Search results for query: boot GPU

Hello, I have an MSI Z97 Gaming 3 with an Intel I5 4690k as well, running Proxmox 9.1.4. After reproducing what you did in "Preparation", I am left with no mention whatsoever of my processor in the output of lspci -v. I've been struggling with passing my Intel iGPU to my Ubuntu VM for media...

Recently i have reported slab memory leak and it was fixed. I am having yet another issue and wondering where to write with it. Would you be able to tell me if this is the right place or should i send it to someone else ? The issue seems also like memory leak. It happens on multiple servers...

root@GPU-Server:~# cat /etc/default/grub # If you change this file or any /etc/default/grub.d/*.cfg file, # run 'update-grub' afterwards to update /boot/grub/grub.cfg. # For full documentation of the options in these files, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0...

Sure BTW it works pretty good in my PVE now root@Flanker9900T:~# cat /etc/pve/qemu-server/ 100.conf 101.conf 102.conf 103.conf 104.conf 105.conf 106.conf 107.conf 108.conf 110.conf 113.conf 200.conf 301.conf 302.conf 500.conf root@Flanker9900T:~# cat /etc/pve/qemu-server/113.conf...

Can you post your settings for passing through the whole gpu? grub etc. thx. When I pass my b50 to a ubuntu vm, it gets stuck on boot :-(

Sorry for my late response! cat /proc/cmdline VT-d is enabled! I use the old PVE/Kernel version cause I dont have a new driver for my GPU that works.

Hello friends I could really use some help troubleshooting this error. Proxmox was running fine but the began to start hanging during the boot. This screen above is where it stops every time. Now I cannot ping the server at all, I can't access the gui, and power cycling seems to be the only way...

Does anyone else have the same problem on a ProLiant DL380 Gen10 server where the IOMMU is recognized as inactive? On my previous Gen8 server I never had a problem like that. Used hardware: Proxmox VE Version + Kernel: /etc/kernel/cmdline /etc/default/grub /etc/modules Perhaps there...

Hi everyone, I am trying to pass through a Zotac GTX 970 to a Linux VM on Proxmox, but I am hitting a wall where the Host either crashes/reboots immediately upon VM start, or the VM fails to initialize the card. Hardware: CPU: Intel Xeon E3-1200 v3 (Haswell) Mobo: Z97 Chipset (ASUS) GPU...

Hi Dominik, thanks a lot for the detailed suggestions — we followed up on all of them and here is a complete update. --- 1) MMIO size (next power of two above BAR2) You were absolutely right about the power-of-two requirement. On the host, the B300 reports: - BAR2 = 512 GB - plus additional...

Hi Dominik, thanks for the follow-up — happy to provide more details. Below is exactly how we increased MMIO, plus the requested host lspci output and full VM config. --- 1) How MMIO was increased We tested multiple MMIO sizes using the OVMF fw_cfg method, always with the VM fully powered...

I decided to give up with the potential 9.1 issues and formatted the boot disk, reinstalled with a Proxmox 8.4 image, restored the VMs and started attempting this again. I was still getting the same error on 8.4 with the 6.8 kernel. I have another machine with a 1650 Super that is passing...

This tutorial was immensely helpful, but I'm going to add a few tips that this tutorial didn't cover and required going down a rabbit hole to resolve (my install was Ubuntu Desktop 24.04) If you try to connect to the VM using the console and you get an error saying "Failed to connect to...

Hello! I would like to start with I am very new to proxmox and am currently trying to get into it. However, I have been having a very hard time trying to enable GPU passthrough so I can have my own local AI. I have followed the guide below and am still having trouble with it...

Sorry I was working double time this week is everything sorted .. Did you get the file from me .. :) Cheers :)

Hier noch mal eine Zusammenfassung der Installation auf einem Secure Boot aktivierten System, welches mit PVE 9.1 installiert und auf aktuellem Patchlevel gebraucht wurde... Kernel: 6.17.4-2-pve PVE-Manager: 9.1.4 NVIDIA vGPU Treiber: 580.126.08 Als erstes diese Kommandos eingeben und alle...

Es war definitiv Secure Boot: # insmod /lib/modules/6.17.4-2-pve/updates/dkms/nvidia.ko insmod: ERROR: could not insert module /lib/modules/6.17.4-2-pve/updates/dkms/nvidia.ko: Key was rejected by service Nach diesem Kommando: mokutil --import /var/lib/dkms/mok.pub Und dann reboot mit start...

Hello, I have finally made it work with following 140.conf (please note there is no args, with which it didn't start for me and also the display is set to default: acpi: 1 bios: ovmf boot: order=scsi0;ide2;net0 cores: 4 cpu: host efidisk0...

Hi everyone! This is my first post, so apologies if it's in the wrong place. I have a very specific use-case that I would like to achieve, I'm new to proxmox and hypervisors as a whole, but I've learned a lot over the past month or so and I've got a few VMs set up and working perfectly with...

Hello! I am also trying to pass through GPU with PVE to a debian VM on Minisforum MS-A2, I have also AMD Ryzen 9 9955HX 16-Core Processor and Radeon 610M. I followed the steps in README.md, used different vbioses: vbios_9955HX.bin and vbios generated based on README.md. I have also used...