Search results for query: wifi

  1. U

    Taking too long to load

    ...of my router and one that is not occupied by other devices. The DNS and gateway IP I got from ipconfig on my laptop that is connected through WiFi. I am trying to setup the PVE on my old PC which is connected to the internet through ethernet. Please, can someone help me please. Thanks so much.
  2. M

    Proxmox over WIFI (WLAN)

    ...Mercusys ME60X (30$) Wi-Fi repeater with an Ethernet port and connected my home laboratory to it. Everything is functioning properly. Zero effort to make the network work, just set repeater router address as gateway. I think 300mb is limit of my wifi5 network, later I'm going to try it with...
  3. G

    VM Linux host with two networks

    ...network before I can really use. I have a setup something like this. I have two routers, one connected to my laptop running linux/gnome via wifi and other via ethernet cable. I have two ip addresses and can access devices in both networks via ip addresses. I then needed a VM so i installed...
  4. T

    Can't reach web GUI

    ...normally, can SSH, container is active, no GUI. Tried different browsers, same result. Tried different computers, same result. Mine's connected via ethernet, same as server, the other one via wifi. On my phone I can access the mobile GUI on the same address, log in and see the specs of the...
  5. B

    verliert ständig Netzwerkverbindung (Ethernet)

    ...Degration geben. Bei einer doppelt verwendeten IP-Addresse kommt es immer darauf an, wer zuletzt die ARP-Tabelle befüllt hat. Bei meinen WiFi eingebundenen Heizkörper Thermostaten oder nur periodisch laufenden Systemen (z.B. Containern), kann das manchmal eine Weile dauern. Treiberprobleme...
  6. E

    Persistent VM instability with Ryzen 9 9950X3D and Proxmox 8/9

    Hi, I’m running an ASUS ProArt X870E-Creator WiFi (BIOS 1605) with a Ryzen 9 9950X3D and 256 GB of RAM. My workflow requires spawning several VMs, but I’m seeing recurrent instability in guest VMs (both Windows and Linux): after a few hours they typically reboot or hang with what appear to be...
  7. A

    [TUTORIAL] HOWTO - Proxmox VE 8-x.x Wifi with routed configuration

    One network device was for bridge(vmbr0) to LAN and another for bridge(vnet1) to wifi.
  8. Z

    Driver missing: Intel® Killer™ E5000 5Gbps LAN and Intel® Killer™ BE1750x Wi-Fi 7

    ...Guess I'll worry about that later. I actually went with proxmox 9 because I thought it would be natively supported, but it at least it natively supports the wifi card, just had to get dhcp working. (Much nicer experience than when I was trying to use proxmox 8 and couldn't even access the...
  9. G

    Purchased an AOOSTAR R7 2 Sata bays and 2 nvme bays w/ an AMD Ryzen 7 5825U (8C/16T) - looking to for recommended configurations

    I want to ask if you actually use this mini PC with Proxmox. I'm planning to buy AOOSTAR R7 2-Bays NAS AMD R7 5825U Mini PC-Black, but I want to know if aoostar is reliable. What RAM do you have there. If it works well then my plan would be Install PVE on 2x NVMe 256GB ZFS Mirror Data disks 2x...
  10. T

    Virtuelle Maschine bekommt keine IP Adresse

    ...Bereiche, Netzwerk Manager wie Netzplan musst meiden, das würde dem PVE System mit Sicherheit mehr schaden als nutzen. https://wiki.debian.org/WiFi/HowToUse Wenn es in die Hose geht, ist das System ja schnell neu installiert, du wirst im Moment da noch nichts drauf laufen haben …. Hoffe ich...
  11. news

    how to enable a BE202NGW device

    Don't use WiFi at all. I build a Nat Router on Debian12 with my raspberry pi 4 2 gb. Witch connect to my VDSL Router over Wifi 6 and local i have a 1 GBit/s privat network, i.g. 192.168.0.0/24. The raspberry pi 4 is my default gateway for the net: 192.168.0.0/24 and can route all traffic with a...
  12. S

    how to enable a BE202NGW device

    my "problem" is that when i do "dmesg | grep wifi" I don't get anything :-(
  13. C

    what do you think of this Proxmox/ceph Cluster ?

    ...nvme ports (coming from the cpu) to the backplane. I'm also planning on putting a disk(nvme or 3 sata disks(raidz1) via 'm.2 to sata card') on wifi card's slot for proxmox boot storage.(or use two-three usb to m.2 disks) A 100gbs Switch (or maybe 2 if I could stretch the budget), mikrotik...
  14. T

    Is Qualcomm's Wi-Fi 7 NIC Really This Bad? Passthrough Fails on Proxmox VE (PVE)

    Just run into the same problem. Within Linux also not working. USB/Bluetooth is working, PCIe/WIFI is not! Windows 11 24H2: Manjaro 25.0.6:
  15. M

    Unable to Achieve C6+ Idle State - Server Stuck at C3

    ...reverts back to C3 (idk why, that's stupid) Disabling Wake-on-LAN: still C3 CPU: Intel Core i5-14500 Motherboard: ASUS ROG STRIX B760-I GAMING WIFI RAM: Patriot Viper Venom DDR5 32GB x2 PSU: Corsair RM750X Storage: - Intel 480GB SSD SATA D3-S4610 (SSDSC2KG480G8) - WD Black SN770 2TB M.2 2280...
  16. T

    [SOLVED] Samba latency Issue

    ...but no change. The system is not slow: CPU: Intel 12900KS RAM: 64GB Corsair DDR5-7200 @ 4800 MHz Mainboard: AsRock B760M Phantom Gaming Sonic WIFI Network: PCIe 4.0 @ 4x - 4x Intel 226 2,5Gbit Storage: 3x NVMe SSD: 1x Samsung PCIe 3.0 128GB (don't know the model - was left over from a older...
  17. J

    how to enable a BE202NGW device

    This information isn't quite right. I've been running my Proxmox server entirely on a WiFi connection for the last three years. It hosts a large number of LXCs and VMs, and I've kept the connection current by progressively upgrading from WiFi 5 to WiFi 6, and most recently to WiFi 7. I have...
  18. H

    [TUTORIAL] 2025: Proxmox PCIe / GPU Passthrough with NVIDIA

    ...BACKSTORY I have a fairly good config with lots of storage and RAM but probably what matters here are: Motherboard: MSI MAG B660M MORTAR MAX WIFI DDR4 Micro ATX LGA1700 CPU: Intel Core i5-12400F 2.5 GHz 6-Core GPU: NVIDIA Founders Edition GeForce RTX 5090 32 GB Proxmox Version: 8.4.9...
  19. O

    need help with make command

    im trying to use make to compile a driver for a wifi dongle but it keeps failing and im not really sure how to fix it. i have installed the make package and the wifi dongle does support linux output of make command is to long so its here https://pastebin.com/hNjhMcvd
  20. L

    Wifi country setting gets resseted on reboot, how to make permanent?

    ...permanent, what would be the best way to run a small script setting the country on boot? It needs to be somewhere in the host, not in the container that will get the wifi card because iw only can set the country code in the host, not in the container, and ideally before the container gets...