Search results

  1. S

    Frequent crashes - [Hardware Error] CPU RIP TSC PROCESSOR - Kernal panic

    Thanks for your reply. Willing to try. but is this in any means linked to my issues?
  2. S

    Frequent crashes - [Hardware Error] CPU RIP TSC PROCESSOR - Kernal panic

    Since a while I have intermittent crashes. Like these: (although it says it reboots, it does NOT) It happened a lot: My current setup: Intel NUC8i5BEH with 16GB RAM 500GB Samsung 980 PRO SSD pve-manager/6.4-6/be2fa32c (running kernel: 5.4.114-1-pve) All bios for NUC & SSD up-to-date What I...
  3. S

    device-mapper: thin: process_cell: dm_thin_find_block() failed: error = -5

    Yes, it did not whipe it. Yes. The firmware update was very cumbersome. I used an external usb stick and had to try and format in various ways before is was working.
  4. S

    device-mapper: thin: process_cell: dm_thin_find_block() failed: error = -5

    Yes, that works well. No, it's only the firmware of the drive. However Samsung advises to backup the data :-) I have a 980 pro, it was listed here: https://www.samsung.com/semiconductor/minisite/ssd/download/tools/ I don't see a 970 pro but I do see a 970 plus...? sorry I can't be of any...
  5. S

    Cant start/stop LXC and disk is full...

    Yes same error... I deleted the LXC and started over. Definitively something was wrong (from 6.4.4 to 6.4.5...). Thanks for the reply.
  6. S

    Cant start/stop LXC and disk is full...

    I have an LXC: it is running, but not:? When I press shutdown it says: i have resize the disk from 32G to 64G but that does not help at all. Rebooted the entire host... no avail: I cannot stop it and not start it... it is not running but not startable: help?
  7. S

    device-mapper: thin: process_cell: dm_thin_find_block() failed: error = -5

    I updated the Samgung firmware of the NVME SSd and all problems are gone!
  8. S

    device-mapper: thin: process_cell: dm_thin_find_block() failed: error = -5

    Hi, thank you. I have no errors in the syslog of these only on the screen. I cannot log in the gui or anything else and cannot see any logs. also when repowering I do not see any of these messages in the gui log. I do not know how to use the command. I tried these without luck: smartctl --...
  9. S

    device-mapper: thin: process_cell: dm_thin_find_block() failed: error = -5

    Update the firmware of my Samsung Pro 980... not that I could see it was not up to date but "it took an update": https://www.samsung.com/semiconductor/minisite/ssd/download/tools/ Will monitor. In the meantime I could use all the help I need.
  10. S

    device-mapper: thin: process_cell: dm_thin_find_block() failed: error = -5

    Found this: https://forum.proxmox.com/threads/problem-with-intel-nuc-and-proxmox-troubleshooting.66035/ But I have a Samsung 980Pro, the system is only 2 months old... how can I check if the nvme is faulty?
  11. S

    device-mapper: thin: process_cell: dm_thin_find_block() failed: error = -5

    Please help me, I am desperate. It worked for around 2 days and now down again. Portscan shows me still activity on port 111 rpc. Ping possible, rest down... help!
  12. S

    device-mapper: thin: process_cell: dm_thin_find_block() failed: error = -5

    Then I do not see these messages in the logs... At least, not now. I can send the entire log in a PM if you whish. And should there be any of these errors in the log after a restart (power off/on)? I a did not have the issue this morning, but it is just a matter of time. It seems like if...
  13. S

    device-mapper: thin: process_cell: dm_thin_find_block() failed: error = -5

    Ho do I get these? I use a most decent and standard Intel NUC8i5 with 16Gb RAM and Samsunf NVME 980 Pro running latest firmware... Are you saying this could be a hardware issue?
  14. S

    device-mapper: thin: process_cell: dm_thin_find_block() failed: error = -5

    Ok, it is now crashed again. This time I have no image on hdmi out at all. I am able to ping the device on management interface. All other communication is lost. PLEASE HELP ME how to troubleshoot this!
  15. S

    device-mapper: thin: process_cell: dm_thin_find_block() failed: error = -5

    FWIW... it's now again working for over 24h... but like last times it will crash again... but when... again. Please continue to assist me :)
  16. S

    device-mapper: thin: process_cell: dm_thin_find_block() failed: error = -5

    root@proxmox01:~# lvs LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert data pve twi-aotz-- <338.36g 9.92 0.95 root pve -wi-ao---- 96.00g...
  17. S

    device-mapper: thin: process_cell: dm_thin_find_block() failed: error = -5

    Hello, and welcome me to the forums :). I am a recently joined proxmox user and just joined forum user. I would like to have some support. I am relatively new to this so do not shoot me for giving too less information :). I run this machine now for around 5-6 weeks and most of the time it runs...