Recent content by yakakliker

When the cluster is "down", are the proxmox services restart well ? ( service pve-cluster restart, service pvedaemon restart, service pvestatd restart and service pveproxy restart ? )

Tested : OK Before, you must control datacenter.cfg version. # man datacenter.cfg must give you : migration: [type=]<secure|insecure> [,network=<CIDR>] For cluster wide migration settings. after, you must connect all cluster node to all cluster node to validate certificates.

Thanks very much

Hello all, I saw on the wiki ( http://pve.proxmox.com/pve-docs/pve-admin-guide.html#_configuration_files_2 ) that i can configure network migration : migration: [type=]<secure|insecure> [,network=<CIDR>] migration: type=insecure, network=10.10.10.0/24 is it good ?

This card had QLogic 57810S chipset like my Broadcom ethernet cards A driver problem ?

It is this one : http://accessories.us.dell.com/sna/productdetail.aspx?c=ca&l=en&s=&cs=cadhs1&sku=540-BBGU&dgc=SS&cid=289985&lid=5562091&acd=12308215244274933c60898094

After more tests, the hangs come from the 10Gb ethernet card. With Broadcom 10Gb : No shutdown Without : Shutdown OK

ps -Af during shutdown : root 3285 1 0 11:27 ? 00:00:00 /bin/sh -e /etc/init.d/networking stop root 3288 3285 0 11:27 ? 00:00:00 ifdown -a --exclude=lo root 3318 3288 0 11:27 ? 00:00:00 /bin/sh -c run-parts /etc/network/if-post-down.d root 3319 3318 0 11:27 ? 00:00:00 run-parts...

Re, re, Shutdown NOK after network configuration on Proxmox 4.2 iso install. The network conf : iface eth0 inet manual iface eth1 inet manual iface eth2 inet manual iface eth3 inet manual iface eth4 inet manual iface eth5 inet manual auto vmbr0 iface vmbr0 inet static address...

Re, After more tests : Install from Proxmox 4.2 iso + dist-upgrade >> Shutdown OK with 4.4 kernel Install from Proxmox 4.1 iso + dist-upgrade >> Shutdown NOK with 4.4 Kernel

And the 1Gb ethernet cards : Ethernet controller: Broadcom Corporation NetXtreme BCM5720 Gigabit Ethernet PCIe

The network cards : Ethernet controller: Broadcom Corporation NetXtreme II BCM57810 10 Gigabit Ethernet (rev 10) Interfaces file : auto lo iface lo inet loopback iface eth0 inet manual iface eth1 inet manual iface eth2 inet manual iface eth3 inet manual iface eth4 inet manual iface eth5...

Hello, I've got 2 Dell R730 with 2 10Gb network cards. I just noticed that after 4.4.x kernel upgrade, the server can't reboot. I have "A start job is running for LSB: Raise network interfaces. (15min 10s / no limit)" blocking message during the shutdown serveur. Has someone already experience...