Hello @ilu, welcome to the club.
You might just follow https://pve.proxmox.com/pve-docs/pve-admin-guide.html#chapter_installation
If you encounter problems try to describe your hardware more detailed. Then tell us
what you wanted to do (in...
there are multiple post in this forum, that discourage the use of docker inside an LXC.
Personally, I run HA as Docker container (among others) in a VM, MQTT „native“ in an LXC and Zigbee2MQTT as a container on a Raspberry Pi, having the USB...
Hey these are valid questions, but they are very basic.
So pardon the instruction session ...
Read Intensive drives will burn out more quickly. In some cases A LOT more quickly.
You want MU ... Mixed Use.
They make Write Intensive drives priced...
You can connect a usb Keyboard to your mini-PC, then you can use root with the password (you gave at installation period) to login this system. if you want to modify the firewall setting, ex. disable cluster firewall temporally, then you can...
Because in above logs.txt, first time reboot is issued by shutdown command, and the system restart at Mar 27 14:38:10, running until Mar 28 15:17:01 unexpected reboot ( in the log does no have obvious event point to the cause), the system has...
Anscheinend kennst du ja die Grundlagen von Corosync schon etwas.
Jeder Cluster auf dieser Welt, auch bei MS, braucht eine ungerade Anzahl an Knoten oder ein Quorum.
Wenn kein Quorum da ist, ist das Verhalten vollkommen richtig und gewollt. Mit...
Hi @cypher25 , welcome to the forum.
Please note that PVE "shared" attribute only tells the PVE that you made that particular storage pool presentable to all nodes in the cluster. The attribute does NOT share the storage.
You have to connect...
Hi all
disclaimer: I work for Fujitsu, this is a semi-official posting but I hope it is not considered as advertising. ;)
I found a couple of discussions in this forum around recommended hardware and components for Primergy servers, so maybe...
Hi,
I was getting the same issue with the 6.8 kernel and my 'AsRock Rack EP2C602-4L/D16'.
The solution was upgrading the firmware of the controller that was causing the problem:
Marvell SE9230
Instructions on the ASRock site...
1. Usage Estimates
This confused me at first, but right now the sustainability metric is located not on your datastore instance, but in the parent Datastore section summary:
One of the best ways to determine how accurate that measure is will be...
Please note, this is not a good setup if you expect reasonable performance.
Please use the sync jobs for this [0], otherwise you will run into issues sooner or later, as your rsync will not see a consistent state if you have concurrent actions...
Yes! As soon as it is added to the cluster as a member it gets one vote :)
The resources it does offer may be completely different in regards of Ram/Cpu/Disk-number/Disk-space etc. Theses technical differences will hinder migration if they do...
Wenn du ARM Software laufen lassen willst, solltest du am besten ein ARM Device wie RasPi nutzen. Eine Emulation einer anderen Architektur ist immer extrem langsam.
Yes, you can ignore the 4th node for HA purposes. But that is not the problem! PVE needs Quorum to be established to work as intended. Without Quorum you can not administrate a cluster. This fact is completely independent from activating HA or...
You need at least 3 nodes, but you can attach more als you like.
Enterprise SSDs with *real* Power Loss Protection is a must-have ! For Example Micron 7400 or Samsung pm9a3. PLP is important for latency - non PLp drives will have a latency...
One advantage of Ceph is its flexibility. The goal of my "FabU" was to mention some aspects and pitfalls. Not more.
That "38" is the sum of Ram of my example in the cluster. My point was that each and every daemon - be it OSD/MON/MGR or MDS -...
Hallo
danke für die Antwort
Ich hab einen kleinen Thin Client und damit nur 1 fest verbaute Festplatte. Diese will ich zur Hälfte für Proxmox benutzen und die andere Hälfte so einrichten, dass ich darauf z. B. Bilder oder ähnliches Speichen...