others, following is a...

Thanks for the super tip! This is actually the only thing that ended up working for me. I had to completely reformat the 512mb boot partition and re-init. I was prompted to install additional packages in order to do so…. Which created an additional obstacle of getting networking reconfigured...

You could try setting/changing these values: CSM Configuration → Launch CSM = Disabled Secure Boot → Secure Boot = Disabled PCIe / Device Configuration → Above 4G Decoding = Enabled → SR-IOV Support = Enabled (if available) Onboard VGA / Display Settings → Primary Display = IGFX (if you...

Went from 6.14 (6.14.11-3-pve) to the 6.17 (6.17.2-1-pve) in the pve repository as of right now. Hardware: Intel Platform (Vendor: HP) CPU: i5 13500T Did a dmesg comparison, discovered these 'differences': 1) In 6.17 I dont see the line 'zbud: loaded' - which I believe has something to do...

Hi all, Hit a very annoying and odd issue, no amount of Googling (or AI) has helped. I replaced one of my servers today from an old Dell T3610, to a HP Z4 G4, and for the most part all has been ok. I didn't install a whole new instance of Proxmox and migrate over, I simply took the hardware out...

hi My issue is that I used an AMD graphics card passthrough for a Windows virtual machine, and I encountered an error when I restarted it again. root@pve:~# uname -a Linux pve 6.14.11-4-pve #1 SMP PREEMPT_DYNAMIC PMX 6.14.11-4 (2025-10-10T08:04Z) x86_64 GNU/Linux da:00.0 VGA compatible...

I know it may sound like a minor thing but in our use case it would be great to fix this: As it stands now, in PVE 9, whenever we change the "Auto boot time-out", it forgets this change on next restart of VM. I am attaching a screenshot directly from the proxmox wiki with the setting I am...

I started by setting up everything exactly as seen on : https://github.com/isc30/ryzen-gpu-passthrough-proxmox/issues/131#issue-3266798285 Next I added the pnputil /enable-device /class MEDIA /connected to the startup script as a batch file (*also the shutdown in the same way) I would seem...

DMesg also doesn't show the RPool errors that most report as part of this issue. VM config below - note that the gpu currently isn't being passed so i could get it running. I will also add that I've created a new VM, assigned the GPU and immediately crashed the host on VM boot, so clearly not...

I appreciate that this is a common issue, but every fix i've tried from both reddit and the proxmox support forums doesn't appear to be working. Issue: GPU passthrough of a P2000 Quadro was working fine prior to an in place upgrade from PVE 8-9, VM boots. If i assign a GPU and boot the VM it...

This has been adventure but I'll try to explain. Started with a working AMD desktop running Ubuntu desktop that boots off NVME. Installed a second NVME, loaded Proxmox 9 on that. Within PVE, created a VM with no disk, instead passed through that first NVME. I did PCI pass through to the MSI...

Just installed ProxMe VE 8.4-1 on my 45Drives HL15 server and ensured the ISO has the proper SHA256SUM after download. After first login I went to the update section, disabled the enterprise repo, enabled the no-pve repo and then tried to perform an initial update however received a bunch of...

I have the same GMKTec K8 mini PC. I also had windows 11 VM for gaming (This IGD is so powerfull for me) and linux VM for working. Both with iGPU passthrough. In windows 11 i had amd reset bug fix installed and it did work 4 times out of 10. But it was painfully slow to start and shutdown the...

Hi all, I have an Intel NUC 10 i7 with 64G ram that I have been trying to get Proxmox to install on. The unit was previously serving as a HTPC with Win 11 and has not shown any hardware issues. I can install PVE 9 from a USB drive in both GUI or Text UI installers without issue, however on...

Hello everyone, I'm hoping someone can point me in the right direction. I'm trying to set up GPU passthrough on a brand new system based on the Ryzen 9 9955HX (Zen 5) processor using Proxmox VE 8.x. The integrated graphics are the Granite Ridge [Radeon Graphics] [1002:13c0]. I followed the...

Thank you Uzumo, With the below config my Black screen got resolved. Much appreciated I'm using PVE8 and the below config worked 1. grub GRUB_CMDLINE_LINUX_DEFAULT="quiet intel_iommu=on iommu=pt" The grub configuration is correct. 2. /etc/modules vfio vfio_iommu_type1 vfio_pci The modules...