Raid1 boot array, drive replacement procedure

B

buckweet1980

New Member
Mar 27, 2024
4
0
1
I'm looking to do a btrfs raid1 boot array, which can be done via the installation, but how in the world do you replace a drive?

Can someone direct me in HOW to replace a failed drive? I've searched and searched with no real answer. The challenge I'm running into is there's no way that I can find to rebuild the mirror once it's degraded.

I've added the rootflags for degraded state, along with the RW flag too into grub. But if you boot from one drive (because a drive has failed for example), it boots into read only state and you can't modify the btrfs mirror..


So how does one do this? Do we have to boot in a live media scenario? Is there a way to get the filesystem mounted in RW so you can make modifications with the Proxmox install?

It's surprising that this isn't documented, at least I can't find any solutions. I'm open to ZFS, but being that these are SSDs, I read that btrfs would be a better approach?

Not sure where to go from here...
 
buckweet1980 said:
It's surprising that this isn't documented, at least I can't find any solutions. I'm open to ZFS, but being that these are SSDs, I read that btrfs would be a better approach?
Click to expand...

https://pve.proxmox.com/wiki/BTRFS

BTRFS integration is currently a technology preview in Proxmox VE.

If you can use the preview feature, feel free to do so. However, if you cannot handle it yourself (requiring documentation or support), it should not be an option.
Furthermore, there is no basis for claiming Btrfs is superior simply because it's an SSD.

You can start using it by creating a new mirror, removing one drive, adding a new disk, and testing the replacement method.

https://docs.oracle.com/en/operatin...admin/fsadmin-ManagingtheBtrfsFileSystem.html

You say you can't find it, but I think if you look, you'll find similar threads. Isn't it strange to ask for documentation for a feature that isn't officially supported?
 
Last edited:
  • Like
Reactions: Johannes S
uzumo said:
https://pve.proxmox.com/wiki/BTRFS

BTRFS integration is currently a technology preview in Proxmox VE.

If you can use the preview feature, feel free to do so. However, if you cannot handle it yourself (requiring documentation or support), it should not be an option.
Furthermore, there is no basis for claiming Btrfs is superior simply because it's an SSD.

You can start using it by creating a new mirror, removing one drive, adding a new disk, and testing the replacement method.

https://docs.oracle.com/en/operatin...admin/fsadmin-ManagingtheBtrfsFileSystem.html
Click to expand...
As I stated in my opening post, you can't modify anything because it will only mount it as a read-only filesystem since it's in a degraded state.
 
  • Like
Reactions: UdoB
You must log in or register to reply here.
Top Bottom
Back