Recent content by testcb00

Hi everyone, I find that the Proxmox VE Host Console will make numlock off in the boot process. Is it possible to make the Numlock on at boot?

Hi, Dunuin. I would like to know more about it. I am planning to use a 4-Port Intel XL710 10GbE SFP+ PCIe NIC as my 1U server NIC. I will passthrough 2 Port to pfSense VM, one Port to TrueNAS VM and one Port as SR-IOV PF for other Linux VM. Both the 4 Port of XL710 will connect to a 10GbE...

Hi everyone, sorry for my English. I spend time to test between ESXi and Proxmox VE and finally find that only PVE allow me to use SR-IOV. As my switch port is not enough, I would like to know if it is possible to use VF as the management interface. I follow this guide...

I modify the monitor to SPICE and adjust the console setting. Now I can see more details on the console It said "BIOS or ACPI interrupt routing problem", do it related to my Host (X9SRG-F) BIOS or it is the VM bios issue?

Hi everyone, recently I bought an old 1U X9 Supermicro server. I installed Proxmox VE 7.0 but I find that I am not able to passthrough the Mellanox ConnectX-2 10GbE NIC to my TrueNAS VM. I follow to this guide https://pve.proxmox.com/pve-docs/pve-admin-guide.html#qm_pci_passthrough Added...

We might focus on different point. Let's me clarify my procedure and current target. My hardware in the test is Lenovo ThinkPad T450s, a laptop with Intel i5 5200U (2C4T), 20GB DDR3L-1600, 250GB 2.5" SATA SSD (Windows 10 Home), 16GB M.2. 2242 SATA SSD. The Bluetooth devices I am using are...

Thank you very much, Joris. Here is the new dmesg which I added the notintxmask=1 in /etc/modprobe.d/vfio.conf Look like IOMMU not work after added this option I found I just change the intel_iommu=on to intel_iommu=force_isolation without understanding I would like to have a crosscheck...

Understand, thank you very much to explain about the PCI Passthrough. Unfortunately I don't a spare device to install a Windows VM for testing, under this condition, I would suspend the testing, backup the entire Windows disk and install the VM with SSD Passthrough to see any difference. Btw...

So I should edit the vfio.conf to only these device? like options vfio-pci ids=8086:1616,8086:160c,10de:1347 disable_vga=1 disable_idle_d3=1 nointmask=1 but I met this error when added nointmask=1, does it mean that the option is not available in Proxmox 5.4-15? [ 3.588237] vfio_pci...

nointmask=1 already exists. I would like to know if "vfio-pci ids" you mean is equal to the PCI device. Currently I have tried all combination of the five device I added to vfio-pci, except the Intel chipset controller. I would like to know more about the meaning of log. Is these messages...

ok, I updated the grub and reboot root@pve:~# cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.15.18-29-pve root=/dev/mapper/pve-root ro quiet intel_iommu=on iommu=pt pcie_acs_override=downstream,multifunction pci=nobar,noats nofb text nomodeset video=vesafb:off,efifb:off

Seems there is no option to install the 64bit QXL-WDDM-DOD in the virtio-win-0.1.185-1.iso Also, applying the "nobar" and "text" in grub, the dmesg become shorter.

Thank you for your reply. Here is the dmesg, I found that the PCIe address seems to have error, all ffffffff:ffffffff and no classes. Before I open the WIndows as VM, I had installed the virtio-win-gt-x64.msi in virtio-win-0.1.185-1.iso, but I am not sure the gt-x64 msi include the qemu-ga. I...

I have tried both Unraid and ESXi, only unraid recognise the Wi-Fi as USB device, but have malfunction, always disconnect... Under this condition, what could i do to make any PCI passthrough device work in Proxmox VE?

I would like to know what is the problem, is my laptop Vt-d is broken?