Search results

hi, for short: I have changed my Debian Xen to a ProxMox host, with Enterprise repository enabled. Today I wanted to create a new VM on a single VE Host, but I get "proxy detected vanished client connection" messages. It seems, that these problem are storage related, because it happens only...

hi, my private root server runs at the moment with Debian Wheezy, Xen and six running paravirtualized VMs. I have 5 public IPs: Host itself Mail VM Web VM Jabber VM DNS One VM has only a private IP, but public IPv6. All VMs have also a private IP, for internal communications ...

hi, at the moment, all of our IBM X3550M3 / X3750M4 / Suns ... Proxmox (3.2) nodes runs with 2 x 1Gbit/s for ISCSI and cluster communication (multipath) and 2 x 1Gib/s for the external communication (bonding LACP). We planning a new network with 10Gib/s with the following hardware: For...

hi, I have for the external communication one bond0 with LACP configured (Cisco). bond0 is a trunk interface, with all VLANs I need. The problem is, that the external node address (for webinterface) is in the same VLAN, like I need for VMs. How should I configure Proxmox 3.2, that I can access...

hi, I got new 4 IBM V3700 RBODs and they are not compatible with our SAS Switch (LSI 6160) :-( So i have to move all VMs from our "old" environment to the new one. After that, I have 4 x LSI 630J JBODs with 12 x 2TB SAS (Seagate Constallation) free. My idea was to connect one JBODs to our 4...

hi, we have 5 nodes in a cluster configuration. All uses ISCSI over 2 x 1 GB in multipath configuration (ISCSI hosts are open-E DSS7 in cluster setup, connected to 2 x Raid5 volumes ( 6 x SAS 2TB Seagate) JBod via 6Gib/s SAS). At the moment we have ~30 KVM VMs active. Some with very low I/O...

hi, I migrate from ProxMox 2.x with several (KVM) VMs to a cluster enabled ProxMox 3.1. I do that with shutdow the VM, copy the image to the new host, convert it to raw and dd it to the lvm ... I thought, that there must be a problem with the converting, but I started the original VM on the old...

hi, I configured a ISCSI Volumes (14TB) and created on our VE3 cluster (3 nodes) a volume group. Now I want to assign the whole 14TB to one single VM (Bacula Backup Server). What is the best solution. Should I create one single 14878,72Gb image, or should I create several disk images (for...

hi, we have a Open-E DSS7 ISCSI Cluster with two virtual IPs for the target. Also we have 3 ProxMox 2.1 cluster, but I have massive problems to get a stable ISCSI connections on all nodes: [...] May 16 18:28:01 node-01 iscsid: Kernel reported iSCSI connection 1:0 error (1021) state (3) May 16...