Yeah, system logs are hard to read most of the time. There is no error listed.
Maybe there has been a non-logged event? For example a power fail would not get logged, because... there is no power.
Do you see a problem in the way it is presented?
Or is ARC using too much memory for your use case? You can adjust it: https://pve.proxmox.com/wiki/ZFS_on_Linux#sysadmin_zfs_limit_memory_usage
Basically NOT used Ram is wasted Ram. And ARC is...
Ich habe einfach zunächst die dritte SSD wie in https://pve.proxmox.com/pve-docs/pve-admin-guide.html#sysadmin_zfs_change_failed_dev beschrieben angeklebt.
Nach diesem ersten Zwischenschritt (vor dem Wiederholen mit dem vierten Device) hat man...
The first thing is to look into the journal: journalctl -b -1 -e = show the end (-e) of the previous (-1) boot.
Good luck then. Learning by doing is fine! Just try to understand what you are doing... ;-)
Sorry, I misunderstood. In that case you can leave it.
Sure. So Proxmox uses the good default of 16k volblocksize.
That means that all your VMs ZFS raw disks, are offered 16k blocks.
Now lets look how ZFS provides 16k blocks.
You have RAIDZ1...
Nonsense. Displaying and alerting on (if a temperature gets higher than a set treshhold ) Temperature is one part of monitoring as well as displaying and alerting on CPU load, RAM or storage usage. And the funny thing is if you don't want to get...
Die haben auch eine eigene Wikiseite im Proxmoxwiki: https://pve.proxmox.com/wiki/Zram#Alternative_Setup_using_zram-tools
Und wären generell auch meine Empfehlung, auch wenn man natürlich keine Wunder erwarten sollte. Sie kosten dabei aber auch...
Dieser Standardwert ist auch nicht mehr unbedingt 50%: Zum einen weil seit PVE 8.4 ( oder früher, aber irgendwann zu einer PVE8-Version) der Intaller von ProxmoxVE bei der Installation den ARC -Cache auf 10% (und maximal 16GB) des zu dem...
Das Backup sollte IMMER außerhalb der Produktionshardware sein nach der 3-2-1-Regel:
Drei Kopien, davon zwei auf verschiedenen Medien, eine davon an einen anderen Standort (Cloud, Freund, Familienmitglied).
Siehe auch...
Obviously, I meant "not in a sensible way" - at least for what the OP asked for, namely to increase his storage from 2x the size of one of his physical disks, so using 5 disks either does not use one of them, thus not increasing the net size...
A raid mirror usually has the read and write performance of a single disk (for a single thread - it can perform better with more threads if the data is distributed over more than one disk per mirror side). A raidz1 can perform much better on...
Of course I know that you (and most users here in the forum) know the facts, but this sentence:
calls for "Mr. Obvious", stating "yes, you can!" ;-)
root@pnz:~# zpool create multimirror mirror sdc sdd sde sdf sdg
root@pnz:~# zpool status...
From all of my own experience: yes!
How large the effect is depends on your actual use case, of course. Writing (and reading) the actual data may be (nearly) as slow as before - but the meta data can be read and written much, much faster than...
There is some documentation available for Corosync network setup: https://pve.proxmox.com/wiki/Cluster_Manager#pvecm_cluster_network
Using bonds is not advised, shared links with other traffic types are not advised too.
Try something else than Ventoy (as it is also know to cause problems) to create the USB: https://pve.proxmox.com/pve-docs/pve-admin-guide.html#installation_prepare_media