Search results for query: Thunderbolt 6.8

The Asus ProArt X870E Creator WiFi is a fine board for Proxmox and PCIe passthrough. For those interested: IOMMU groups (with two PCIe GPUs installed): ./list-iommu.sh Group 0: [1022:14d8] 00:00.0 Host bridge Raphael/Granite Ridge Root Complex Group 1...

Tested with Proxmox 8.4 Ministorum UM790 Pro (https://github.com/isc30/ryzen-7000-series-proxmox) AOOSTAR AG02 Nvidia GTX960 Overview Activate GPU passthrough. Make the eGPU work Find the GPU and disable it from being used by the OS Passthrough the raw PCI devide to the VM 1. Edit modules...

No, but as a search of this forum will show is that PCI(e) passthrough and hotplug of PCI(e) (like Thunderbolt) is problematic. I just wanted to correct the difference between IOMMU groups and PCI IDs. And to inform you want PCI IDs are determined by the motherboard. Please contact your...

Thank you, this seems to work: # cat /etc/modprobe.d/vfio.conf options vfio-pci ids=1022:15c1,1022:1669 disable_idle_d3=1 softdep xhci_pci pre: vfio-pci softdep xhci_hcd pre: vfio-pci blacklist thunderbolt Here is the kernel driver state: c9:00.0 1300: 1022:14ec Subsystem: 1022:14ec...

I have a Asus NUC 15 PRO and a QNAP QNA-UC10G1SF USB/TB4 10G SFP NIC. I can get it up and running after a hot-plug and subsequent warm reboot, but it won't come up when already plugged in on a coldboot. I have tried on the 6.8 kernel from Prox8 and the 6.14.8-2 kernel from Prox9. My buddy...

Thunderbold ist nicht das Problem, da funktioniert bei mir auch alles einwandfrei dran. Könntest du bitte die Bezeichnung der beiden internen 2242 und 2280 M.2 NVMEs hier posten die bei dir zusammen im Gerät laufen, Danke.

Hello all, I have an Intel NUC with a Thunderbgolt 3 port on the back. I have connected this to a Sabrent 2 bay NVMe external enclosure. The Sabrent enclosure has two 1TB NVMe drives in it. I have installed bolt and thunderbolt-tools via APT. When running boltctl list I get the following...

Ich habe ein RNUC14RVKU7 im Einsatz, hatte testweise über Thunderbolt sogar 3 NVMe-Disks angehängt (da dürfte es aber tatsächlich mit den PCIe-Lanes irgendwie komisch werden, die lspci-Angaben waren eigenartig bzgl. der Bandbreite für die Thunderbolt-Enclosure). Jedenfalls waren alle drei Disks...

Hello, I have a system with Ryzen 8845HS and the following IOMMU groups: ...

Ok I was able to figure out the issue. The thunderbolt interface.d configuration was the culprit. The old config did not seem to want to work with 9. Checking the page I got the instructions from https://gist.github.com/scyto/58b5cd9a18e1f5846048aabd4b152564 it seems to be updated and has a new...

I have 3 Minisforum MS-01 hosts running PVE 8.4.14, with Ceph running on Thunderbolt links between the nodes. I went ahead with the 8 to 9 upgrade following the docs https://pve.proxmox.com/wiki/Upgrade_from_8_to_9. Starting with the first host, I went through the process but upon reboot, it...

This is the device --> Ugreen DXP 8800 plus lspci: root@pve03:~# lspci -t -v -[0000:00]-+-00.0 Intel Corporation Alder Lake-U15 Host and DRAM Controller +-02.0 Intel Corporation Alder Lake-UP3 GT2 [Iris Xe Graphics] +-06.0-[01]----00.0 Samsung Electronics Co Ltd NVMe...

I´m just getting started, so I´m far from a final verdict. It is looking good though. All the basics worked fine without requiring me to jump through any hoops, including PCIe passthrough for one GPU and one USB controller. IOMMU isolation is some of the best I´ve seen on a non-server...

Interesting. This article has some scripting for automatic thunderbolt detection, but your solution looks a lot simpler though... https://gist.github.com/taslabs-net/9da77d302adb9fc3f10942d81f700a05

I finally figured out what was causing my problems with Thunderbolt SSDs not being available as mountable devices, despite being enrolled via 'boltctl' (see my prior reply). Apparently, the PCI bus is not being scanned properly on bootup or when Thunderbolt connection events occur. This ArchWiki...

Thanks for sharing your experience and pointing out the "boltctl authorize" command. I have a similar problem with a Mac Mini server 2018, but with the OWC Envoy Pro FX SSDs. I have used both the "boltctl authorize" and "boltctl enroll" commands after installing the "bolt" and...

thanks. just want you to know that this was a PEBCAK situation. this machine doesn't actually have USB4, it just looks like it does. ‍

If you already have the correct kernel version and ASPM settings applied, try the following: # apt install bolt Then use `boltctl list` to verify that the device is recognized. For example: # boltctl list ○ IOCREST 40Gbps ├─ type: peripheral ├─ name: 40Gbps ├─...

it got me part of the way there, but https://www.reddit.com/r/Proxmox/comments/1azwc2l/thunderbolt_drivers_for_proxmox_8_linux_65118/ it seems like a lot of things are missing? installing thunderbolt-utils only got me one executable instead of the whole suite of tools.

Here’s the output. The CPU is one of these new integrated CPUs with GPU, CPU, NPU in one. Pretty nifty for a small NAS, because it allows to run small local LLMs e.g. for use in NextCloud. root@pve:~# lspci -nnk 00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Strix/Strix Halo...