Search results for query: Thunderbolt 6.8

True, USB4 is much similar to Thunderbolt and does support networking. Previous USB standards don't have such support, AFAIK.

Dreaming is free :) Unfortunately USB isn't thunderbolt and AFAIK USB does not implement native networking support that may show up to PVE as a network interface that you could use i.e. to create a mesh network like the one you show. I remember there are/were some cables that have some chip that...

this is maybe just dumb question because i'm trying easy way and cheapest way to setup proxmox cluster. i have see many people setup homelab using many mini pc. what i see is jumble mesh of rj45 can't the proxmox using usb connection?. nowaday mini pc is coming with many usb port either 3.2 or...

After some digging, it appears that the fix for this is adding the kernel parameter thunderbolt.host_reset=false. So, do the following: nano /etc/default/grub # Find the line: GRUB_CMDLINE_LINUX_DEFAULT="quiet" # Modify it to: GRUB_CMDLINE_LINUX_DEFAULT="quiet thunderbolt.host_reset=false"...

Hi everyone, I am planning to set 3-node cluster using Intel NUC13, running lates version of PVE. Ideally, I wanted to use Ceph for locally installed 2TB m.2 storage across all 3 nodes, with some VMs residing on my QNAP NAS that has flash storage on it). I was hoping to use the QNA-T310G1S...

I found something in dmesg that might be useful. Its showing during second VM start: [ 121.800794] WARNING: CPU: 14 PID: 0 at kernel/workqueue.c:1798 __queue_work+0x3a8/0x4f0 [ 121.800802] Modules linked in: veth tcp_diag inet_diag ebtable_filter ebtables ip_set ip6table_raw iptable_raw...

I'll take the opportunity to thank you for your gist files! They were really useful when I set up my 3 nodes proxmox/ceph cluster with a mesh thunderbolt network a few months ago (I went with simple mesh without dynamic routing) :)

I also have a private mesh network over thunderbolt for my 3 nodes ceph cluster and wondering if it's possible to mount cephfs on external clients. It doesn't look like it's possible to have monitors listening on multiple interfaces even with multiple subnets in "public_network" UPDATE: Ok so...

Are you still running this after more than 1 year? I also have 3 MS-01 but only a single enterprise micron 7300 pro 3.84TB m2 drive in each. I am thinking about buying some 22110 3.84TB 7400 PRO to use 2 ceph OSD per server, but I'm worried about excessive heat... What are your enterprise drives...

Yeah... toggled IOMMU many times. Didn't make any difference. Since the previous message I found that after updating to ProxMox 8.3.5 the TG3 crashes were gone on the internal NIC. I kept the PCI passthrough for the Thunderbolt NIC's.

Hi all, unfortunately I have made the mistake of upgrading from 8.3.5 to 8.4.1 too. I run ProxMox on a Mac mini 2014 for home(lab) use. This has worked fine for months, until the moment the upgrade was done. I see all NIC's stalling every few hours. Since I use pfSense in a VM it also breaks...

( I actually already solved this but wanted to save others the headache ) Since the enclosure was being recognized by dmesg -w but the nvme endpoint weren't being recognized, I eventually was led to try and determine if the thunderbolt device was not authorized via the boltctl command. That's...

Howdy - On a fresh install of Proxmox PVE 8.4.1, my external enclosure is not being recognized by Proxmox. Checking with fdisk -l and lsblk I do not see the nvme endpoint being recognized. Using dmesg- w and plugging the enclosure in I do see the enclosure being recognized.

Hey guys, I'm trying to passthrough the whole USB/Thunderbolt Controller to a VM to use eGPU and other Type-C Dock.. I don't want to passthrough the eGPU as it is AMD and I want to avoid GPU Reset Issues.. Also I want to be able to boot the VM, when the eGPU is not connected.. I already...

Hello, I have a 3 node cluster and ran the Refresh / Upgrade from the GUI Update section on all nodes but one failed (node2) due to FRR package. Used hold frr on node2 to update everything else which worked just fine. I then proceeded to restart each node as recommended, one at a time to keep...

Update: the VM eventually did crash again with the same PCI bus errors. Since then I've blacklisted the thunderbolt driver and more importantly added the pcie_aspm=off kernel flag, and that seems to have made the system even more stable. Where before I was periodically seeing those Correctable...

Quick follow-up. I did not need to pass through the thunderbolt USB controller, only the NHI, for a stable display. This allows the host to retain access to many USB devices that would otherwise be passed through inadvertently to the VM. The system has been running cleanly for hours now without...

Hi, I wanted to post information here about how I got my eGPU passthrough setup (nearly) working, for the possible benefit of others who may have a similar situation. Also hoping to tap into the community's experience and get ideas on how to improve stability. Hardware: Thinkpad P16 gen 1...

I have a 3 node cluster running Minisforum MS-01 hosts, using Thunderbolt as the intra-cluster networking for Ceph. Everything was configured and working smoothly prior to recently upgrading to PVE 8.4, and kernel 6.8. I'm not exactly sure which one caused the issue, but I noticed some strange...

So I currently have a 1000/40 cable connection and I'm able to get full speed on all of my machines except for Proxmox (Host) and by extension all of the VMs, where I'm only able to get about 80-110mbps. LAN speeds however are unaffected, and I can get a full 1000/1000. Infact internet speeds...