Search results for query: vendor-reset

Hi, thanks for the input. I've run the commands you've provided and all the smart tests return NO errors whatsoever. Running the dd command however returns the same error as when I try to backup that VM, as in Input/Output error. Results provided below. nvme list Node Generic...

You might want to look into vendor-reset for a RX580 (on this forum or on the internet) to make sure it resets properly when you stop and restart the VM.

Vielen Dank erstmal für die vielen Tipps. Wie ihr sicherlich bemerkt habt, bin ich an das Thema proxmox server etwas unbedarft ran gegagen. Mein Problem aktuell ist, dass ich eigentlich nur den NVME M2 slot frei habe. Sämtliche meiner normalen SATA slots habe ich mit den Festplatten belegt...

CCF_STAND and CCF_STOPP (from 2 ;) ) to 1 you can do on all disks at once (but wait for the format to complete as it's running now). The recommendation with only 1 disk at a time was only meant for IDLE_C, STANDBY_C and STANDBY_Z. ;) Nice! :) Be sure to check smartctl -x again (i.e. twice after...

Thanks for the help! Here's the output of the smartctl command on sda device (sdparm at the bottom). hd-idle was disabled when these outputs were collected: === START OF INFORMATION SECTION === Vendor: SEAGATE Product: ST8000NM014A Revision: CSL9...

Hallo, ich versuche gerade eine VM bzw. eigentlich ursprünglich einen LXC Container mit einem USB-CanBus-Adapter zum laufen zu bekommen. Leider ist der Versuch mit dem LXC komplett gescheitert, da das durchreichen des "Netzwerk-Adapters" namens can0 nicht geklappt hat. Soll heißen, es kommen...

giving the command "sudo smartctl -a /dev/nvme0n1" on the OS disk gives me this Output and I know that the disk has some errors

I'm trying to figure out why the A770 that I'm passing into a W11 VM seems to be stuck a PCIe x1 speeds, I've checked this via: GPU-Z HWiNFO Intel Graphics Software All reporting the link speed as x1: GPU-Z Initially shows "PCIe x1 1.1 @ x1 1.1" Then switches to just "PCI-Express" Even when...

Now I have a nvidia GTX 1660 Super and only get a black screen. Seems to be Nvidia driver issue. For me works 470

Installed proxmox is the new version. I did not do anything to the gpu just popped it in there and hoped for the best... By not booting i mean that it stays here for a long time like 10 15 minutes and nothing. How can i undo changes if I cant even get there through rescue and recovery mode...

...PVE 8.3. Most of what you added to GRUB is now nonsense or outdated. Or are you running an outdated version? A RX470 probably requires vendor-reset; did you install it and set it up for a device_specific reset? I'm not sure what you mean by "doesn't boot". Is the photo of the display from...

...VM works after fresh reinstall. Manjaro VM doesnt get a picture sometimes otherwise after shutdown it end with no signal on monitor. vendor-reset is installed. Kernel 6.8.12-7 Why ? My VM Conf: agent: 1 bios: ovmf boot: order=scsi1;ide2 cores: 6 cpu: host efidisk0...

...of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" root@R730xd:~# dkms remove vendor-reset/0.1.1 --all -bash: dkms: command not found If there is anything else that I can provide to assist, please let me know.

I am trying to get this accomplished but I am lost on the vendor-reset part. Is there something to explain getting into that part? Edit: I have gotten the vendor-reset all setup and I am able to install the official drivers but get error 43. Do we still need to add the rom as well as the second...

You can Switch on Boot via Grub back to the Normal PVE Kernel

Yes but kernel broke my passthrough thats not funny! . Iam give 7.4 a try. how can I install your special kernel ? I only know to install default kernel and vendor reset must work for my AMD GPU

Ok I`ve tried mapping but same issue again black screen. Only after 3 times Start&Shutdown of my Linux VM it come up with picture from my ASUS RX 570 I` ve tried internal or external storage but always same issue! Is this kernel compatible with amd vendor-reset?.

sporadically i can get a picture of login screen, but after shutdown the vm i cant get picture anymore but vendor-reset still there

...but only windows vm got a picture. My Linux VM stays black screen. iam going to update kernel now to 6.8.12-7-pve-signed. Cant install vendor-reset always get modprobe vendor-reset modprobe: FATAL: Module vendor-reset not found in directory /lib/modules/6.8.12-7-pve Can anyone help me with...

Hello, to all Proxmox fans, I use a pve host with the following hardware: Intel i5 10400 Asrock b460m Pro 4 64GB Corsair DDR4 RAM 4 SSD hard disks 2 HDD hard disks AMD RX 570 from ASUS including vendor reset Now it stopped working for my Linux VM, but in Windows 10 VM it worked perfect. I want...