Rename PVE node and loose nic

[Goti]

Hi,

Follow this procedure https://pve.proxmox.com/wiki/Renaming_a_PVE_node I change my name and I loose all my nic, they are detected but they stay down, no light on port.
I rename with original name and everything come back.

My pve is pretty clean, I ran only this after install https://community-scripts.github.io/ProxmoxVE/scripts?id=post-pve-install.

Any idea?

 

[lucavornheder]

do ethtool detect a link on the ports?

 

[Goti]

I have answer but link detected: no

 

[lucavornheder]

can you find any error regarding networking in the output of dmesg?

 

[Goti]

I copy everything I found around the nic

Apr 25 12:41:44 pequod kernel: Intel(R) 2.5G Ethernet Linux Driver
Apr 25 12:41:44 pequod kernel: Copyright(c) 2018 Intel Corporation.
Apr 25 12:41:44 pequod kernel: igc 0000:02:00.0: enabling device (0000 -> 0002)
Apr 25 12:41:44 pequod kernel: igc 0000:02:00.0: PTM enabled, 4ns granularity
Apr 25 12:41:44 pequod kernel: i2c i2c-0: 1/2 memory slots populated (from DMI)
Apr 25 12:41:44 pequod kernel: i2c i2c-0: Memory type 0x22 not supported yet, not instantiating SPD
Apr 25 12:41:44 pequod kernel: pps pps0: new PPS source ptp0
Apr 25 12:41:44 pequod kernel: igc 0000:02:00.0 (unnamed net_device) (uninitialized): PHC added
Apr 25 12:41:44 pequod kernel: igc 0000:02:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x1 link)
Apr 25 12:41:44 pequod kernel: igc 0000:02:00.0 eth0: MAC: a8:b8:e0:02:b0:55
Apr 25 12:41:44 pequod kernel: igc 0000:03:00.0: enabling device (0000 -> 0002)
Apr 25 12:41:44 pequod kernel: igc 0000:03:00.0: PTM enabled, 4ns granularity
Apr 25 12:41:44 pequod kernel: pps pps1: new PPS source ptp1
Apr 25 12:41:44 pequod kernel: igc 0000:03:00.0 (unnamed net_device) (uninitialized): PHC added
Apr 25 12:41:44 pequod kernel: igc 0000:03:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x1 link)
Apr 25 12:41:44 pequod kernel: igc 0000:03:00.0 eth1: MAC: a8:b8:e0:02:b0:56
Apr 25 12:41:44 pequod kernel: igc 0000:04:00.0: enabling device (0000 -> 0002)
Apr 25 12:41:44 pequod kernel: igc 0000:04:00.0: PTM enabled, 4ns granularity
Apr 25 12:41:44 pequod kernel: pps pps2: new PPS source ptp2
Apr 25 12:41:44 pequod kernel: igc 0000:04:00.0 (unnamed net_device) (uninitialized): PHC added
Apr 25 12:41:44 pequod kernel: igc 0000:04:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x1 link)
Apr 25 12:41:44 pequod kernel: igc 0000:04:00.0 eth2: MAC: a8:b8:e0:02:b0:57
Apr 25 12:41:44 pequod kernel: igc 0000:05:00.0: enabling device (0000 -> 0002)
Apr 25 12:41:44 pequod kernel: igc 0000:05:00.0: PTM enabled, 4ns granularity
Apr 25 12:41:44 pequod kernel: pps pps3: new PPS source ptp3
Apr 25 12:41:44 pequod kernel: igc 0000:05:00.0 (unnamed net_device) (uninitialized): PHC added
Apr 25 12:41:44 pequod kernel: igc 0000:05:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x1 link)
Apr 25 12:41:44 pequod kernel: igc 0000:05:00.0 eth3: MAC: a8:b8:e0:02:b0:58



Apr 25 12:41:49 pequod kernel: vmbr0: port 1(enp2s0) entered blocking state
Apr 25 12:41:49 pequod kernel: vmbr0: port 1(enp2s0) entered disabled state
Apr 25 12:41:49 pequod kernel: igc 0000:02:00.0 enp2s0: entered allmulticast mode
Apr 25 12:41:49 pequod kernel: igc 0000:02:00.0 enp2s0: entered promiscuous mode
Apr 25 12:41:49 pequod systemd[1]: Finished networking.service - Network initialization.
Apr 25 12:41:49 pequod systemd[1]: Reached target network.target - Network.
Apr 25 12:41:49 pequod systemd[1]: Reached target network-online.target - Network is Online.

Apr 25 12:41:49 pequod pmxcfs[866]: [main] notice: resolved node name 'pequod' to '10.3.1.1' for default node IP address
Apr 25 12:41:49 pequod pmxcfs[866]: [main] notice: resolved node name 'pequod' to '10.3.1.1' for default node IP address