I am using PVE 8.2.9 cluster within two MS1 boxes.
I am new at Proxmox.
The issue is Network refuse to work with 10Gb copper SFP
Any help, guidance will be very appreciated
Here is my network interfaces config:
...
auto enp2s0f1np1
iface enp2s0f1np1 inet manual
auto vmbr1
iface vmbr1 inet static
address 10.10.10.3/24
bridge-ports enp2s0f1np1
bridge-stp off
bridge-fd 0
...
Looking at ip link:
...
5: enp2s0f1np1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq master vmbr1 state DOWN mode DEFAULT group default qlen 1000
link/ether 58:47:ca:76:99:9c brd ff:ff:ff:ff:ff:ff
...
9: vmbr1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000
link/ether 58:47:ca:76:99:9c brd ff:ff:ff:ff:ff:ff
...
all are DOWN
Looking at pci:
root@pve01:~# lspci -k | sed -n '/Ethernet/,/driver in use/p'
02:00.0 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ (rev 02)
Subsystem: Intel Corporation Ethernet Converged Network Adapter X710
Kernel driver in use: i40e
02:00.1 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ (rev 02)
Subsystem: Intel Corporation Ethernet Converged Network Adapter X710
Kernel driver in use: i40e
...
Looking at dmesg for i40e driver:
root@pve01:~# dmesg | grep i40e
[ 0.947970] i40e: Intel(R) Ethernet Connection XL710 Network Driver
[ 0.947972] i40e: Copyright (c) 2013 - 2019 Intel Corporation.
[ 0.947996] i40e 0000:02:00.0: enabling device (0000 -> 0002)
[ 0.961180] i40e 0000:02:00.0: fw 9.120.73026 api 1.15 nvm 9.20 0x8000d8c5 0.0.0 [8086:1572] [8086:0000]
[ 1.217513] i40e 0000:02:00.0: MAC address: 58:47:ca:76:99:9b
[ 1.217751] i40e 0000:02:00.0: FW LLDP is enabled
[ 1.222043] i40e 0000:02:00.0: PCI-Express: Speed 8.0GT/s Width x4
[ 1.222045] i40e 0000:02:00.0: PCI-Express bandwidth available for this device may be insufficient for optimal performance.
[ 1.222045] i40e 0000:02:00.0: Please move the device to a different PCI-e link with more lanes and/or higher transfer rate.
[ 1.222493] i40e 0000:02:00.0: Features: PF-id[0] VFs: 64 VSIs: 66 QP: 20 RSS FD_ATR FD_SB NTUPLE DCB VxLAN Geneve PTP VEPA
[ 1.222508] i40e 0000:02:00.1: enabling device (0000 -> 0002)
[ 1.235247] i40e 0000:02:00.1: fw 9.120.73026 api 1.15 nvm 9.20 0x8000d8c5 0.0.0 [8086:1572] [8086:0000]
[ 1.491902] i40e 0000:02:00.1: MAC address: 58:47:ca:76:99:9c
[ 1.492137] i40e 0000:02:00.1: FW LLDP is enabled
[ 1.496231] i40e 0000:02:00.1: PCI-Express: Speed 8.0GT/s Width x4
[ 1.496232] i40e 0000:02:00.1: PCI-Express bandwidth available for this device may be insufficient for optimal performance.
[ 1.496232] i40e 0000:02:00.1: Please move the device to a different PCI-e link with more lanes and/or higher transfer rate.
[ 1.496681] i40e 0000:02:00.1: Features: PF-id[1] VFs: 64 VSIs: 66 QP: 20 RSS FD_ATR FD_SB NTUPLE DCB VxLAN Geneve PTP VEPA
[ 1.511451] i40e 0000:02:00.1 enp2s0f1np1: renamed from eth1
[ 1.524431] i40e 0000:02:00.0 enp2s0f0np0: renamed from eth0
[73196.398723] i40e 0000:02:00.0 enp2s0f0np0: NIC Link is Up, 10 Gbps Full Duplex, Flow Control: None
[75927.833207] i40e 0000:02:00.0 enp2s0f0np0: NIC Link is Down
[77987.210760] i40e 0000:02:00.0 enp2s0f0np0: NIC Link is Up, 10 Gbps Full Duplex, Flow Control: None
[78600.936772] i40e 0000:02:00.1 enp2s0f1np1: entered allmulticast mode
[78600.936821] i40e 0000:02:00.1 enp2s0f1np1: entered promiscuous mode
[78600.939775] i40e 0000:02:00.1: entering allmulti mode.
looking at ethtool 10Gbe SFP:
root@pve01:~# ethtool enp2s0f1np1
Settings for enp2s0f1np1:
Supported ports: [ ]
Supported link modes: 10000baseT/Full
1000baseX/Full
10000baseSR/Full
10000baseLR/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10000baseT/Full
1000baseX/Full
10000baseSR/Full
10000baseLR/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Unknown! (255)
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Supports Wake-on: g
Wake-on: g
Current message level: 0x00000007 (7)
drv probe link
Link detected: no
No error at all but working. I exhausted all my Linux knowledge on that subject.
I also tried other SFP+ from FS but same issue, no link
Thanks in advance.
I am new at Proxmox.
The issue is Network refuse to work with 10Gb copper SFP
Any help, guidance will be very appreciated
Here is my network interfaces config:
...
auto enp2s0f1np1
iface enp2s0f1np1 inet manual
auto vmbr1
iface vmbr1 inet static
address 10.10.10.3/24
bridge-ports enp2s0f1np1
bridge-stp off
bridge-fd 0
...
Looking at ip link:
...
5: enp2s0f1np1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq master vmbr1 state DOWN mode DEFAULT group default qlen 1000
link/ether 58:47:ca:76:99:9c brd ff:ff:ff:ff:ff:ff
...
9: vmbr1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000
link/ether 58:47:ca:76:99:9c brd ff:ff:ff:ff:ff:ff
...
all are DOWN
Looking at pci:
root@pve01:~# lspci -k | sed -n '/Ethernet/,/driver in use/p'
02:00.0 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ (rev 02)
Subsystem: Intel Corporation Ethernet Converged Network Adapter X710
Kernel driver in use: i40e
02:00.1 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ (rev 02)
Subsystem: Intel Corporation Ethernet Converged Network Adapter X710
Kernel driver in use: i40e
...
Looking at dmesg for i40e driver:
root@pve01:~# dmesg | grep i40e
[ 0.947970] i40e: Intel(R) Ethernet Connection XL710 Network Driver
[ 0.947972] i40e: Copyright (c) 2013 - 2019 Intel Corporation.
[ 0.947996] i40e 0000:02:00.0: enabling device (0000 -> 0002)
[ 0.961180] i40e 0000:02:00.0: fw 9.120.73026 api 1.15 nvm 9.20 0x8000d8c5 0.0.0 [8086:1572] [8086:0000]
[ 1.217513] i40e 0000:02:00.0: MAC address: 58:47:ca:76:99:9b
[ 1.217751] i40e 0000:02:00.0: FW LLDP is enabled
[ 1.222043] i40e 0000:02:00.0: PCI-Express: Speed 8.0GT/s Width x4
[ 1.222045] i40e 0000:02:00.0: PCI-Express bandwidth available for this device may be insufficient for optimal performance.
[ 1.222045] i40e 0000:02:00.0: Please move the device to a different PCI-e link with more lanes and/or higher transfer rate.
[ 1.222493] i40e 0000:02:00.0: Features: PF-id[0] VFs: 64 VSIs: 66 QP: 20 RSS FD_ATR FD_SB NTUPLE DCB VxLAN Geneve PTP VEPA
[ 1.222508] i40e 0000:02:00.1: enabling device (0000 -> 0002)
[ 1.235247] i40e 0000:02:00.1: fw 9.120.73026 api 1.15 nvm 9.20 0x8000d8c5 0.0.0 [8086:1572] [8086:0000]
[ 1.491902] i40e 0000:02:00.1: MAC address: 58:47:ca:76:99:9c
[ 1.492137] i40e 0000:02:00.1: FW LLDP is enabled
[ 1.496231] i40e 0000:02:00.1: PCI-Express: Speed 8.0GT/s Width x4
[ 1.496232] i40e 0000:02:00.1: PCI-Express bandwidth available for this device may be insufficient for optimal performance.
[ 1.496232] i40e 0000:02:00.1: Please move the device to a different PCI-e link with more lanes and/or higher transfer rate.
[ 1.496681] i40e 0000:02:00.1: Features: PF-id[1] VFs: 64 VSIs: 66 QP: 20 RSS FD_ATR FD_SB NTUPLE DCB VxLAN Geneve PTP VEPA
[ 1.511451] i40e 0000:02:00.1 enp2s0f1np1: renamed from eth1
[ 1.524431] i40e 0000:02:00.0 enp2s0f0np0: renamed from eth0
[73196.398723] i40e 0000:02:00.0 enp2s0f0np0: NIC Link is Up, 10 Gbps Full Duplex, Flow Control: None
[75927.833207] i40e 0000:02:00.0 enp2s0f0np0: NIC Link is Down
[77987.210760] i40e 0000:02:00.0 enp2s0f0np0: NIC Link is Up, 10 Gbps Full Duplex, Flow Control: None
[78600.936772] i40e 0000:02:00.1 enp2s0f1np1: entered allmulticast mode
[78600.936821] i40e 0000:02:00.1 enp2s0f1np1: entered promiscuous mode
[78600.939775] i40e 0000:02:00.1: entering allmulti mode.
looking at ethtool 10Gbe SFP:
root@pve01:~# ethtool enp2s0f1np1
Settings for enp2s0f1np1:
Supported ports: [ ]
Supported link modes: 10000baseT/Full
1000baseX/Full
10000baseSR/Full
10000baseLR/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10000baseT/Full
1000baseX/Full
10000baseSR/Full
10000baseLR/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Unknown! (255)
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Supports Wake-on: g
Wake-on: g
Current message level: 0x00000007 (7)
drv probe link
Link detected: no
No error at all but working. I exhausted all my Linux knowledge on that subject.
I also tried other SFP+ from FS but same issue, no link
Thanks in advance.
