Ja mache ich auch so. Also das geht. Aber was mir mehr Sorgen macht ist die Mischung und den Betrieb von Festplatten mit unterschiedlichen Partitionen und Größen, und dass es nicht auf allen Festplatten die Boot-Partitionen gibt.
Hätte dieser Weg hier nicht funktioniert?
zpool export Datengrab
zpool import -d /dev/disk/by-id Datengrab
Eventuell halt davor den Speicher in PVE deaktivieren und alle Gäste stoppen.
Changing this setting is only for troubleshooting, not for running in production, even in a homelab. Seriously if you don't need a cluster or don't have the Hardware for it: Don't cluster. You will only make your life harder without any benefit
Hi Ripon,
there can be multiple reasons für this kind of behaviour and the root cause can also be caused by the Hypervisor/ Host.
The described behaviour could probably point to a out of memory situation (especially with only 16GB RAM). You...
Genau dabei helfen Diskussionen wie diese hier. Bleiben wir mal bei Proxmox dann können wir festlegen, dass die Modelle zu einem maßgeblichen Anteil durch eben dieses Forum hier befüttert werden.
Daher ist es nicht nur in unserem, sondern...
Well, the usual reasons against ZFS are a) some higher wearout = the SSD won't last as long as with LVM/ext4 and b) slower performance because of more write-activity. (And no PLP which would allow delaying the actual write...)
The required...
@katti
Depending on your requirements on a how long the services can be unavailable and on how much fresh data can be lost, a workaround could be frequent backups to PBS. And restoring to the other cluster when needed).
Thanks to "dirty bitmaps"...
"KI" (es gibt bisher keine künstliche Intelligenz! Es gibt nur Sprachmodelle.) ist gekommen um zu bleiben. Eine Kennzeichnungspflicht erscheint plausibel, ist aber weder mittel- noch langfristig durchsetzbar und vor allem nicht wirklich...
Ich bitte um eine Diskussion/RFC zu o.g. Thematik.
Mittlerweile nehmen die Beiträge welche erkenn- und nachweisbar zu nahezu ausschließlich KI-Content bestehen massiv überhand. Besteht die Möglichkeit dies einzuschränken und/oder eine...
No, it still doesn't make sense. Proxmox is somehow supposed to know if this was an "intended" shutdown rather than a VM crash, and do something different in that case. And you want "on demand" machines to have high availability? What the heck...
As my predecessors have already said, your configuration is trying to use the port enp3s0, which no longer exists. You still have enp7s0 and enp8s0. These are down because they do not appear in any network configuration.
Either your power outage...
In the first screenshot we see enp7s0 and enp8s0 - being "DOWN", please check the actual cables and the LED on the other end of the cable.
In the second screenshot we see you've configured enp3s0. Different names --> it can not work...
Hi @ajpion , welcome to the forum.
The system (Linux or Windows) allows for one default gateway. Any gateway beyond default one are not default by definition and need to be scoped for a particular subnet) destination.
If your client and storage...
Hi Jonas,
after mentioned update (dist-upgrade, not cherry picking that one) network settings are back to "yes/no" and OSD flags have checkboxes.
I had and have no console issues at all.
Linux guests only, most of them using BIOS and a few...