Search results for query: Thunderbolt 6.8

Good morning, for the past couple of months, I get these firewall crashes and it completely crashes my proxmox instance. It never happened initially and had no crashes for ages. However now its rare to get more than 48 hours of up-time. Any advice on what can be causing this? I am running...

Hi, yep, look here

Hello, I have just started exploring Proxmox. I had an Asus NUC 14 Pro that was not currently in use, so I installed Proxmox and a few VMs on it. Everything works fine as long as I don't run the PC headless. When it runs with a monitor and keyboard, everything is OK. If I start it without a...

Method 2: Authorization via udev rules (without Polkit) If you don't want to install unnecessary graphics dependencies on the server, you can force the system to automatically authorize all Thunderbolt/USB4 devices: Create a rules file: nano /etc/udev/rules.d/99-local.rules Add a line that will...

did anyone sucessfully try to passthrough thunderbolt 4 external GPU?

Hi everyone! I just wanted to write a guide for those (like myself) trying out GPU passthrough with the HP ProDesk 600 G1 in 2025... I needed to enable VT-d using the "Replicated setup" method (previously mentioned here) in the UEFI/BIOS as the VT-d option was not present in the menus (GUI)...

结论：i226V网口没有问题，即便是换了外置USB网口，换了外置雷电网口，反复插拔网线（次数不确定，10次，20次，30次），也会导致PVE彻底失联，除非重启PVE，否则永久失联。 Conclusion: The i226V network port is not the problem. Even after replacing it with an external USB network adapter or an external Thunderbolt network adapter, and repeatedly plugging and unplugging the...

It does work in windows 11 correct , but it's a can't win case in Linux/promox , you can't pass it to a windows 11 VM because the USB 4 is part of the chip set driver which will not install , but in proxmox it will see USB 4 as USB hi-speed , The thunderbolt 5 is seen as thunderbolt 2 . But the...

I'll check for the modules and blacklist later..

I have those installed, but as I said, the bolt command fails to detect my thunderbolt dock or the graphics card installed. The same dock works on a Windows laptop with thunderbolt 4 and if I use the Oculink port for a PCI connection. It's all very strange.

Did you do it like that? apt install boltctl apt install polkitd apt install pkexec boltctl list -a boltctl enroll <UUID> lspci -nn | grep -e 'NVIDIA'

How did you get thunderolt to authorize, whatever 'bolt' command I use, returns nothing, and I never get the device file /sys/bus/thunderbolt/devices populated. Can you post you modules and blacklists.?

Hi Derek, I solved it with installing and authorizing Thunderbold on Proxmox and then passing through the gpu to the vm (not the thunderbolt controller).

Hello, I am trying to run a similar setup with my UM790 pro and AG02, but in this case with a RX 9060XT. But I am not able to have it running. The UM 790 Pro has BOS 1.09. When I connect the AOOSTAR, it stays connected for few seconds and then disconnects: Dec 11 22:34:03 pve kernel...

Hey, I am researching using eGPU dock and stumbled upon your info. Thanks a lot! While researching I found some lockups that are similar, but for Nvidia. Maybe you could try pci=noaer as they outline here: https://github.com/NVIDIA/open-gpu-kernel-modules/pull/981#issuecomment-3621315260. and...

I'll leave that too. And this is what the IOMMU groups look like for me root@node2:~# pvesh get /nodes/node2/hardware/pci --pci-class-blacklist ""...

I just bought a mini pc, the pulcro.io turnkey two, which is based on intel N150 and comes with dual 2.5g I226-V (rev 04) network interfaces. it comes with proxmox already installed (9.06) and I just updated via apt update and now it has 9.1.1. I am not sure, but I believe that after the update...

hello i have a minfourm n5 ， pve with' windows vm ， egpu 4070tis passthrough thunderbolt when i run 3dmark time spy ，the windows has interal error and system stoped please help ，how i can fix the problem thankyou' here are some log Nov 26 15:06:07 pve kernel: pcieport 0000:08:01.0: PCIe Bus...

Trying to set up a fast way to move file from my Laptop to my MS-S1 MAX using a nvme usb4 adapter. But if I plug into a USB4 plug looking at the logs it keep restarting and doesn't work , but it in a USB3-10GB port it works and say it is USB2 device and runs at 40MB/S , I installed ( apt install...

Hello everyone,My Windows virtual machine isn't running smoothly, and I'd appreciate your help troubleshooting. Thank you in advance. (Note: My English isn't very strong; this post has been translated.) 1. Hardware Overview Device: Minisforum N5 CPU: AMD Ryzen 7 255 RAM: DDR5 64GB Storage...