Search results for query: Thunderbolt 6.8

Gentlemen, I got it working. I did a lot of trial and error and I will try to write my steps down here and hopefully you guys can confirm that this is actually the way to configure it. The problem for me is that after so much tinkering, I may have changed something that I forgot to document here...

Hi, I have a pve node on an MS-01 machine, and sometimes it gets stuck: It only responds to some commands, and the VMs but one seem to run (cannot stop/restart the stuck VM). The stuck VM uses a passed through Nvidia GPU. syslog: Jan 30 10:33:09 pve1 kernel: watchdog: BUG: soft lockup -...

I have been trying to understand if the bug mentioned with Thunderbolt devices has been resolved by any of the latest kernel updates, I’m on 6.8.12-7. I know people use Thunderbolt for many things, eGPU, NIC etc. in my case I am wanting to connect a 4 disc DAS over thunderbolt 3 which exposes...

Run these commands on PVE hosts and provide the output. modinfo thunderbolt lspci -vP | grep Thunderbolt Are you perf testing directly from PVE host to PVE host or are did you put a linux bridge on the PVE hosts and spin up VMs on each PVE host and you're perf testing there? If you're perf...

Hallo, ich habe erst kürzlich proxmox installiert und beschäftige mich damit. Ich bin zwar durchaus IT-affin, aber sowas gab es "damals" noch nicht ... also alles Neuland. Ich habe Proxmox aufgesetzt und verschiedene VMs und Container installiert. Vor allem wollte ich eine gute Basis für HA...

I have the same issues here, I try to pass through a Hailo 8 device, which in my case is a m.2 m-key device that I try to get working in an Intel Nuc 12 running proxmox 8.3.2. I tried installing the card in the nvme port and I also tried installing it in a Thunderbolt m.2 m-key enclosure (Orico...

I'm seeing this exact behavior. I did a fresh install of 8.3.0 onto a 2019 MacBook Pro to start to learn to use Proxmox. ifupdown2-pre.service fails during boot, and it doesn't bring up the network. If I log into the console and run systemctl restart networking, it comes up and things are fine...

Sorry, I was wrong. This is the adaptor that I own. However, the SSD has gone asleep again while the HDD's not 'till now. root@proxmox:~$pveversion -v proxmox-ve: 8.3.0 (running kernel: 6.8.12-5-pve) pve-manager: 8.3.2 (running version: 8.3.2/3e76eec21c4a14a7) proxmox-kernel-helper: 8.1.0...

That Sabrent adaptor is a Thunderbolt only device as far as I can see. This may also be the source of your problems. There have been problems reported with Thunderbolt on recent kernels. What does pveversion -v show.

That could be a good reason. I will try to split the disks among the buses. Whenever I try to transfer a big file between this SSD (M2 NVMe with Sabrent adaptor) to HDD it fails because one or the other fall asleep. It happens very very often, I'd say 7 times to 10 and then I can just reboot.

Try to use "intel_iommu=on iommu=pt" instead of "intel_iommu=off." This solved my problem.

Lab Equipment Overview Router: Mikrotik CCR2004-1G-12S-2XS Switches: SW01: Mikrotik CRS504-4XQ-IN, equipped with four XQ+BC0003-XS+ cables SW02: Mikrotik CRS310-8G-25+IN SW03: Mikrotik CRS310-8G-25+IN Proxmox Hosts: Minisforum MS-01 I have successfully deployed a Proxmox cluster comprising...

Lab Equipment Overview Router: Mikrotik CCR2004-1G-12S-2XS Switches: SW01: Mikrotik CRS504-4XQ-IN, equipped with four XQ+BC0003-XS+ cables SW02: Mikrotik CRS310-8G-25+IN SW03: Mikrotik CRS310-8G-25+IN Proxmox Hosts: Minisforum MS-01 I have successfully deployed a Proxmox cluster comprising...

@vherrlein Thank you for the detailed instructions. I am currently working on my new homelab and have encountered some difficulties. The network you described is being used for Ceph, and I would like to understand how to best organize access to this network from other virtual machines or the...

I am new to Proxmox and have set-up a server (MiniForums MS-01) and all is working; however I now need to expose the on-board Bluetooth to one of my VMs (Home Assistant) and this is where I get stuck :-( Given the results of lsusb and lspci below, can anyone guide me what needs to be done...

Hello! Also struggling with a thunderbolt j5 create adapter, plugging into a thunderbolt. Just picked it up, starting to think I should have stuck with the older usb connectors when I picked up the adapter. Slightly different symptoms than yours but maybe related. As far as I can tell, the...

do you know if it's possible to do it via CLI? my problem is that I created a thunderbolt network interface manually, it's working fine, but since I created it outside of proxmox UI it doesn't appear in the Migration Settings pull down menu. Thanks.

Interesting. I haven't thought about passing the thunderbolt controller through. I have no idea if that supports passthrough.

Good evening, I have a 2018 Mac Mini running proxmox 8.3.2. I've recently attached a thunderbolt eGPU with an NVIDIA 3070 GPU. I've followed countless guides, forum posts, etc. to try to get this working in a Debian 12 VM, to no avail. I can get the passthrough "working" as far as the GPU...

I was more confusing than I thought. I've got a 128 GiB NVME available, and a 1.7 TiB enterprise SATA SSD in a USB enclosure. My only PCIe slot is occupied by a NIC, so I'm stuck with this setup for now … unless I get rid of one of my mirror vdevs and devote two SATA ports to a boot mirror pool...